Download or read book Dc Machines And Transformers 2Ed written by K Murugesh Kumar and published by Vikas Publishing House. This book was released on 2004-12-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, lucid and student-friendly in the true sense, DC Machines and Transformers adopts a self-study approach and is aimed at demystifying the subject for students who consider ?Electric Machines? too tough. This second edition has been thoroughly revised and includes a summary at the end of each chapter, many short and long answer questions taken from question papers of various universities? over the last 25 years.
Download or read book DC Machines and Transformers For GTU written by K R, Sidhdhapura & D B, Raval and published by Vikas Publishing House. This book was released on with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for the students of third semester of electrical engineering of Gujarat Technological University (GTU). It would also be useful for the students of third semester of power electronics branch. The book provides comprehensive knowledge of the DC machines and transformers and has an extended summary in the form of Key points to remember, and a large number of solved and unsolved problems. In the exercise, the questions have been presented in accordance with the GTU examination pattern. Key Features Strictly as per the GTU syllabus Over 125 descriptive questions Examinations oriented approach Includes questions of the last five years of GTU examinations
Download or read book DC Machines and Transformers written by K. Murugesh Kumar and published by . This book was released on 2000-01-01 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dc Machines And Transformers 2Ed written by K Murugesh Kumar and published by Vikas Publishing House. This book was released on 2004-12-01 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, lucid and student-friendly in the true sense, DC Machines and Transformers adopts a self-study approach and is aimed at demystifying the subject for students who consider ?Electric Machines? too tough. This second edition has been thoroughly revised and includes a summary at the end of each chapter, many short and long answer questions taken from question papers of various universities? over the last 25 years.
Download or read book Electric Machinery and Transformers written by Bhag S. Guru and published by Oxford University Press, USA. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For this revision of their bestselling junior- and senior-level text, Guru & Hiziroglu have incorporated eleven years of cutting-edge developments in the field since Electric Machinery & Transformers was first published. Completely re-written, the new Second Edition also incorporates suggestions from students and instructors who have used the First Edition, making it the best text available for junior- and senior-level courses in electric machines. The new edition features a wealth of new and improved problems and examples, designed to complement the authors' overall goal of encouraging intuitive reasoning rather than rote memorization of material. Chapter 3, which presents the conversion of energy, now includes: analysis of magnetically coupled coils, induced emf in a coil rotating in a uniform magnetic field, induced emf in a coil rotating in a time-varying magnetic field, and the concept of the revolving field. All problems and examples have been rigorously tested using Mathcad.
Download or read book Electrical Machines I DC Machines and Transformers written by AP Experts and published by Aarushi Publications. This book was released on with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Electro-Mechanical Energy Conversion
Download or read book Electrical Machines written by S. K. Sahdev and published by Cambridge University Press. This book was released on 2017-11-24 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers key concepts of electrical machines embedded with solved examples, review questions, illustrations and open book questions.
Download or read book An Introduction to Electrical Machines and Transformers written by George McPherson and published by John Wiley & Sons. This book was released on 1990 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical engineering students are traditionally given but brief exposure to the important topic of electrical machines and transformers. This text/reference comprises a thorough and accessible introduction to the subject and this Second Edition contains more material on small machinery and a new chapter on the ``energy conversion'' approach to calculation of magnetically developed forces. A circuit model is developed for each of the basic devices and the physical basis of each model is explained. Chapters are relatively independent of one another and follow the same general plan--coverage is broad and deep enough to permit flexibility in course design.
Download or read book ELECTRICAL MACHINES written by M. N. BANDO and published by PHI Learning Pvt. Ltd.. This book was released on 2007-09-27 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, up-to-date introduction to Electrical Machines is designed to meet the needs of undergraduate electrical engineering students. It presents the essential principles of rotating machines and transformers. The emphasis is on the performance, though the book also introduces the salient features of electrical machine design. The book provides accessible, student-friendly coverage of dc machines, transformers, three-phase induction motor, single-phase induction motor, fractional horsepower motors, and synchronous machines. The clear writing style of the book enhanced by illustrative figures and simplified explanations of the fundamentals, makes it an ideal text for gaining a thorough understanding of the subject of electrical machines. Key Features Include: •Detailed coverage of the construction of electrical machines. •Lucid explanations of the principles of operation of electrical machines. •Methods of testing of electrical machines. •Performance calculations of electrical machines. •Wealth of diverse solved examples in each chapter to illustrate the application of theory to practical problems. •Salient features of design of electrical machines. •Objective type questions to help students prepare for competitive exams.
Download or read book Electrical Transformers and Rotating Machines written by Stephen L. Herman and published by Cengage Learning. This book was released on 2016-01-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for future electricians, ELECTRICAL TRANSFORMERS AND ROTATING MACHINES, 4e delivers comprehensive coverage reflecting real-world practice. It includes expansive coverage of magnetic measurements, exponential curves, control transformers, transformer nameplates, transformer sizing calculations, transformer installation, three-phase variable autotransformers, and more. The Fourth Edition is also completely up to date with changes from the NEC 2014 code. In addition, hands-on experiments are integrated throughout. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Electrical Machines and Drives written by Jan A. Melkebeek and published by Springer. This book was released on 2018-01-20 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor’s and Master’s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course ’Fundamentals of Electric Drives’ in the third bachelor. Part 3 is used for the course ’Controlled Electrical Drives’ in the first master, while Part 4 is used in the specialised master on electrical energy.
Download or read book Basic Electrical Engineering written by K. N. Srinivas and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide a consolidated text for the first year B.E. Computer Science and Engineering students and B.Tech Information Technology students of Anna University. The syllabus has been thoroughly revised for the non-semester yearly pattern by the University. The book, made up of five chapters, systematically covers the five units of the syllabus. It begins with a detailed discussion on the fundamentals of electric circuits. DC circuits, AC circuits, 3-phase circuits, resonance and the network theorems. Lecture-type presentation of the rudiments of the fundamentals in conjunction with hundreds of solved examples is the strength of this book. Magnetic circuits and various magnetic elements and their properties, with number of illustrations are presented. DC machines and transformers are further dealt with. Equivalent circuits of machines supported with the respective photographs will ease the reader to understand the concepts of machines much better. Synchronous machines and asynchronous machines and fundamentals of control systems with various practical examples and relevant worked illustrations conclude this book. A large number of numerical illustrations and diagrammatic representations make this book valuable for students and teachers.
Download or read book Electrical Machines and Transformers written by Peter F. Ryff and published by Prentice Hall. This book was released on 1987 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Testing of Electrical Machines written by M. V. Deshpande and published by PHI Learning Pvt. Ltd.. This book was released on 2009-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic theory, principle of operation and characteristics of transformers, three-phase induction motors, single-phase induction motors, synchronous machines and dc machines are dealt with in Appendices to provide the background for the design of these machines. The initial chapters of the book are devoted to basic parameters of design of electrical apparatus, characteristics of magnetic, electric and insulating materials, construction of electrical machines, and basic design requirements of magnetic and electrical circuits of machines. Detailed procedures for designing transformers, three-phase induction motors, single-phase induction motors, synchronous machines and dc machines are explained in a simple and logical way. Several sample designs have been wroked out in detail. Methods of carrying out various tests and maintaining test records are discussed in detail. The use of computers in designing electrical machines has been illustrated. An exclusive chapter on special machines explains the basic theory and applications of stepper motors, rotating phase converters, pole amplitude modulated (PAM) motors, reluctance motors and energy efficient motors. This book is intended for degree and diploma students of electrical engineering and professional examinations of the Institution of Engineers (India). It will be useful for electrical engineers in industry engaged in design, manufacture and testing of electrical machines.
Download or read book Principles of Electrical Machines written by VK Mehta | Rohit Mehta and published by S. Chand Publishing. This book was released on 2008 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over 15 years "Principles of Electrical Machines is an ideal text for students who look to gain a current and clear understanding of the subject as all theories and concepts are explained with lucidity and clarity. Succinctly divided in 14 chapters, the book delves into important concepts of the subject which include Armature Reaction and Commutation, Single-phase Motors, Three-phase Induction motors, Synchronous Motors, Transformers and Alternators with the help of numerous figures and supporting chapter-end questions for retention.
Download or read book Transformers and Generators written by Uday A. Bakshi and published by Technical Publications. This book was released on 2020-11-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of transformers and generators is well known in the various engineering fields. The book provides comprehensive coverage of the various types of transformers, d.c. generators and synchronous generators (alternators). The book starts with the brief review of single phase transformer. It continues to discuss no load and on load performance of transformers, phasor diagrams, equivalent circuit, voltage regulation and all day efficiency of transformer. The detailed discussion of open and short circuit tests and predetermination of regulation and efficiency is also included in the book. The chapter on three phase transformer provides the detailed discussion of construction, three phase transformer connections and phasor groups. The book also explains parallel operation of transformers, tap changing transformer, autotransformers, cooling of transformers and three winding transformer. The various testing methods of transformers are also incorporated in the book. The book covers all the details of d.c. generators including construction, armature reaction, commutation, characteristics and applications. The chapters on synchronous generators starts with the explanation of basics of synchronous generators including construction, winding details, e.m.f. equation and effect of harmonics on induced e.m.f. The book then explains the concept of armature reaction, phasor diagrams, regulation and various methods of finding the regulation of alternator. Stepwise explanation and simple techniques used to elaborate these methods is the feature of this book. The book further explains the concept of synchronization of alternators, two reaction theory and parallel operation of alternators. The book uses plain, lucid language to explain each topic. The book provides the logical method of explaining the various complicated topics and stepwise methods to make the understanding easy. Each chapter is well supported with necessary illustrations, self explanatory diagrams and variety of solved problems. The book explains the philosophy of the subject which makes the understanding of the concepts very clear and makes the subject more interesting.
Download or read book Electrical Machines written by S. K. Bhattacharya and published by . This book was released on 1985 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
