Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Hydrogen Effects in Materials written by Anthony W. Thompson and published by John Wiley & Sons. This book was released on 2013-09-27 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Fifth International Conference on the Effect of Hydrogen on the Behavior of Materials sponsored by the Structural Materials Division (SMD) Mechanical Metallurgy and Corrosion & Environmental Effects Committees of The Minerals, Metals & Materials Society held at Jackson Lake Lodge, Moran, Wyoming, September 11-14, 1994.
Download or read book Metal Failures written by A. J. McEvily and published by John Wiley & Sons. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: * Reach correct, fact-based conclusions on the causes of metal failures * Present and defend these conclusions before highly critical bodies * Suggest design improvements that may prevent future failures Analytical methods presented include stress analysis, fracture mechanics, fatigue analysis, corrosion science, and nondestructive testing. Numerous case studies illustrate the application of basic principles of metallurgy and failure analysis to a wide variety of real-world situations. Readers learn how to investigate and analyze failures that involve: * Alloys and coatings * Brittle and ductile fractures * Thermal and residual stresses * Creep and fatigue * Corrosion, hydrogen embrittlement, and stress-corrosion cracking This useful professional reference is also an excellent learning tool for senior-level students in mechanical, materials, and civil engineering.
Download or read book Metallurgical Failure Analysis written by Kannadi Palankeezhe Balan and published by Elsevier. This book was released on 2018-01-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Failure Analysis: Techniques and Case Studies explores how components fail and what measures should be taken to avoid future failures. The book introduces the subject of failure analysis; covers the fundamentals and methodology of failure analysis, including fracture and fractography of metals and alloys and the tools and techniques used in a failure investigation; examines 37 case studies on high performance engineering components; features experimental results comprised of visual-, fractographic-, or metallographic- examination, hardness measurements and chemical analysis; includes illustrations and evidence obtained through test results to enhance understanding; and suggests suitable remedial measures when possible. The various case studies are classified according to the major causes of failures. The case studies pertain to: Improper Material Selection, Manufacturing Defects, Casting Defects, Overload, Fatigue, Corrosion Induced Failures, Hydrogen Embrittlement and Stress Corrosion Cracking, Wear and Elevated Temperature Failures. The book contains information gathered over three decades of the author's experience handling a variety of failure cases and will go a long way toward inspiring practicing failure analysts. The book is designed for scientists, metallurgists, engineers, quality control inspectors, professors and students alike. - Explores the fundamentals and methodology of failure analysis - Examines the major causes of component failures - Teaches a systematic approach to investigation to determine the cause of a failure - Features 37 case studies on high performance engineering components
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Why Metals Fail written by R. D. Barer and published by CRC Press. This book was released on 1970 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Failures written by Arthur J. McEvily and published by John Wiley & Sons. This book was released on 2013-09-16 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the only texts available to cover not only how failure occurs but also examine methods developed to expose the reasons for failure, Metal Failures has long been considered the most definitive and authoritative resources in metallurgical failure analysis. Now in a completely revised edition, this Second Edition features updates of all chapters plus new coverage of elastic behavior and plastic deformation, localized necking, the phenomenological aspects of fatigue, fatigue crack propagation, alloys and coatings, tensors and tensor notations, and much more.
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book ASM Metals Reference Book 3rd Edition written by Michael Bauccio and published by ASM International. This book was released on 1993-01-01 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book makes it easy for anyone involved in materials selection, or in the design and manufacture of metallic structural components to quickly screen materials for a particular application. Information on practically all ferrous and nonferrous metals including powder metals is presented in tabular form for easy review and comparison between different materials. Included are chemical compositions, physical and mechanical properties, manufacturing processes, applications, pertinent specifications and standards, and test methods. Contents Overview: Glossary of metallurgical terms Selection of structural materials (specifications and standards, life cycle and failure modes, materials properties and design, and properties and applications) Physical data on the elements and alloys Testing and inspection Chemical composition and processing characteristics
Download or read book Failure Analysis and Fractography of Polymer Composites written by Emile Greenhalgh and published by Elsevier. This book was released on 2009-09-28 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of polymer composites is leading to increasing demand for fractographic expertise. Fractography is the study of fracture surface morphologies and it gives an insight into damage and failure mechanisms, underpinning the development of physically-based failure criteria. In composites research it provides a crucial link between predictive models and experimental observations. Finally, it is vital for post-mortem analysis of failed or crashed polymer composite components, the findings of which can be used to optimise future designs.Failure analysis and fractography of polymer composites covers the following topics: methodology and tools for failure analysis; fibre-dominated failures; delamination-dominated failures; fatigue failures; the influence of fibre architecture on failure; types of defect and damage; case studies of failures due to overload and design deficiencies; case studies of failures due to material and manufacturing defects; and case studies of failures due to in-service factors.With its distinguished author, Failure analysis and fractography of polymer composites is a standard reference text for researchers working on damage and failure mechanisms in composites, engineers characterising manufacturing and in-service defects in composite structures, and investigators undertaking post-mortem failure analysis of components. The book is aimed at both academic and industrial users, specifically final year and postgraduate engineering and materials students researching composites and industry designers and engineers in aerospace, civil, marine, power and transport applications. - Examines the study of fracture surface morphologies in uderstanding composite structural behaviour - Discusses composites research and post-modern analysis of failed or crashed polymer composite components - Provides an overview of damage mechanisms, types of defect and failure criteria
Download or read book Fatigue and Fracture of Weldments written by Uwe Zerbst and published by Springer. This book was released on 2018-12-11 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and thorough guide to those readers who are lost in the often-confusing context of weld fatigue. It presents straightforward information on the fracture mechanics and material background of weld fatigue, starting with fatigue crack initiation and short cracks, before moving on to long cracks, crack closure, crack growth and threshold, residual stress, stress concentration, the stress intensity factor, J-integral, multiple cracks, weld geometries and defects, microstructural parameters including HAZ, and cyclic stress-strain behavior. The book treats all of these essential and mutually interacting parameters using a unique form of analysis.
Download or read book Handbook of Materials Failure Analysis written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2019-10-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Electronics Industries examines the reasons materials fail in certain situations, including material defects and mechanical failure as a result of various causes. The book begins with a general overview of materials failure analysis and its importance. It then proceeds to discussions on the types of failure analysis, specific tools and techniques, and an analysis of materials failure from various causes. As failure can occur for several reasons, including materials defects-related failure, materials design-related failure, or corrosion-related failures, the topics covered in this comprehensive source are an important tool for practitioners. - Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge and current research on the latest developments and innovations in the field - Offers an ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, and fatigue life prediction - Presents compelling new case studies from key industries to demonstrate concepts
Download or read book The Mechanisms of Metallurgical Failure written by John Campbell and published by Butterworth-Heinemann. This book was released on 2020-05-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy of Fracture: The Mechanics of Metal Failure looks at the origin of metal defects, their related mechanisms of failure, and the modification of casting procedures to eliminate these defects, clearly connecting the strength and durability of metals with their fabrication process. The book starts with a focus on the fracture of liquids, looking at topics such as homogeneous and heterogeneous nucleation, entrainment processes in bifilms and bubbles, furling and unfurling, ingot casting, continuous casting, and more. From there it discusses fracture of liquid and solid state, focusing on topics such as externally and internally initiated tearing. The book then concludes with a section discussing fracture of solid metals covering concepts such as ductility and brittleness, dislocation mechanisms, the relationship between the microstructure and properties of metals, corrosion, hydrogen embrittlement, and more. Improved approaches to fabrication and casting processes that will help eliminate these defects are provided throughout. - Looks at how the fracture of metals originates in the liquid-state due to poor casting practices - Offers improved casting techniques to reduce liquid-state borne fracture - Draws attention to the parallels between fracture initiation in the liquid and solid states - Covers spall tests and how to improve material quality by hot isostatic pressing
Download or read book Handbook of Case Histories in Failure Analysis Volume 2 written by Khlefa Alarbe Esaklul and published by ASM International. This book was released on 1992-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents more than 120 expert failure analysis case histories from industries including automotive, aerospace, utilities, oil and gas, petrochemical, biomedical, ground transportation, off-highway vehicles, and more. Volume 2 builds on the tremendous acceptance of Volume 1 by the failure analysis community. The two volumes can also be purchased as a set for a special discounted price. Learn how others have investigated and solved failures in various industries involving a wide range of failure modes, materials, and analysis techniques.
Download or read book Failure Mechanisms in Alloys written by George A. Pantazopoulos and published by MDPI. This book was released on 2020-03-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of lean production and excellence in manufacturing, advancing with sustainable development, demands the rational utilization of raw materials and energy resources, adopting cleaner and environmentally-friendly industrial processes. In view of the new industrial revolution, through digital transformation, the exploitation of smart and sophisticated materials systems, the need of minimizing scrap and increasing efficiency, reliability and lifetime and, on the other hand, the pursuit of fuel economy and limitation of carbon footprint, are necessary conditions for the imminent growth in a highly competitive economy. Failure analysis is an interdisciplinary scientific topic, reflecting the opinions and interpretations coming from a systematic evidence-gathering procedure, embracing various important sectors, imparting knowledge, and substantiating improvement practices. The deep understanding of material/component role (e.g., rotating shaft, extrusion die, gas pipeline) and properties will be of central importance for fitness for purpose in certain industrial processes and applications. Finally, it is hoped and strongly believed that the accumulation of additional knowledge in the field of failure mechanisms and the adoption of the principles, philosophy, and deep understanding of failure analysis process approach will strongly promote the learning concept, as a continuously evolving process leading to personal and social progress and prosperity.
Download or read book An Introduction to the Study of Physical Metallurgy written by Walter Rosenhain and published by . This book was released on 1914 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
