Download or read book Handbook of Nucleating Agents written by George Wypych and published by Elsevier. This book was released on 2021-01-25 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nucleating Agents, Second Edition gives engineers and materials scientists the information they need to increase the production rate, modify structure and morphology, improve mechanical performance, and reduce the haze of polymeric products through proper selection of nucleating agents (and/or the so-called clarifying agents). The book analyzes the existing literature paying special attention to recent developments, and is divided into 14 chapters, each of which concentrates on essential performances of nucleating agents. Chemical origin and related properties of nucleating agents are analyzed in general terms to highlight the differences in their properties and the book also provides the most essential theoretical knowledge required for proper selection and use of nucleating and clarifying agents. This includes polymer crystallization with and without nucleating agents, parameters of crystallization, essential influences on the nucleation processes, the measures of nucleation efficiency, the mechanisms of nucleation, and the effective methods of dispersion of nucleating agents. Later chapters concentrate on the application aspects in different formulations, outlining nineteen polymer processing methods which require use of nucleating agents, forty different polymers which are known to use nucleating agents, and sixteen applied examples of commercial products with nucleating agents. The final three chapters discuss the effects of nucleating agents on physical and mechanical properties of materials, the most essential analytical techniques, and health and safety in use of nucleating agents. Enables engineers to use nucleating agents more effectively to increase production rate, modify structure and morphology, and reduce haze of polymer products Provides a theoretical grounding required for proper selection and use of nucleating and clarifying agents Offers an extensive review of current applications of nucleating agents in different formulations Includes analysis of the chemical origin and related properties of nucleating agents to highlight differences in their properties

Download or read book Databook of Nucleating Agents written by George Wypych and published by Elsevier. This book was released on 2021-01-20 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Nucleating Agents, Second Edition gives engineers and materials scientists the information they need to increase the production rate, modify structure and morphology, and reduce the haze of polymeric products through proper selection of nucleating and clarifying agents. Chemical origin and related properties of nucleating agents are analyzed in general terms to highlight the differences in their properties, including the essential theoretical knowledge required for correct selection and use of nucleating and clarifying agents. This includes methods of chemical modification of nucleating agents and their deposition on suitable substrates, methods and results of dispersion of nucleating agents, influence of their concentration and cooling rate on final result and rate of crystallization, nucleation efficiency of different products and the reasons behind it, and generally accepted mechanisms of nucleation. The book also covers application aspects in different formulations. Patent literature and research papers are extensively reviewed for different applications, and polymer processing methods which require the use of nucleating agents are discussed, with an emphasis on the intricacies of using nucleating agents in different polymers and products. - Provides key information for increasing production rates, modifying structures and morphologies, and reducing haze in polymeric products - Analyzes chemical origin and related properties of widely-used nucleating agents - Includes essential theoretical knowledge required for correct selection and use of nucleating and clarifying agents - Outlines methods of chemical modification of nucleating agents and their deposition on suitable substrates

Download or read book Handbook of Foaming and Blowing Agents written by George Wypych and published by Elsevier. This book was released on 2022-03-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Foaming and Blowing Agents, Second Edition includes the most current information on foaming technology, guiding users on the proper selection of formulation, which is highly dependent on the mechanisms of action of blowing agents and foaming agents, as well as dispersion and solubility. The book includes properties of 23 groups of blowing agents and the typical range of technical performance for each group, including general properties, physical-chemical properties, health and safety, environmental impact, and applications in different products and polymers. All information is illustrated by chemical reactions and diagrams. Chapters in the book look at foaming mechanisms with the use of solid blowing agents, which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gases and evaporating liquids. - Introduces the fundamental mechanisms of action of blowing agents and foaming - Includes best practice guidance to help engineers and technicians improve the efficiency of their existing foaming processes - Enables practitioners to select blowing agents and foaming methods more effectively, thus reducing the risk of poor specification - Introduces useful analytical techniques for foaming - Discusses the environmental impact of foaming processes

Download or read book Food Additives Data Book written by Jim Smith and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of additives in food is a dynamic one, as consumers demand fewer additives in foods and as governments review the list of additives approved and their permitted levels. Scientists also refine the knowledge of the risk assessment process as well as improve analytical methods and the use of alternative additives, processes or ingredients. Since the first edition of the Food Additives Databook was published, there have been numerous changes due to these developments and some additives are no longer permitted, some have new permitted levels of use and new additives have been assessed and approved. The revised second edition of this major reference work covers all the "must-have" technical data on food additives. Compiled by food industry experts with a proven track record of producing high quality reference work, this volume is the definitive resource for technologists in small, medium and large companies, and for workers in research, government and academic institutions. Coverage is of Preservatives, Enzymes, Gases, Nutritive additives, Emulsifiers, Flour additives, Acidulants, Sequestrants, Antioxidants, Flavour enhancers, Colour, Sweeteners, Polysaccharides, Solvents. Entries include information on: Function and Applications, Safety issues, International legal issues, Alternatives, Synonyms, Molecular Formula and mass, Alternative forms, Appearance, Boiling, melting, and flash points, density, purity, water content, solubility, Synergists, Antagonists, and more with full and easy-to-follow-up references. Reviews of the first edition: "Additives have their advantages for the food industry in order to provide safe and convenient food products. It is therefore essential that as much information as possible is available to allow an informed decision on the selection of an additive for a particular purpose. This data book provides such information - consisting of over 1000 pages and covering around 350 additives. This data book does provide a vast amount of information; it is what it claims to be! Overall, this is a very useful publication and a good reference book for anyone working in the food and dairy industry." —International Journal of Dairy Technology, Volume 59 Issue 2, May 2006 "This book is the best I have ever seen ... a clear winner over all other food additive books .... a superb edition." —SAAFOST (South African Association for Food Science and Technology)

Download or read book Handbook of Nucleating Agents written by George Wypych and published by Elsevier. This book was released on 2021-01-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nucleating Agents, Second Edition gives engineers and materials scientists the information they need to increase the production rate, modify structure and morphology, improve mechanical performance, and reduce the haze of polymeric products through proper selection of nucleating agents (and/or the so-called clarifying agents). The book analyzes the existing literature paying special attention to recent developments, and is divided into 14 chapters, each of which concentrates on essential performances of nucleating agents. Chemical origin and related properties of nucleating agents are analyzed in general terms to highlight the differences in their properties and the book also provides the most essential theoretical knowledge required for proper selection and use of nucleating and clarifying agents. This includes polymer crystallization with and without nucleating agents, parameters of crystallization, essential influences on the nucleation processes, the measures of nucleation efficiency, the mechanisms of nucleation, and the effective methods of dispersion of nucleating agents. Later chapters concentrate on the application aspects in different formulations, outlining nineteen polymer processing methods which require use of nucleating agents, forty different polymers which are known to use nucleating agents, and sixteen applied examples of commercial products with nucleating agents. The final three chapters discuss the effects of nucleating agents on physical and mechanical properties of materials, the most essential analytical techniques, and health and safety in use of nucleating agents. - Enables engineers to use nucleating agents more effectively to increase production rate, modify structure and morphology, and reduce haze of polymer products - Provides a theoretical grounding required for proper selection and use of nucleating and clarifying agents - Offers an extensive review of current applications of nucleating agents in different formulations - Includes analysis of the chemical origin and related properties of nucleating agents to highlight differences in their properties

Download or read book Ceramic Data Book written by and published by . This book was released on 1966 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-03-11 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defines the strategy for complex analytical problem solving and provides the latest information on sample handling, extractive polymer/additive analysis, chromatographic, spectroscopic, and mass spectrometric methods.

Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.

Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.

Download or read book Polyhedral Oligomeric Silsesquioxane POSS Polymer Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2021-03-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites: From Synthesis to Applications offers extensive coverage of polyhedral oligomeric silsesquioxanes and their nanocomposites, including their synthesis, characterization, interfacial interactions and advanced applications. Sections introduce essentials, information on their preparation and discussions on polymeric materials, including elastomers, thermoplastics, thermosetting polymers, polymer blends and IPNs. Further sections cover the latest analysis techniques, examine the properties of POSS-polymer nanocomposites, and discuss key application areas, such as biological, energy, defense, and space. Finally, issues surrounding industry implementation and lifecycle are explored. This is a valuable reference for researchers, scientists and advanced students in the areas of polymer composites and nanocomposites, polymer chemistry, polymer physics, polymer science, and materials science and engineering. In an industrial setting, this book will be of great interest to scientists, R&D professionals, and engineers across industries and disciplines. - Covers all aspects of polyhedral oligomeric silsesquioxanes (POSS) and their nanocomposites, including synthesis and characterization techniques, properties, analysis, applications and trends - Targets POSS nanocomposites, describing synthesis, characterization and the selection of POSS filler types according to polymeric material - Explains the preparation and utilization of POSS polymer nanocomposites for cutting-edge applications, including biological, energy, and defense field applications

Download or read book Databook of Antioxidants written by Anna Wypych and published by ChemTec Publishing. This book was released on 2020-03-11 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Antioxidants is divided into five sections covering general information, physical properties, health and safety considerations, ecological properties and the use and performance of each featured antioxidant. A general information section includes CAS #, common name/synonym, acronym, chemical category, moisture content, and more. The physical properties section features data on state, odor, color (Gardner and Platinum-cobalt scales), acid number, ash contents, and other characteristics. The health and safety section displays data on flashpoint, autoignition temperatures, explosive LEL and UEL, NFPA flammability and reactivity, ingestion, first aid, and beyond. The ecological properties portion of the book contains data on biodegradation probability, aquatic toxicity LC50, and partition coefficients, and the book concludes with a chapter on use and performance considerations with information on manufacturer, outstanding properties, typical applications, recommended dosage, concentration used, food approval, and more. This book is an excellent companion to the Handbook of Antioxidants which has also been published recently. Both books supplement each other without repeating the same information - one contains data another theory, mechanisms of action, practical effects and implications of application.

Download or read book Textile Technology Digest written by and published by . This book was released on 2001 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Databook of Green Solvents written by George Wypych and published by Elsevier. This book was released on 2019-02-15 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Green Solvents, Second Edition, includes data and information that is divided into five separate sections: General, Physical, Health, Environmental and Use. Readers interested in this subject should note that two other volumes on all essential areas of solvent usage have also been published. They include Handbook of Solvents. Volume One, Properties and Handbook of Solvents, Volume Two: Use, Health, and Environment. Together, these books provide the most comprehensive information on the subject matter. The books are the authoritative sources of knowledge, with information updated from the most recent literature and developments occurring in the field of solvents. - Contains more than 300 green solvents, from biodegradable and biorenewable, to siloxanes and perfluorocarbons - Provides practical information for use in the lab and in the field, including recommended processing methods, recommended dosages and potential substitutes - Provides critical health, safety and environmental data to help production chemists and engineers select the correct solvent - Emphasis is placed on safer, more efficient replacements of more toxic solvents

Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.

Download or read book Additives for Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2001-11-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

Download or read book Microstructure and Properties of Ceramic Materials written by Tung-sheng Yen and published by Elsevier Science & Technology. This book was released on 1984 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: