Download or read book Deformation of Metals During Rolling written by I. Ya. Tarnovskii and published by Elsevier. This book was released on 2013-10-22 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation of Metals during Rolling discusses the ductility of metal. The book explores the implication of the theory of flat cross section. The said theory explains that flat transverse-vertical cross-sections before deformation remain flat both in the zone of deformation and after rolling. Such theory has been accepted until some research appeared that opposed the basic view in the theory of rolling. Another theory discussed is the theory of inhomogeneous deformation. The book focuses on the fundamental hypotheses of the mechanics of continuous media. It also covers topics such as the creation of model of deformation that closely resembles the real conditions of the rolling process and the determination of boundary conditions. A section in the book presents information on the degree of the deformation of metal during compression. The text can be a good reference for industrial engineers and academic students doing research on the properties of steel and iron.
Download or read book Primer on Flat Rolling written by John G. Lenard and published by Newnes. This book was released on 2013-12-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primer on Flat Rolling is a fully revised second edition, and the outcome of over three decades of involvement with the rolling process. It is based on the author's yearly set of lectures, delivered to engineers and technologists working in the rolling metal industry. The essential and basic ideas involved in designing and analysis of the rolling process are presented. The book discusses and illustrates in detail the three components of flat rolling: the mill, the rolled metal, and their interface. New processes are also covered; flexible rolling and accumulative roll-bonding. The last chapter contains problems, with solutions that illustrate the complexities of flat rolling. New chapters include a study of hot rolling of aluminum, contributed by Prof. M. Wells; advanced applications of the finite element method, by Dr. Yuli Liu and by Dr. G. Krallics; roll design by Dr. J. B. Tiley and the history of the development of hot rolling mills, written by Mr. D. R. Adair and E. B. Intong. Engineers, technologists and students can all use this book to aid their planning and analysis of flat rolling processes. Provides clear descriptions for engineers and technologists working in steel mills Evaluates the predictive capabilities of mathematical models Assignments and their solutions are included within the text
Download or read book Deformation of Metals During Rolling written by I. Y. Tarnovskii and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications of Metal Rolling written by Siddhartha Ray and published by Cambridge University Press. This book was released on 2016-04-21 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling is an important metal forming process which involves the passing of metal stock through a pair of rollers. It is categorized depending on the recrystallization temperature of the metal rolled. This book covers the entire gamut of rolling technology in one volume. It begins with a brief history of rolling, and goes on to discuss different rolling processes, the deformation of materials, and the classification of rolling mills and stands. The book discusses rolling applications of steel blooms, slabs, bars, plates, rods, heavy sections and non-ferrous metals in detail. It covers important rolling process parameters, including rolling friction, stress and strain across rolled strip thickness, rolling torque and power and roll separation force. It also provides details on the design and applications of various rolling equipment, including mill rolls, neck bearings, spindles, coilers and decoilers.
Download or read book Deformation of Metals During Rolling written by A. Shutt and published by . This book was released on 1965 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation of Metals During Rolling translated from the Russian written by Tarnovskii IYa and published by . This book was released on 1965 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Processing written by Walter A. Backofen and published by . This book was released on 1972 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation of Metals During Rollings written by Y. Tarnovskii and published by Pergamon. This book was released on 1965 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book Flat Rolling Fundamentals written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2000-06-30 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles information from physics, metallurgy, and mechanical and electrical engineering to epitomize the fundamental characteristics of flat rolling steel. Flat Rolling Fundamentals is drawn from in-depth analyses of metal properties and behaviors to technologies in application. The book provides a full characterization of steel, including structure, chemical composition, classifications, physical properties, deformation, and plasticity. The authors present different types of rolling mills and the defining physical analytical parameters.They also discuss the effects of hot rolling on steel and the role of lubrication and thermomechanical treatments to minimize these effects. This book presents qualitative and quantitative advances in cost-effective steel production.
Download or read book Metal Micro forming written by Ken-ichi Manabe and published by MDPI. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The miniaturization of industrial products is a global trend. Metal forming technology is not only suitable for mass production and excellent in productivity and cost reduction, but it is also a key processing method that is essential for products that utilize advantage of the mechanical and functional properties of metals. However, it is not easy to realize the processing even if the conventional metal forming technology is directly scaled down. This is because the characteristics of materials, processing methods, die and tools, etc., vary greatly with miniaturization. In metal micro forming technology, the size effect of major issues for micro forming have also been clarified academically. New processing methods for metal micro forming have also been developed by introducing new special processing techniques, and it is a new wave of innovation toward high precision, high degree of processing, and high flexibility. To date, several special issues and books have been published on micro-forming technology. This book contains 11 of the latest research results on metal micro forming technology. The editor believes that it will be very useful for understanding the state-of-the-art of metal micro forming technology and for understanding future trends.
Download or read book The Rolling of Strip Sheet and Plate written by Eustace C. Larke and published by . This book was released on 1957 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Rolling of Steel written by Roberts and published by Routledge. This book was released on 2017-11-22 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the publication of this book, newcomers to the field of steel rolling have a complete introductionto the cold rolling process, including the history of cold rolling, the equipment currentlyin use, the behavior of the rolling lubricant, the thermal and metallurgical aspects of the subject,mathematical models relating to rolling force and power requirements, strip shape, and thefurth er processing of cold-rolled steel. The first book in print to examine in detail the three componentsof the cold-rolling process- the mill, the work-piece, and the rolling lubricant-this bookcan be used as a training manual and as a source for reference and research. The manuscript version of this book has already been in use as a textbookin courses on cold rolling and rolling lubrication and is now published for thebenefit of all in-training personnel-both operating and supervisory-in theprimary metals industry and for undergraduate and graduate students inmetalworking. The interrelationships of the three components, described in terms ofmathematical models, are of considerable value to engineers associated withprimary metals and metal research, to mill builders, and to electrical equipmentsuppliers. For plant metallurgists, the book relates product quality to operating conditions;for the steel user and purchaser, it affords insight into the variousprocesses associated with the manufacture of steel sheet and strip.
Download or read book Deformation of metals in compression and rolling and the effects of friction thereupon written by Frederick Robert Hose and published by . This book was released on 1964 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DEFORMATION OF METAL IN ROLLING written by I. FRANTESEVICH and published by . This book was released on 1940 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt:
