Download or read book Defect Crystal Chemistry and Its Applications written by R. J. D. Tilley and published by Blackie Academic and Professional. This book was released on 1987 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications of Chemical Defects written by Richard J.D. Tilley and published by Routledge. This book was released on 2019-05-20 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides some insight into chemical defects in crystalline solids, focusing on the relationship between basic principles and device applications. It is concerned with the chemical, optical and electronic consequences of the presence of defects in crystals.
Download or read book Point Defects in Solids written by James H. Crawford and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal defects can no longer be thought of as a scientific curiosity, but must be considered an important aspect of solid-state science. This is largely because many of the more interesting properties of crystalline solids are disproportionately dominated by effects due to a tiny concentration of imperfections in an otherwise perfect lattice. The physics of such lattice defects is not only of significance in a great variety of applications, but is also interesting in its own right. Thus, an extensive science of point defects and dislocations has been constructed during the past two and a half decades. Stimulated by the technological and scientific interest in plasticity, there have appeared in recent years rather a large number of books dealing with dislocations; in the case of point defects, however, only very few broad and extensive treatments have been published. Thus, there are few compre hensive, tutorial sources for the scientist or engineer whose research ac tivities are affected by point defect phenomena, or who might wish to enter the field. It is partially to fill this need that the present treatise aims.
Download or read book Principles and Applications of Chemical Defects written by R. J. D. Tilley and published by . This book was released on 1998 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this text is to provide some insight into chemical defects in crystalline solids. Chemical defects, which are mistakes or changes in the atomic make-up of the crystals, have far-reaching effects on the composition, optical properties and electronic properties of materials.
Download or read book Solid State Chemistry and Its Applications written by Anthony R. West and published by John Wiley & Sons. This book was released on 1991-01-08 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first broad account offering a non-mathematical, unified treatment of solid state chemistry. Describes synthetic methods, X-ray diffraction, principles of inorganic crystal structures, crystal chemistry and bonding in solids; phase diagrams of 1, 2 and 3 component systems; the electrical, magnetic, and optical properties of solids; three groups of industrially important inorganic solids--glass, cement, and refractories; and certain aspects of organic solid state chemistry, including the ``organic metal'' of new materials.
Download or read book Elements of Structures and Defects of Crystalline Materials written by Tsang-Tse Fang and published by Elsevier. This book was released on 2018-01-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Structures and Defects of Crystalline Materials has been written to cover not only the fundamental principles behind structures and defects, but also to provide deep insights into understanding the relationships of properties, defect chemistry and processing of the concerned materials. Part One deals with structures, while Part Two covers defects. Since the knowledge of the electron configuration of elements is necessary for understanding the nature of chemical bonding, it is discussed in the opening chapter. Chapter Two then describes the bonding formation within the crystal structures of varied materials, with Chapter Three delving into how a material's structure is formed. In view of the importance of the effects of the structure distortion on the material properties due to the fields, the related topics have been included in section 3.4. Moreover, several materials still under intensive investigation have been illustrated to provide deep insights into understanding the effects of the relationships of processing, structures and defects on the material properties. The defects of materials are explored in Part II. Chapter 4 deals with the point defects of metal and ceramics. Chapter 5 covers the fundamentals of the characteristics of dislocations, wherein physics and the atomic mechanics of several issues have been described in detail. In view of the significant influence of the morphologies including size, shape and distribution of grains, phases on the microstructure evolution, and, in turn, the properties of materials, the final chapter focuses on the fundamentals of interface energies, including single phase (grain) boundary and interphase boundary. - Discusses the relationship between properties, defect chemistry and the processing of materials - Presents coverage of the fundamental principles behind structures and defects - Includes information on two-dimensional and three-dimensional imperfections in solids
Download or read book Chemistry written by Bruce Averill and published by . This book was released on 2007 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasises on contemporary applications and an intuitive problem-solving approach that helps students discover the exciting potential of chemical science. This book incorporates fresh applications from the three major areas of modern research: materials, environmental chemistry, and biological science.
Download or read book Crystallography and Crystal Defects written by Anthony Kelly and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic book that presents a unified approach to crystallography and the defects found within crystals, revised and updated This new edition of Crystallography and Crystal Defects explains the modern concepts of crystallography in a clear, succinct manner and shows how to apply these concepts in the analyses of point, line and planar defects in crystalline materials. Fully revised and updated, this book now includes: Original source references to key crystallographic terms familiar to materials scientists Expanded discussion on the elasticity of cubic materials New content on texture that contains more detail on Euler angles, orientation distribution functions and an expanded discussion on examples of textures in engineering materials Additional content on dislocations in materials of symmetry lower than cubic An expanded discussion of twinning which includes the description and classification of growth twins The inclusion and explanation of results from atomistic modelling of twin boundaries Problem sets with new questions, detailed worked solutions, supplementary lecture material and online computer programs for crystallographic calculations. Written by authors with extensive lecturing experience at undergraduate level, Crystallography and Crystal Defects, Third Edition continues to take its place as the core text on the topic and provides the essential resource for students and researchers in metallurgy, materials science, physics, chemistry, electrical, civil and mechanical engineering.
Download or read book Defects in Solids written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2008-10-10 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough understanding of the chemistry and physics of defects, enabling the reader to manipulate them in the engineering of materials. Reinforces theoretical concepts by placing emphasis on real world processes and applications. Includes two kinds of end-of-chapter problems: multiple choice (to test knowledge of terms and principles) and more extensive exercises and calculations (to build skills and understanding). Supplementary material on crystallography and band structure are included in separate appendices.
Download or read book Physics of Elasticity and Crystal Defects written by Adrian P. Sutton and published by Oxford University Press. This book was released on 2024-03-21 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of crystalline materials are almost always governed by the defects within them. The ability to shape metals and alloys into girders, furniture, automobiles and medical prostheses stems from the generation, motion and interaction of these defects. Crystal defects are also the agents of chemical changes within crystals, enabling mass transport by diffusion and changes of phase. The distortion of the crystal created by a defect enables it to interact with other defects over distances much greater than the atomic scale. The theory of elasticity is used to describe these interactions. Physics of Elasticity and Crystal Defects, 2nd Edition is an introduction to the theory of elasticity and its application to point defects, dislocations, grain boundaries, inclusions, and cracks. A unique feature of the book is the treatment of the relationship between the atomic structures of defects and their elastic fields. Another unique feature is the last chapter which describes five technologically important areas requiring further fundamental research, with suggestions for possible PhD projects. There are exercises for the student to check their understanding as they work through each chapter with detailed solutions. There are problems set at the end of each chapter, also with detailed solutions. In this second edition the treatment of the Eshelby inclusion has been expanded into a chapter of its own, with complete self-contained derivations of the elastic fields inside and outside the inclusion. This is a textbook for postgraduate students in physics, engineering and materials science. Even students and professionals with some knowledge of elasticity and defects will almost certainly find much that is new to them in this book.
Download or read book Encyclopedia of Geochemistry written by C.P. Marshall and published by Springer Science & Business Media. This book was released on 1999-07-31 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a complete and authoritative reference text on an evolving field. Over 200 international scientists have written over 340 separate topics on different aspects of geochemistry including organics, trace elements, isotopes, high and low temperature geochemistry, and ore deposits, to name just a few.
Download or read book Defects in Nanocrystals written by Sergio Pizzini and published by CRC Press. This book was released on 2020-05-11 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in Nanocrystals: Structural and Physico-Chemical Aspects discusses the nature of semiconductor systems and the effect of the size and shape on their thermodynamic and optoelectronic properties at the mesoscopic and nanoscopic levels. The nanostructures considered in this book are individual nanometric crystallites, nanocrystalline films, and nanowires of which the thermodynamic, structural, and optical properties are discussed in detail. The work: Outlines the influence of growth processes on their morphology and structure Describes the benefits of optical spectroscopies in the understanding of the role and nature of defects in nanostructured semiconductors Considers the limits of nanothermodynamics Details the critical role of interfaces in nanostructural behavior Covers the importance of embedding media in the physico-chemical properties of nanostructured semiconductors Explains the negligible role of core point defects vs. surface and interface defects Written for researchers, engineers, and those working in the physical and physicochemical sciences, this work comprehensively details the chemical, structural, and optical properties of semiconductor nanostructures for the development of more powerful and efficient devices.
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.
Download or read book Point Defects in Solids written by James H. Crawford and published by . This book was released on 2014-09-01 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastic Models of Crystal Defects written by Cristian Teodosiu and published by Springer. This book was released on 1982-03 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: for the computation of the elastic states of dislocation loops by means of straight dislocation data. Chapter III presents the main results obtained so far in describing non-linear effects in the elastic field of straight dislocations, as well as in the study of the core configuration of dislocations by using semidiscrete methods. Chapter IV is devoted to the linear and non-linear theory of continuous distri butions of dislocations and to its application to investigating the influence of dislo cations on crystal density and on the low-temperature thermal conductivity of crystals. Chapter V deals with the modelling of point defects as rigid or elastic inclusions l in an elastic matrix, or as force !nultipoles. Finally, some of the results Q)ailable on the interactions between point defects and other crystal defects are briefly reviewed. Although the material in the text covers mainly the mathematical theory of crystal defects, the author has been constantly concerned with emphasizing the phYSical significance of the results and some of their possible applications. The reader can easily enlarge his information in these directions by reference to the stan dard books on crystal defects by Cottrell {84J, Read {275J, Friedel [124J, Kroner [190J, van Bueren {365J, Indenbom {167J, Nabarro {258J, Hirth and Lathe [162J, or to the review articles by Seeger [286 J, Eshelby {Ill J, de Wit [385 J, and Bullough [50].
Download or read book Point Defects in Solids Semiconductors and molecular crystals written by James Homer Crawford and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Crystal Growth and Characterization written by Klaus-Werner Benz and published by John Wiley & Sons. This book was released on 2014-07-28 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides for the first time a comprehensive treatment of the basics of contemporary crystallography and crystal growth in a single volume. The reader will be familiarized with the concepts for the description of morphological and structural symmetry of crystals. The architecture of crystal structures of selected inorganic and molecular crystals is illustrated. The main crystallographic databases as data sources of crystal structures are described. Nucleation processes, their kinetics and main growth mechanism will be introduced in fundamentals of crystal growth. Some phase diagrams in the solid and liquid phases in correlation with the segregation of dopants are treated on a macro- and microscale. Fluid dynamic aspects with different types of convection in melts and solutions are discussed. Various growth techniques for semiconducting materials in connection with the use of external field (magnetic fields and microgravity) are described. Crystal characterization as the overall assessment of the grown crystal is treated in detail with respect to - crystal defects - crystal quality - field of application Introduction to Crystal Growth and Characterization is an ideal textbook written in a form readily accessible to undergraduate and graduate students of crystallography, physics, chemistry, materials science and engineering. It is also a valuable resource for all scientists concerned with crystal growth and materials engineering.
