Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Materials for Advanced Power Engineering 1994 written by D. Coutsouradis and published by Springer Science & Business Media. This book was released on 1994 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of energy in the modern world goes beyond mere technology and economics to influence welfare, the environment, the quality of life and, in broad terms, civilization itself. Since the Industrial Revolution, energy conservation technology has been at the forefront of the innovation required to satisfy the needs of mankind and, more than any other, this technology has always depended on the performance of the materials used.
Download or read book Handbook of Comparative World Steel Standards written by John E. Bringas and published by ASTM International. This book was released on 2002 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Alloys for Power Plants written by A. Shirzadi and published by Elsevier. This book was released on 2014-07-30 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.
Download or read book Materials for Advanced Power Engineering 1998 written by Jacqueline Lecomte-Beckers and published by Forschungszentrum Julich. This book was released on 1998-01-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Power Plant Materials and Life Assessment written by A. Shibli and published by Elsevier. This book was released on 2014-07-24 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their continuing role in electricity generation, it is important that coal power plants operate as efficiently and cleanly as possible. Coal Power Plant Materials and Life Assessment reviews the materials used in coal plants, and how they can be assessed and managed to optimize plant operation. Part I considers the structural alloys used in coal plants. Part II then reviews performance modelling and life assessment techniques, explains the inspection and life-management approaches that can be adopted to optimize long term plant operation, and considers the technical and economic issues involved in meeting variable energy demands. - Summarizes key research on coal-fired power plant materials, their behavior under operational loads, and approaches to life assessment and defect management - Details the range of structural alloys used in coal power plants, and the life assessment techniques applicable to defect-free components under operational loads - Reviews the life assessment techniques applicable to components containing defects and the approaches that can be adopted to optimize plant operation and new plant and component design
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Plant Life Management and Performance Improvement written by John E Oakey and published by Elsevier. This book was released on 2011-09-28 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal- and gas-based power plants currently supply the largest proportion of the world's power generation capacity, and are required to operate to increasingly stringent environmental standards. Higher temperature combustion is therefore being adopted to improve plant efficiency and to maintain net power output given the energy penalty that integration of advanced emissions control systems cause. However, such operating regimes also serve to intensify degradation mechanisms within power plant systems, potentially affecting their reliability and lifespan.Power plant life management and performance improvement critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, as well as examining the operation and maintenance approaches and advanced plant rejuvenation and retrofit options that the industry are applying to ensure overall plant performance improvement and life management.Part one initially reviews plant operation issues, including fuel flexibility, condition monitoring and performance assessment. Parts two, three and four focus on coal boiler plant, gas turbine plant, and steam boiler and turbine plant respectively, reviewing environmental degradation mechanisms affecting plant components and their mitigation via advances in materials selection and life management approaches, such as repair, refurbishment and upgrade. Finally, part five reviews issues relevant to the performance management and improvement of advanced heat exchangers and power plant welds.With its distinguished editor and international team of contributors, Power plant life management and performance improvement is an essential reference for power plant operators, industrial engineers and metallurgists, and researchers interested in this important field. - Provides an overview of the improvements to plant efficiency in coal- and gas-based power plants - Critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, noting mitigation routes alongside monitoring and assessment methods - Addresses plant operation issues including fuel flexibility, condition monitoring and performance assessment
Download or read book Materials for Ultra Supercritical and Advanced Ultra Supercritical Power Plants written by Augusto Di Gianfrancesco and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies
Download or read book Welding and Joining of Aerospace Materials written by Mahesh Chaturvedi and published by Elsevier. This book was released on 2011-12-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and joining techniques play an essential role in both the manufacture and in-service repair of aerospace structures and components, and these techniques become more advanced as new, complex materials are developed. Welding and joining of aerospace materials provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials.Part one opens with a chapter on recently developed welding techniques for aerospace materials. The next few chapters focus on different types of welding such as inertia friction, laser and hybrid laser-arc welding. The final chapter in part one discusses the important issue of heat affected zone cracking in welded superalloys. Part two covers other joining techniques, including chapters on riveting, composite-to-metal bonding, diffusion bonding and recent improvements in bonding metals. Part two concludes with a chapter focusing on the use of high-temperature brazing in aerospace engineering. Finally, an appendix to the book covers the important issue of linear friction welding.With its distinguished editor and international team of contributors, Welding and joining of aerospace materials is an essential reference for engineers and designers in the aerospace, materials and welding and joining industries, as well as companies and other organisations operating in these sectors and all those with an academic research interest in the subject. - Provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials - Discusses the important issue of heat affected zone cracking in welded superalloys - Covers many joining techniques, including riveting, composite-to-metal bonding and diffusion bonding
Download or read book CASTI Metals Black Book written by John E. Bringas and published by . This book was released on 2003 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Woodhead Publishing. This book was released on 2007-06-08 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation. Topics include: key processes involved in metal dusting; how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys; effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting; processes involved in carburization and nitridation. --
Download or read book Advances in Materials Technology for Fossil Power Plants written by D. Gandy and J. Shingledecker and published by ASM International. This book was released on 2014-01-01 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.
Download or read book Diffusion in Solids written by Paul G. Shewmon and published by . This book was released on 1963 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition is an updated and revised version of the original text. It offers detailed descriptions of the methods available to predict the occurrence of diffusion in alloys subjected to various processes. Major topic areas covered include diffusion equations, atomic theory of diffusion, diffusion in dilute alloys, diffusion in a concentration gradient, diffusion in non-metals, high diffusivity paths, and thermo- and electro-transport. This is an excellent textbook for use in metallurgical and materials science and engineering education.
Download or read book Definition and Classification of Grades of Steel written by British Standards Institution and published by . This book was released on 1991 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep and Fracture of Engineering Materials and Structures written by T. Sakuma and published by Trans Tech Publications Ltd. This book was released on 1999-10-12 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 8th International Conference on Creep and Fracture of Engineering Materials and Structures, held in Tsukuba, Japan, November 1-5, 1999
