Download or read book Control of Discrete Event Systems written by Carla Seatzu and published by Springer. This book was released on 2012-07-27 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Discrete-event Systems provides a survey of the most important topics in the discrete-event systems theory with particular focus on finite-state automata, Petri nets and max-plus algebra. Coverage ranges from introductory material on the basic notions and definitions of discrete-event systems to more recent results. Special attention is given to results on supervisory control, state estimation and fault diagnosis of both centralized and distributed/decentralized systems developed in the framework of the Distributed Supervisory Control of Large Plants (DISC) project. Later parts of the text are devoted to the study of congested systems though fluidization, an over approximation allowing a much more efficient study of observation and control problems of timed Petri nets. Finally, the max-plus algebraic approach to the analysis and control of choice-free systems is also considered. Control of Discrete-event Systems provides an introduction to discrete-event systems for readers that are not familiar with this class of systems, but also provides an introduction to research problems and open issues of current interest to readers already familiar with them. Most of the material in this book has been presented during a Ph.D. school held in Cagliari, Italy, in June 2011.
Download or read book Synthesis and Control of Discrete Event Systems written by Benoît Caillaud and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at providing a view of the current trends in the development of research on Synthesis and Control of Discrete Event Systems. Papers col lected in this volume are based on a selection of talks given in June and July 2001 at two independent meetings: the Workshop on Synthesis of Concurrent Systems, held in Newcastle upon Tyne as a satellite event of ICATPN/ICACSD and organized by Ph. Darondeau and L. Lavagno, and the Symposium on the Supervisory Control of Discrete Event Systems (SCODES), held in Paris as a satellite event of CAV and organized by B. Caillaud and X. Xie. Synthesis is a generic term that covers all procedures aiming to construct from specifications given as input objects matching these specifications. The ories and applications of synthesis have been studied and developped for long in connection with logics, programming, automata, discrete event systems, and hardware circuits. Logics and programming are outside the scope of this book, whose focus is on Discrete Event Systems and Supervisory Control. The stress today in this field is on a better applicability of theories and algorithms to prac tical systems design. Coping with decentralization or distribution and caring for an efficient realization of the synthesized systems or controllers are of the utmost importance in areas so diverse as the supervision of embedded or man ufacturing systems, or the implementation of protocols in software or in hard ware.
Download or read book Discrete Event Systems Modeling and Control written by S. Balemi and published by Birkhäuser. This book was released on 2012-12-06 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research of discrete event systems is strongly motivated by applications in flex ible manufacturing, in traffic control and in concurrent and real-time software verification and design, just to mention a few important areas. Discrete event system theory is a promising and dynamically developing area of both control theory and computer science. Discrete event systems are systems with non-numerically-valued states, inputs, and outputs. The approaches to the modelling and control of these systems can be roughly divided into two groups. The first group is concerned with the automatic design of controllers from formal specifications of logical requirements. This re search owes much to the pioneering work of P.J. Ramadge and W.M. Wonham at the beginning of the eighties. The second group deals with the analysis and op timization of system throughput, waiting time, and other performance measures for discrete event systems. The present book contains selected papers presented at the Joint Workshop on Discrete Event Systems (WODES'92) held in Prague, Czechoslovakia, on Au gust 26-28, 1992 and organized by the Institute of Information Theory and Au tomation of the Czechoslovak Academy of Sciences, Prague, Czechoslovakia, by the Automatic Control Laboratory of the Swiss Federal Institute of Technology (ETH) , Zurich, Switzerland, and by the Department of Computing Science of the University of Groningen, Groningen, the Netherlands.
Download or read book Supervisory Control of Discrete Event Systems written by W. Murray Wonham and published by Springer. This book was released on 2018-08-17 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how supervisory control theory (SCT) supports the formulation of various control problems of standard types, like the synthesis of controlled dynamic invariants by state feedback, and the resolution of such problems in terms of naturally definable control-theoretic concepts and properties, like reachability, controllability and observability. It exploits a simple, abstract model of controlled discrete-event systems (DES) that has proved to be tractable, appealing to control specialists, and expressive of a range of control-theoretic ideas. It allows readers to choose between automaton-based and dually language-based forms of SCT, depending on whether their preference is for an internal-structural or external-behavioral description of the problem. The monograph begins with two chapters on algebraic and linguistic preliminaries and the fundamental concepts and results of SCT are introduced. To handle complexity caused by system scale, architectural approaches—the horizontal modularity of decentralized and distributed supervision and the vertical modularity of hierarchical supervision—are introduced. Supervisory control under partial observation and state-based supervisory control are also addressed; in the latter, a vector DES model that exploits internal regularity of algebraic structure is proposed. Finally SCT is generalized to deal with timed DES by incorporating temporal features in addition to logical ones. Researchers and graduate students working with the control of discrete-event systems or who are interested in the development of supervisory control methods will find this book an invaluable aid in their studies. The text will also be of assistance to researchers in manufacturing, logistics, communications and transportation, areas which provide plentiful examples of the class of systems being discussed.
Download or read book Supervisor Localization written by Kai Cai and published by Springer. This book was released on 2015-06-23 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a systematic top-down approach to distributed control synthesis of discrete-event systems (DES). The approach is called supervisor localization; its essence is the allocation of external supervisory control action to individual component agents as their internal control strategies. The procedure is: first synthesize a monolithic supervisor, to achieve globally optimal and nonblocking controlled behavior, then decompose the monolithic supervisor into local controllers, one for each agent. The collective behavior of the resulting local controllers is identical to that achieved by the monolithic supervisor. The basic localization theory is first presented in the Ramadge–Wonham language-based supervisory control framework, then demonstrated with distributed control examples of multi-robot formations, manufacturing systems, and distributed algorithms. An architectural approach is adopted to apply localization to large-scale DES; this yields a heterarchical localization procedure, which is also demonstrated with benchmark examples. Moreover, a state-based framework, state-tree structures, is exploited for efficient computation of localization. Finally localization is extended to timed DES, which addresses distributed control synthesis with temporal specifications. The authors’ TCT software and sourcecode will help the reader to reproduce the results demonstrated in the examples. Academic researchers and graduate students interested in discrete-event and distributed systems and control will find this book an instructive resource. It will also be useful for researchers in manufacturing, supply-chain and logistics and practitioners in related industries.
Download or read book Control Systems Design 2003 CSD 03 written by Stefan Kozak and published by Elsevier. This book was released on 2004-04 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material presented in this volume represents current ideas, knowledge, experience and research results in various fields of control system design.
Download or read book Tools and Algorithms for the Construction and Analysis of Systems written by Dirk Beyer and published by Springer. This book was released on 2018-04-11 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is Open Access under a CC BY licence. The LNCS 10805 and 10806 proceedings set constitutes the proceedings of the 24th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2018, which took place in Thessaloniki, Greece, in April 2018, held as part of the European Joint Conference on Theory and Practice of Software, ETAPS 2018. The total of 43 full and 11 short papers presented in these volumes was carefully reviewed and selected from 154submissions. The papers are organized in topical sections as follows: Part I: theorem proving; SAT and SMT I; deductive verification; software verification and optimization; model checking; and machine learning. Part II: concurrent and distributed systems; SAT and SMT II; security and reactive systems; static and dynamic program analysis; hybrid and stochastic systems; temporal logic and mu-calculus; 7th Competition on Software Verification – SV-COMP.
Download or read book Computer Aided Verification written by Ganesh Gopalakrishnan and published by Springer Science & Business Media. This book was released on 2011-07-05 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 23rd International Conference on Computer Aided Verification, CAV 2011, held in Snowbird, UT, USA, in July 2011. The 35 revised full papers presented together with 20 tool papers were carefully reviewed and selected from 161 submissions. The papers are organized in topical sections on the following workshops: 4th International Workshop on Numerical Software Verification (NSV 2011), 10th International Workshop on Parallel and Distributed Methods in Verifications (PDMC 2011), 4th International Workshop on Exploiting Concurrency Efficiently and Correctly (EC2 2011), Frontiers in Analog Circuit Synthesis and Verification (FAC 2011), International Workshop on Satisfiability Modulo Theories, including SMTCOMP (SMT 2011), 18th International SPIN Workshop on Model Checking of Software (SPIN 2011), Formal Methods for Robotics and Automation (FM-R 2011), and Practical Synthesis for Concurrent Systems (PSY 2011).
Download or read book Modeling Analysis and Control of Centralized and Decentralized Logical Discrete event Systems written by George Russell Barrett and published by . This book was released on 1999 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Models and Analysis for Distributed Systems written by Serge Haddad and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, distributed systems are increasingly present, for public software applications as well as critical systems. software applications as well as critical systems. This title and Distributed Systems: Design and Algorithms – from the same editors – introduce the underlying concepts, the associated design techniques and the related security issues. The objective of this book is to describe the state of the art of the formal methods for the analysis of distributed systems. Numerous issues remain open and are the topics of major research projects. One current research trend consists of profoundly mixing the design, modeling, verification and implementation stages. This prototyping-based approach is centered around the concept of model refinement. This book is more specifically intended for readers that wish to gain an overview of the application of formal methods in the design of distributed systems. Master’s and PhD students, as well as engineers in industry, will find a global understanding of the techniques as well as references to the most up-to-date works in this area.
Download or read book Automated Technology for Verification and Analysis written by Ahmed Bouajjani and published by Springer. This book was released on 2010-09-21 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation. This book constitutes the refereed proceedings of the 8th International Symposium on Automated Technology for Verification and Analysis, ATVA 2010, held in Singapore, in September 2010. The book includes 3 invited talks, 21 regular papers and 9 tool papers.
Download or read book Theoretical Aspects of Computing ICTAC 2004 written by Zhiming Liu and published by Springer Science & Business Media. This book was released on 2005-03-08 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed postproceedings of the First International Colloquium on Theoretical Aspects of Computing, ICTAC 2004. The 34 revised full papers presented together with 4 invited contributions were carefully selected from 111 submissions during two rounds of reviewing and improvement. The papers are organized in topical sections on concurrent and distributed systems, model integration and theory unification, program reasoning and testing, verification, theories of programming and programming languages, real-time and co-design, and automata theory and logics.
Download or read book Automated Technology for Verification and Analysis written by Tevfik Bultan and published by Springer. This book was released on 2011-10-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th International Symposium on Automated Technology for Verification and Analysis, ATVA 2011, held in Taipei, Taiwan, in October 2011. The 23 revised regular papers presented together with 5 invited papers, 11 short papers, and 2 tool papers, were carefully reviewed and selected from 75 submissions. The papers address all theoretical and practical aspects of automated analysis, verification and synthesis; thus providing a forum for interaction between the regional and the international research communities and industry in the field.
Download or read book Integrated Formal Methods written by Einar Broch Johnsen and published by Springer. This book was released on 2013-05-13 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Integrated Formal Methods, IFM 2013, held in Turku, Finland, in June 2013. The 25 revised full papers presented together with 4 invited papers were carefully reviewed and selected from 84 full paper submissions. The papers cover the spectrum of integrated formal methods, focusing on refinement, integration, translation, verification, reachability and model checking, usability and testing, distributed systems, semantics, and system-level analysis.
Download or read book Advances in Control Theory and Applications written by Claudio Bonivento and published by Springer. This book was released on 2007-06-04 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the outcome of the first CASY workshop on "Advances in Control Theory and Applications" which was held at University of Bologna on May 22-26, 2006. It consists of selected contributions by some of the invited speakers and contains recent results in control. The volume is intended for engineers, researchers, and students in control engineering.
Download or read book CONCUR 98 Concurrency Theory written by Davide Sangiorgi and published by Springer Science & Business Media. This book was released on 1998-08-19 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th International Conference on Concurrency Theory, CONCUR'98, held in Nice, France, in September 1998. The 35 revised full papers presented were carefully selected from a total of 104 submissions. Also presented are five invited contributions. Among the topics covered are moduls of computation and semantic domains, process algebras, Petri Nets, event structures, real-time systems, hybrid systems, model checking, verification techniques, refinement, rewriting, typing systems and algorithms, etc..
Download or read book Introduction to Discrete Event Systems written by Christos G. Cassandras and published by Springer Nature. This book was released on 2021-11-11 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique textbook comprehensively introduces the field of discrete event systems, offering a breadth of coverage that makes the material accessible to readers of varied backgrounds. The book emphasizes a unified modeling framework that transcends specific application areas, linking the following topics in a coherent manner: language and automata theory, supervisory control, Petri net theory, Markov chains and queueing theory, discrete-event simulation, and concurrent estimation techniques. Topics and features: detailed treatment of automata and language theory in the context of discrete event systems, including application to state estimation and diagnosis comprehensive coverage of centralized and decentralized supervisory control of partially-observed systems timed models, including timed automata and hybrid automata stochastic models for discrete event systems and controlled Markov chains discrete event simulation an introduction to stochastic hybrid systems sensitivity analysis and optimization of discrete event and hybrid systems new in the third edition: opacity properties, enhanced coverage of supervisory control, overview of latest software tools This proven textbook is essential to advanced-level students and researchers in a variety of disciplines where the study of discrete event systems is relevant: control, communications, computer engineering, computer science, manufacturing engineering, transportation networks, operations research, and industrial engineering. Christos G. Cassandras is Distinguished Professor of Engineering, Professor of Systems Engineering, and Professor of Electrical and Computer Engineering at Boston University. Stéphane Lafortune is Professor of Electrical Engineering and Computer Science at the University of Michigan, Ann Arbor.
