Download or read book Defects at Oxide Surfaces written by Jacques Jupille and published by Springer. This book was released on 2015-02-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties have yet to be developed. The book gives guidance to tailor oxide surfaces by controlling the nature and concentration of defects. The importance of defects in the physics and chemistry of metal oxide surfaces is presented in this book together with the prominent role of oxides in common life. The book contains contributions from leaders in the field. It serves as a reference for experts and beginners in the field.
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book The Surface Science of Metal Oxides written by Victor E. Henrich and published by Cambridge University Press. This book was released on 1994 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Physics and Chemistry at Oxide Surfaces written by Claudine Noguera and published by Cambridge University Press. This book was released on 1996-09-28 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first chapter of the book summarizes classical approaches, introduces the concept of ionicity, and describes the mixed iono-covalent character of the oxygen cation bond in bulk materials. The next three chapters focus on the characteristics of the atomic structure (relaxation, rumpling and reconstruction effects), the electronic structure (band width, gap width, etc.) and the excitations of clean surfaces.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Defects in SiO2 and Related Dielectrics Science and Technology written by Gianfranco Pacchioni and published by Springer Science & Business Media. This book was released on 2000-12-31 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Erice, Italy, April 8-20, 2000
Download or read book Metal Oxide Defects written by Vijay Kumar and published by Elsevier. This book was released on 2022-11-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. - Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials - Introduces defect engineering applied to the design of metal oxide materials with desirable properties - Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics
Download or read book Metal Oxide Catalysis 2 Volume Set written by S. David Jackson and published by John Wiley & Sons. This book was released on 2008-11-24 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its two-volume structure, this handbook and ready reference allows for comprehensive coverage of both characterization and applications, while uniform editing throughout ensures that the structure remains consistent. The result is an up-to-date review of metal oxides in catalysis. The first volume covers a range of techniques that are used to characterize oxides, with each chapter written by an expert in the field. Volume 2 goes on to cover the use of metal oxides in catalytic reactions. For all chemists and engineers working in the field of heterogeneous catalysis.
Download or read book Charged Semiconductor Defects written by Edmund G. Seebauer and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in semiconductors have been studied for many years, in many cases with a view toward controlling their behaviour through various forms of “defect engineering”. For example, in the bulk, charging significantly affects the total concentration of defects that are available to mediate phenomena such as solid-state diffusion. Surface defects play an important role in mediating surface mass transport during high temperature processing steps such as epitaxial film deposition, diffusional smoothing in reflow, and nanostructure formation in memory device fabrication. “Charged Defects in Semiconductors” details the current state of knowledge regarding the properties of the ionized defects that can affect the behaviour of advanced transistors, photo-active devices, catalysts, and sensors. Features: group IV, III-V, and oxide semiconductors; intrinsic and extrinsic defects; and, point defects, as well as defect pairs, complexes and clusters.
Download or read book Non Stoichiometric Compounds written by J. Nowotny and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this book is based on invited and contributed pa pers presented at the NATO Advanced Research Workshop on INon-stoichio l metric Compounds held in Ringberg Castle, Rottach-Egern (Bavarian Alps), Germany, July 3-9, 1988. The workshop followed previous meetings held in Mogilany, Poland (1980), Alenya, France (1982), Penn State, USA (1984) and Keele University, UK (1986). The aim of these workshops is to present and discuss up-to-date knowledge in the study of non-stoichiometry and its effect on materials properties as well as to indicate the most urgent research pathways required in this field. Since the subject of non-stoichiometry is interdisciplinary, the workshops bring together solid state physicists and chemists, surface scientists, materials scientists, ceramists and metallurgists. The present workshop, which gathered 42 scientists of an inter national reputation, mainly considered the effect of surfaces, grain boundaries and structural defects on materials properties. From discus sions during this meeting it emerged that correct understanding of properties of ceramic materials requires urgent studies on the defect structure of the interface region. Progress in this direction requires the development of the interface defect chemistry. This is the task for materials scientists in the near future. The present proceedings includes both theoretical and experimen tal work on general aspects of non-stoichiometry, defect structure and diffusion in relation to the bulk and to the interface region of such materials as high tech ceramics, solid electrolytes, electronic cera mics, nuclear materials and high Tc oxide superconductors.
Download or read book The Defect Chemistry of Metal Oxides written by Donald Morgan Smyth and published by Oxford University Press on Demand. This book was released on 2000 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Defect Chemistry of Metal Oxides is a unique introduction to the equilibrium chemistry of solid inorganic compounds with a focus on metal oxides. Accessible to students with little or no background in defect chemistry, it explains how to apply basic principles and interpret the related behavior of materials. Topics discussed include lattice and electronic defects, doping effects, nonstoichiometry, and mass and charge transport. The text distinctly emphasizes the correlation between the general chemical properties of the constituent elements and the defect chemistry and transport properties of their compounds. It covers the types of defects formed, the effects of dopants, the amount and direction of nonstoichiometry, the depths of acceptor and donor levels, and more. Concluding chapters present up-to-date and detailed analyses of three systems: titanium dioxide, cobalt oxide and nickel oxide, and barium titanate. The Defect Chemistry of Metal Oxides is the only book of its kind that incorporates sample problems for students to solve. Suitable for a variety of courses in materials science and engineering, chemistry, and geochemistry, it also serves as a valuable reference for researchers and instructors.
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Download or read book Adsorption and Catalysis on Oxide Surfaces written by M. Che and published by Elsevier. This book was released on 1985-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium was held to honour the memory of the late Dr. A.J. Tench who made numerous important contributions to our knowledge of the structure, reactivity and adsorption properties of oxide surfaces. This volume contains an up-to-date picture of adsorption and catalysis on oxide surfaces, not in the form of a comprehensive review but in its living aspects of work in progress. It describes detailed studies on the determination of the coordination surface ions, particularly oxide ions, by photoluminescence and reflectance spectroscopy, on the identification of adsorbed species by magnetic optical or surface techniques and on catalysis, with emphasis on new concepts such as catalysis involving excited states or structure sensitive reactions.Professionals working in the industrial and academic laboratories will find the book particularly useful as it provides a state-of-the-art account of our understanding of the structure and adsorption characteristics of oxide surfaces. Contained in the book are first class research papers by leading exponents in this field. A very important issue is that the book highlights for the first time the importance of excited states and structure sensitivity in determining the behaviour of oxide surfaces.
Download or read book Functional Metal Oxides written by Satishchandra Balkrishna Ogale and published by John Wiley & Sons. This book was released on 2013-11-08 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional oxides are used both as insulators and metallic conductors in key applications across all industrial sectors. This makes them attractive candidates in modern technology ? they make solar cells cheaper, computers more efficient and medical instrumentation more sensitive. Based on recent research, experts in the field describe novel materials, their properties and applications for energy systems, semiconductors, electronics, catalysts and thin films. This monograph is divided into 6 parts which allows the reader to find their topic of interest quickly and efficiently. * Magnetic Oxides * Dopants, Defects and Ferromagnetism in Metal Oxides * Ferroelectrics * Multiferroics * Interfaces and Magnetism * Devices and Applications This book is a valuable asset to materials scientists, solid state chemists, solid state physicists, as well as engineers in the electric and automotive industries.
Download or read book Defects in Solids written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2008-10-10 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough understanding of the chemistry and physics of defects, enabling the reader to manipulate them in the engineering of materials. Reinforces theoretical concepts by placing emphasis on real world processes and applications. Includes two kinds of end-of-chapter problems: multiple choice (to test knowledge of terms and principles) and more extensive exercises and calculations (to build skills and understanding). Supplementary material on crystallography and band structure are included in separate appendices.
Download or read book Encyclopedia of Glass Science Technology History and Culture Two Volume Set written by Pascal Richet and published by John Wiley & Sons. This book was released on 2021-02-05 with total page 1568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia begins with an introduction summarizing itsscope and content. Glassmaking; Structure of Glass, GlassPhysics,Transport Properties, Chemistry of Glass, Glass and Light,Inorganic Glass Families, Organic Glasses, Glass and theEnvironment, Historical and Economical Aspect of Glassmaking,History of Glass, Glass and Art, and outlinepossible newdevelopments and uses as presented by the best known people in thefield (C.A. Angell, for example). Sections and chapters arearranged in a logical order to ensure overall consistency and avoiduseless repetitions. All sections are introduced by a briefintroduction and attractive illustration. Newly investigatedtopics will be addresses, with the goal of ensuring that thisEncyclopedia remains a reference work for years to come.
Download or read book Elements of Structures and Defects of Crystalline Materials written by Tsang-Tse Fang and published by Elsevier. This book was released on 2018-01-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Structures and Defects of Crystalline Materials has been written to cover not only the fundamental principles behind structures and defects, but also to provide deep insights into understanding the relationships of properties, defect chemistry and processing of the concerned materials. Part One deals with structures, while Part Two covers defects. Since the knowledge of the electron configuration of elements is necessary for understanding the nature of chemical bonding, it is discussed in the opening chapter. Chapter Two then describes the bonding formation within the crystal structures of varied materials, with Chapter Three delving into how a material's structure is formed. In view of the importance of the effects of the structure distortion on the material properties due to the fields, the related topics have been included in section 3.4. Moreover, several materials still under intensive investigation have been illustrated to provide deep insights into understanding the effects of the relationships of processing, structures and defects on the material properties. The defects of materials are explored in Part II. Chapter 4 deals with the point defects of metal and ceramics. Chapter 5 covers the fundamentals of the characteristics of dislocations, wherein physics and the atomic mechanics of several issues have been described in detail. In view of the significant influence of the morphologies including size, shape and distribution of grains, phases on the microstructure evolution, and, in turn, the properties of materials, the final chapter focuses on the fundamentals of interface energies, including single phase (grain) boundary and interphase boundary. - Discusses the relationship between properties, defect chemistry and the processing of materials - Presents coverage of the fundamental principles behind structures and defects - Includes information on two-dimensional and three-dimensional imperfections in solids
