Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Challenges and New Trends in Power Electronic Devices Reliability written by Elio Chiodo and published by Mdpi AG. This book was released on 2021-05-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase in new power electronic devices and converters for electric transportation and smart grid technologies requires a deep analysis of their component performances, considering all of the different environmental scenarios, overload conditions, and high stress operations. Therefore, evaluation of the reliability and availability of these devices becomes fundamental both from technical and economical points of view. The rapid evolution of technologies and the high reliability level offered by these components have shown that estimating reliability through the traditional approaches is difficult, as historical failure data and/or past observed scenarios demonstrate. With the aim to propose new approaches for the evaluation of reliability, in this book, eleven innovative contributions are collected, all focused on the reliability assessment of power electronic devices and related components.

Download or read book Polarization Effects in Semiconductors written by Debdeep Jena and published by Springer Science & Business Media. This book was released on 2008 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarization Effects in Semiconductors: From Ab Initio Theory to Device Applications presents the latest understanding of the solid state physics, electronic implications and practical applications of the unique spontaneous or pyro-electric polarization charge of wurtzite compound semiconductors, and associated piezo-electric effects in strained thin film heterostructures. These heterostructures are used in wide band gap semiconductor based sensors, in addition to various electronic and opto-electronic semiconductor devices. The book covers the ab initio theory of polarization in cubic and hexagonal semiconductors, growth of thin film GaN, GaN/AlGaN GaAlN/ AlGaInN, and other nitrides, and SiC heterostructures. It discusses the effects of spontaneous and piezoelectric polarization on band diagrams and electronic properties of abrupt and compositionally graded heterostructures, electronic characterization of polarization-induced charge distributions by scanning-probe spectroscopies, and gauge factors and strain effects. In addition, polarization in extended defects, piezo-electric strain/charge engineering, and application to device design and processing are covered. The effects of polarization on the fundamental electron transport properties, and on the basic optical transitions are described. The crucial role of polarization in devices such as high electron mobility transistors (HEMTs) and light-emitting diodes (LEDs) is covered. The chapters are authored by professors and researchers in the fields of physics, applied physics and electrical engineering, who worked for 5 years under the "Polarization Effects in Semiconductors" DOD funded Multi Disciplinary University Research Initiative. This book will be of interest to graduate students and researchers working in the field of wide-bandgap semiconductor physics and their device applications. It will also be useful for practicing engineers in the field of wide-bandgap semiconductor device research and development.

Download or read book Wide Bandgap Based Devices written by Farid Medjdoub and published by MDPI. This book was released on 2021-05-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices

Download or read book Gallium Nitride Power Devices written by Hongyu Yu and published by CRC Press. This book was released on 2017-07-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaN is considered the most promising material candidate in next-generation power device applications, owing to its unique material properties, for example, bandgap, high breakdown field, and high electron mobility. Therefore, GaN power device technologies are listed as the top priority to be developed in many countries, including the United States, the European Union, Japan, and China. This book presents a comprehensive overview of GaN power device technologies, for example, material growth, property analysis, device structure design, fabrication process, reliability, failure analysis, and packaging. It provides useful information to both students and researchers in academic and related industries working on GaN power devices. GaN wafer growth technology is from Enkris Semiconductor, currently one of the leading players in commercial GaN wafers. Chapters 3 and 7, on the GaN transistor fabrication process and GaN vertical power devices, are edited by Dr. Zhihong Liu, who has been working on GaN devices for more than ten years. Chapters 2 and 5, on the characteristics of polarization effects and the original demonstration of AlGaN/GaN heterojunction field-effect transistors, are written by researchers from Southwest Jiaotong University. Chapters 6, 8, and 9, on surface passivation, reliability, and package technologies, are edited by a group of researchers from the Southern University of Science and Technology of China.

Download or read book Piezotronics and Piezo Phototronics written by Zhong Lin Wang and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental principle of piezotronics and piezo-phototronics were introduced by Wang in 2007 and 2010, respectively. Due to the polarization of ions in a crystal that has non-central symmetry in materials, such as the wurtzite structured ZnO, GaN and InN, a piezoelectric potential (piezopotential) is created in the crystal by applying a stress. Owing to the simultaneous possession of piezoelectricity and semiconductor properties, the piezopotential created in the crystal has a strong effect on the carrier transport at the interface/junction. Piezotronics is for devices fabricated using the piezopotential as a “gate” voltage to control charge carrier transport at a contact or junction. The piezo-phototronic effect uses the piezopotential to control the carrier generation, transport, separation and/or recombination for improving the performance of optoelectronic devices, such as photon detector, solar cell and LED. The functionality offered by piezotroics and piezo-phototronics are complimentary to CMOS technology. There is an effective integration of piezotronic and piezo-phototronic devices with silicon based CMOS technology. Unique applications can be found in areas such as human-computer interfacing, sensing and actuating in nanorobotics, smart and personalized electronic signatures, smart MEMS/NEMS, nanorobotics and energy sciences. This book introduces the fundamentals of piezotronics and piezo-phototronics and advanced applications. It gives guidance to researchers, engineers and graduate students.

Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by MDPI. This book was released on 2019-08-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.

Download or read book Photonics Applications in Astronomy Communications Industry and High energy Physics Experiments written by Ryszard S. Romaniuk and published by SPIE-International Society for Optical Engineering. This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides

Download or read book Social Transformation Digital Way written by Jyotsna Kumar Mandal and published by Springer. This book was released on 2018-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 52nd Annual Convention of the Computer Society of India, CSI 2017, held in Kolkata, India, in January 2018. The 59 revised papers presented were carefully reviewed and selected from 157 submissions. The theme of CSI 2017, Social Transformation – Digital Way, was selected to highlight the importance of technology for both central and state governments at their respective levels to achieve doorstep connectivity with its citizens. The papers are organized in the following topical sections: Signal processing, microwave and communication engineering; circuits and systems; data science and data analytics; bio computing; social computing; mobile, nano, quantum computing; data mining; security and forensics; digital image processing; and computational intelligence.

Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book Nano Electronic Devices written by Dragica Vasileska and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the advanced simulation methods needed for proper modeling of state-of-the-art nanoscale devices. It systematically describes theoretical approaches and the numerical solutions that are used in explaining the operation of both power devices as well as nano-scale devices. It clearly explains for what types of devices a particular method is suitable, which is the most critical point that a researcher faces and has to decide upon when modeling semiconductor devices.

Download or read book Electronic Components and Systems written by W. H. Dennis and published by Elsevier. This book was released on 2013-10-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to know the fundamental concepts, theories, and processes in the related fields.