Download or read book DC Magnetron Sputtered Pure and Al Doped Cu2O Thin Films written by Sivasankar Reddy Akepati and published by LAP Lambert Academic Publishing. This book was released on 2015-11-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting metal oxide thin films received the attention of many researchers for application in transparent electronics such as heterojunction solar cells, gas sensors, electrochromic devices, optoelectronic devices etc. Cuprous oxide (Cu2O) and copper aluminum oxide (CuAlO2) are transparent oxides exhibiting p-type conductivity. The properties of these materials in thin film mainly depend on the method of preparation and deposition conditions maintained during film growth. This book restrains the optimized deposition conditions of Cu2O and CuAlO2 films deposited on glass substrates using dc reactive magnetron sputtering technique, and investigated their structural, composition, microstructure, surface morphology, optical and electrical properties.The promising approach to prepare device quality films for optoelectronic devices was discussed clearly in this book

Download or read book Transparent Conducting Pure and Tin Doped Indium Oxide Films Preparation and Characterization written by Dr. B. Radhakrishna and published by Lulu.com. This book was released on 2019-03-26 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Badeker in 1907 observed that some materials are optically transparent in the visible light and electrically conducting [1]. Because of the increasing interest in electrically and electronically active materials, the search for materials and the techniques for producing semi-transparent electrically conducting films have gained much importance. In an intrinsic stoichiometric material, it is not possible to have simultaneously high transparency (>80%%) in the visible region and high electrical conductivity (>103 Ω cm-1). A variety of metals in thin film form (

Download or read book Characterization of the Electrical Properties of DC Magnetron Sputtered CR SI C Thin Films written by Marshall Devin Wilson and published by . This book was released on 1995 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Ceramics for Photocatalytic Membranes written by Mohd Hafiz Dzarfan Othman and published by Elsevier. This book was released on 2024-05-18 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane filtration is becoming the technology of choice in liquid separations around the world for applications including desalination, pretreatment, removal of suspended solids from water and wastewater, for membrane bioreactors as well as food and beverage processing. Advanced Ceramics for Photocatalytic Membranes: Synthesis, Characterization and Applications in Water and Wastewater Treatment reviews recent research on the application and use of advanced ceramic materials in photocatalytic membrane processes. Divided over five main sections, the first section discusses current developments in photocatalytic membrane processes. The second and third sections focus on synthesis and fabrication techniques using either physical or chemical approaches. The remaining sections cover diverse characterization methods and performance evaluations, followed by various types of environmental applications. The book is not only limited to the conceptual theory, but it also gives a detailed review of recent progress in materials science. It presents applications in different disciplines, i.e., chemistry, physics, and mechanics, that are critically required in modern science and engineering. The book presents an across-the-board briefing of the field, which will be suitable for use as a major reference, as well as a knowledge sharing tool. Designed for both experts and newcomers alike, the book provides a comprehensive overview of the most recent advances in the field on the application and use of advanced ceramic materials in photocatalytic membrane processes. - Provides a comprehensive review of advanced ceramic materials used in photocatalytic membranes - Covers synthesis of ceramic membranes via both physical and chemical approaches - Discusses materials characterization, properties, and performance analysis - Covers modeling, simulation, and the theory of mass transfer mechanisms - Features applications in water and wastewater treatment - Discusses system scale up, economic viability, and cost analysis

Download or read book Effect of DC Magnetron Sputtering on Aluminium Nitride AIN Thin Films written by Mohd Adreen Shah Azman Shah and published by . This book was released on 2014 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microstructural Comparisons of Ultra Thin Cu Films Deposited by Ion Beam and Dc Magnetron Sputtering written by W. Prater and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We report and contrast both the electrical resistance and the microstructure of copper thin films deposited in an oxygen containing atmosphere by ion-beam and dc-magnetron sputtering. For films with thicknesses 5 nm or less, the resistivity of the Cu films is minimized at oxygen concentrations ranging from 0.2% to 1% for dc-magnetron sputtering and 6% to 10% for ion beam sputtering. Films sputtered under both conditions show a similar decrease of interface roughness with increasing oxygen concentration, although the magnetron deposited films are smoother. The dc-magnetron produced films have higher resistivity, have smaller Cu grains, and contain a higher concentration of cuprous oxide particles. We discuss the mechanisms leading to the grain refinement and the consequent reduced resistivity in both types of films.

Download or read book DC Magnetron Sputtering of Y Ba Cu O Thin Films written by Gunnar Larsson and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Properties of Vanadium Dioxide Thin Films Prepared by DC Magnetron Sputtering written by Kaushik Chhotani and published by . This book was released on 1991 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication and Characterization of VO2 Thin Films Using Pulsed DC Magnetron Sputtering written by Juan Antonio Santiago Santos and published by . This book was released on 2015 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Growth of Bi Sr Ca Cu O Superconducting Thin Films on Al O Substrates Via Dc magnetron Plasma Sputtering from Single Compound Target written by I-Jen Wang and published by . This book was released on 1994 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Visible Light Active Photocatalysis written by Srabanti Ghosh and published by John Wiley & Sons. This book was released on 2018-06-11 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and timely overview of this important and hot topic, with special emphasis placed on environmental applications and the potential for solar light harvesting. Following introductory chapters on environmental photocatalysis, water splitting, and applications in synthetic chemistry, further chapters focus on the synthesis and design of photocatalysts, solar energy conversion, and such environmental aspects as the removal of water pollutants, photocatalytic conversion of CO2. Besides metal oxide-based photocatalysts, the authors cover other relevant material classes including carbon-based nanomaterials and novel hybrid materials. Chapters on mechanistic aspects, computational modeling of photocatalysis and Challenges and perspectives of solar reactor design for industrial applications complete this unique survey of the subject. With its in-depth discussions ranging from a comprehensive understanding to the engineering of materials and applied devices, this is an invaluable resource for a range of disciplines.

Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.

Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy

Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals and Applications of Chemical Sensors written by Dennis Schuetzle and published by . This book was released on 1986 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the first comprehensive collection of articles on the fundamentals and applications of a wide variety of chemical sensors. Discusses a range of topics from the development of new sensor concepts to improvement in sensors that have been mass produced for several years. Specific types of sensors discussed include oxygen, electrochemical, microbial, drug, and glucose sensors.

Download or read book Handbook of Sputter Deposition Technology written by Kiyotaka Wasa and published by William Andrew. This book was released on 2012-12-31 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated new edition includes an entirely new team of contributing authors with backgrounds specializing in the various new applications of sputtering technology. It forms a bridge between fundamental theory and practical application, giving an insight into innovative new materials, devices and systems. Organized into three parts for ease of use, this Handbook introduces the fundamentals of thin films and sputtering deposition, explores the theory and practices of this field, and also covers new technology such as nano-functional materials and MEMS. Wide varieties of functional thin film materials and processing are described, and experimental data is provided with detailed examples and theoretical descriptions. - A strong applications focus, covering current and emerging technologies, including nano-materials and MEMS (microelectrolmechanical systems) for energy, environments, communications, and/or bio-medical field. New chapters on computer simulation of sputtering and MEMS completes the update and insures that the new edition includes the most current and forward-looking coverage available - All applications discussed are supported by theoretical discussions, offering readers both the "how" and the "why" of each technique - 40% revision: the new edition includes an entirely new team of contributing authors with backgrounds specializing in the various new applications that are covered in the book and providing the most up-to-date coverage available anywhere

Download or read book Introduction to Thin Film Transistors written by S.D. Brotherton and published by Springer Science & Business Media. This book was released on 2013-04-16 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thin Film Transistors reviews the operation, application and technology of the main classes of thin film transistor (TFT) of current interest for large area electronics. The TFT materials covered include hydrogenated amorphous silicon (a-Si:H), poly-crystalline silicon (poly-Si), transparent amorphous oxide semiconductors (AOS), and organic semiconductors. The large scale manufacturing of a-Si:H TFTs forms the basis of the active matrix flat panel display industry. Poly-Si TFTs facilitate the integration of electronic circuits into portable active matrix liquid crystal displays, and are increasingly used in active matrix organic light emitting diode (AMOLED) displays for smart phones. The recently developed AOS TFTs are seen as an alternative option to poly-Si and a-Si:H for AMOLED TV and large AMLCD TV applications, respectively. The organic TFTs are regarded as a cost effective route into flexible electronics. As well as treating the highly divergent preparation and properties of these materials, the physics of the devices fabricated from them is also covered, with emphasis on performance features such as carrier mobility limitations, leakage currents and instability mechanisms. The thin film transistors implemented with these materials are the conventional, insulated gate field effect transistors, and a further chapter describes a new thin film transistor structure: the source gated transistor, SGT. The driving force behind much of the development of TFTs has been their application to AMLCDs, and there is a chapter dealing with the operation of these displays, as well as of AMOLED and electrophoretic displays. A discussion of TFT and pixel layout issues is also included. For students and new-comers to the field, introductory chapters deal with basic semiconductor surface physics, and with classical MOSFET operation. These topics are handled analytically, so that the underlying device physics is clearly revealed. These treatments are then used as a reference point, from which the impact of additional band-gap states on TFT behaviour can be readily appreciated. This reference book, covering all the major TFT technologies, will be of interest to a wide range of scientists and engineers in the large area electronics industry. It will also be a broad introduction for research students and other scientists entering the field, as well as providing an accessible and comprehensive overview for undergraduate and postgraduate teaching programmes.