Download or read book Deformation Strain and Flow written by Markus Reiner and published by . This book was released on 1969 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Mechanisms Rheology and Tectonics written by Siese de Meer and published by Geological Society of London. This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motion and deformation of rocks are processes of fundamental importance in shaping the Earth, from outer crustal layers to the deep mantle. Reconstructions of the evolution of the Earth therefore require detailed knowledge of the geometry of deformation structures and their relative timing, of the motions leading to deformation structures and of the mechanisms governing these motions. This volume contains a collection of 22 papers on field, experimental and theoretical studies that add to our knowledge of these processes.
Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book An Introduction to Rheology written by Howard A. Barnes and published by Elsevier. This book was released on 1989-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the subject of rheology in terms understandable to non-experts and describes the application of rheological principles to many industrial products and processes.
Download or read book Rheology written by Frederick R. Eirich and published by Academic Press. This book was released on 2014-05-12 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology: Theory and Applications, Volume 5 focuses on overtly fluid behavior of polymers, including the theory of large deformations, thermoelastic effects, elastic phenomena observed during the extrusion of polymeric melts, and theories of the structure of liquids and glasses. The selection first elaborates on the application of large deformation theory to the thermomechanical behavior of rubberlike polymers and unstable flow of molten polymers. Discussions focus on the mechanism proposed for unstable flow, ripple and associated effects, direct observation of waviness phenomena, empirical behavior of porous, unfilled, and filled rubberlike polymers, and problems connected with the interpretation of mechanical response parameters. The text then examines elasticity effects in polymer extrusion and strength and extensibility of elastomers. The publication takes a look at free volume and polymer rheology and studies of the deformation of crystalline polymers. Topics include the contribution of the two orientation processes to the birefringence, deformation of superstructure, rate of orientation of crystalline regions, free volume and physical state, glass transition and free volume, and reappraisal of time-temperature superposition. The manuscript also elaborates on the deformation and dissipative processes in high polymeric solids and the thermodynamics of deformation. The selection is a vital source of data for researchers interested in the theories and applications of rheology.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Polymer Rheology written by R.S. Lenk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything flows, so rheology is a universal science. Even if we set aside claims of such width, there can be no doubt of its importance in polymers. It joins with chemistry in the polymerisation step but polymer engineering is supreme in all the succeeding steps. This is the area concerned with the fabrication of the polymer into articles or components, with their design to meet the needs in service, and with the long and short term performance of the article or component. This is a typical area of professional engineering activity, but one as yet without its proper complement of professional engineers. An understanding of polymer rheology is the key to effective design and material plus process selection, to efficient fabrication, and to satisfactory service, yet few engineers make adequate use of what is known and understood in polymer rheology. Its importance in the flow processes of fabrication is obvious. Less obvious, but equally important, are the rheological phenomena which determine the in-service performance. There is a gap between the polymer rheologist and the polymer engineer which is damaging to both parties and which contributes to a less than satisfactory use of polymers in our society. It is important that this gap be filled and this book makes an attempt to do so. It presents an outline of what is known in a concise and logical fashion. It does this starting from first principles and with the minimum use of complex mathematics.
Download or read book Introduction to Polymer Rheology written by Montgomery T. Shaw and published by John Wiley & Sons. This book was released on 2012-01-03 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the rheology of polymers Designed for practicing scientists and engineers interested in polymer rheology science, education, consulting, or research and development, Introduction to Polymer Rheology is a comprehensive yet accessible guide to the study of the deformation and flow of matter under applied stress. Often considered a complicated topic for beginners, the book makes grasping the fundamentals of polymer rheology easy by presenting information in an approachable way and limiting the use of complex mathematics. By doing so, this introductory overview provides readers with easy access to the key concepts underlying the flow behavior of polymer melts, solutions, and suspensions. Incorporating sample problems that are worked through and explained on the page, as well as numerous practice problems to gauge learning comprehension, the book prepares new students and practitioners for moving on to more advanced concepts. Comprising twelve chapters, the book covers stress, velocity and rate of deformation, the relationship between stress and rate of deformation (Newtonian fluid), generalized Newtonian fluids, normal stresses and elastic behavior, experimental methods, small and large strain, the molecular origins of rheological behavior, elementary polymer processing concepts, quality control in rheology, and the flow of modified polymers and those with supermolecular structure. The essential reference for accurately interpreting polymer rheology data, Introduction to Polymer Rheology provides readers with an elementary understanding of the key issues and modern approaches to resolving problems in the field.
Download or read book The Physics of Deformation and Flow written by Ernest William Billington and published by . This book was released on 1981 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Snow Ice and Glaciers written by Vijay P. Singh and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 1301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earth’s cryosphere, which includes snow, glaciers, ice caps, ice sheets, ice shelves, sea ice, river and lake ice, and permafrost, contains about 75% of the earth’s fresh water. It exists at almost all latitudes, from the tropics to the poles, and plays a vital role in controlling the global climate system. It also provides direct visible evidence of the effect of climate change, and, therefore, requires proper understanding of its complex dynamics. This encyclopedia mainly focuses on the various aspects of snow, ice and glaciers, but also covers other cryospheric branches, and provides up-to-date information and basic concepts on relevant topics. It includes alphabetically arranged and professionally written, comprehensive and authoritative academic articles by well-known international experts in individual fields. The encyclopedia contains a broad spectrum of topics, ranging from the atmospheric processes responsible for snow formation; transformation of snow to ice and changes in their properties; classification of ice and glaciers and their worldwide distribution; glaciation and ice ages; glacier dynamics; glacier surface and subsurface characteristics; geomorphic processes and landscape formation; hydrology and sedimentary systems; permafrost degradation; hazards caused by cryospheric changes; and trends of glacier retreat on the global scale along with the impact of climate change. This book can serve as a source of reference at the undergraduate and graduate level and help to better understand snow, ice and glaciers. It will also be an indispensable tool containing specialized literature for geologists, geographers, climatologists, hydrologists, and water resources engineers; as well as for those who are engaged in the practice of agricultural and civil engineering, earth sciences, environmental sciences and engineering, ecosystem management, and other relevant subjects.
Download or read book Deformation Mechanisms Rheology and Tectonics written by D. Gapais and published by Geological Society of London. This book was released on 2005 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of 18 papers on deformation mechanisms, rheology and tectonics. The main approaches include experimental rock deformation, microstructural analysis, field structural studies, analogue and numerical modelling. New results on various topics are presented, ranging from brittle to ductile deformation and grain-scale to lithospherescale mechanisms. The volume contains review papers on several major current topics, such as the rheology of the lithospheric mantle and the mechanisms of exhumation of high-pressure tectonic units, as well as research papers on kinematic and mechanical analysis of rock deformation and related new techniques. Several contributions emphasize the increasing ability and wish of researchers to strengthen the links between small-scale physical mechanisms and large-scale tectonics. The volume will be of interest to academic and industrial researchers in the fields of structural geology, interactions between metamorphism, fluids and deformation, and large-scale tectonic processes.
Download or read book The Rheology Handbook written by Thomas G. Mezger and published by Vincentz Network GmbH & Co KG. This book was released on 2006 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinematics and Dynamics of Lava Flows written by Michael Manga and published by Geological Society of America. This book was released on 2005-01-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manga (earth and planetary science, University of California-Berkeley) and Ventura (Instituto Nazionale di Geofisica e Vulcanologia, Italy) overview of the current understanding of the physical, thermal, and chemical processes governing the flow of lava and report on the latest methods for interpreting prehistoric flows. The collected papers encompass volcanological, petrological, and structural studies using numerical and experimental modeling, field studies, remote sensing, and geographic information systems. There is no subject index. Annotation ©2006 Book News, Inc., Portland, OR (booknews.com).
Download or read book Aviation Fuels with Improved Fire Safety written by National Research Council and published by National Academies Press. This book was released on 1997-09-18 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of the fire hazard of fuel is critical to improving survivability in impact-survivable aircraft accidents. Despite current fire prevention and mitigation approaches, fuel flammability can overwhelm post-crash fire scenarios. The Workshop on Aviation Fuels with Improved Fire Safety was held November 19-20, 1996 to review the current state of development, technological needs, and promising technology for the future development of aviation fuels that are most resistant to ignition during a crash. This book contains a summary of workshop discussions and 11 presented papers in the areas of fuel and additive technologies, aircraft fuel system requirements, and the characterization of fuel fires.
Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material's performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this.The deformation and processing of structural materials is divided into eight chapters, each one exploring a material's processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials.The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. - Contains research on the preformance of materials - Valuable resource for researchers in mechanical, civil and structural engineering - Comprehensive coverage to the deformation and processing of all types of structural materials
Download or read book Microtectonics written by C.W. Passchier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microtectonics is the interpretation of small-scale deformation structures in rocks. They are studied by optical microscope and contain abundant information on the history and type of deformation and metamorphism in a rock and are therefore used by most geologists to obtain data for large-scale geological interpretations. This advanced textbook contains a large number of photographs and explanatory drawings, special chapters on related techniques, a chapter on microgauges and a simple, non-mathematical treatment of continuum mechanics with practical examples. Special terms are explained in boxes. This textbook is suited for independent use during optical studies on microstructures as a reference manual and as a manual for short courses.
Download or read book Viscoelastic Properties of Polymers written by John D. Ferry and published by John Wiley & Sons. This book was released on 1980-09-16 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic behavior reflects the combined viscous and elastic responses, under mechanical stress, of materials which are intermediate between liquids and solids in character. Polymers the basic materials of the rubber and plastic industries and important to the textile, petroleum, automobile, paper, and pharmaceutical industries as well exhibit viscoelasticity to a pronounced degree. Their viscoelastic properties determine the mechanical performance of the final products of these industries, and also the success of processing methods at intermediate stages of production. Viscoelastic Properties of Polymers examines, in detail, the effects of the many variables on which the basic viscoelastic properties depend. These include temperature, pressure, and time; polymer chemical composition, molecular weight and weight distribution, branching and crystallinity; dilution with solvents or plasticizers; and mixture with other materials to form composite systems. With guidance by molecular theory, the dependence of viscoelastic properties on these variables can be simplified by introducing certain ancillary concepts such as the fractional free volume, the monomeric friction coefficient, and the spacing between entanglement loci, to provide a qualitative understanding and in many cases a quantitative prediction of how to achieve desired results. The phenomenological theory of viscoelasticity which permits interrelation of the results of different types of experiments is presented first, with many useful approximation procedures for calculations given. A wide variety of experimental methods is then described, with critical evaluation of their applicability to polymeric materials of different consistencies and in different regions of the time scale (or, for oscillating deformations, the frequency scale). A review of the present state of molecular theory follows, so that viscoelasticity can be related to the motions of flexible polymer molecules and their entanglements and network junctions. The dependence of viscoestic properties on temperature and pressure, and its descriptions using reduced variables, are discussed in detail. Several chapters are then devoted to the dependence of viscoelastic properties on chemical composition, molecular weight, presence of diluents, and other features, for several characteristic classes of polymer materials. Finally, a few examples are given to illustrate the many potential applications of these principles to practical problems in the processing and use of rubbers, plastics, and fibers, and in the control of vibration and noise. The third edition has been brought up to date to reflect the important developments, in a decade of exceptionally active research, which have led to a wider use of polymers, and a wider recognition of the importance and range of application of viscoelastic properties. Additional data have been incorporated, and the book s chapters on dilute solutions, theory of undiluted polymers, plateau and terminal zones, cross-linked polymers, and concentrated solutions have been extensively rewritten to take into account new theories and new experimental results. Technical managers and research workers in the wide range of industries in which polymers play an important role will find that the book provides basic information for practical applications, and graduate students in chemistry and engineering will find, in its illustrations with real data and real numbers, an accessible introduction to the principles of viscoelasticity.
