Download or read book Data Logging in Practice written by Roger Frost and published by IT in Science. This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Competition Car Data Logging written by Simon McBeath and published by Haynes Publishing. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematic list, with taxonomic keys, of all the grasses sent to Kew by Gert Hatschbach from southern and central Brazil between 1965 and 1985.

Download or read book Analysis Techniques for Racecar Data Acquisition written by Jorge Sergers and published by SAE International. This book was released on 2014-02-24 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Racecar data acquisition used to be limited to well-funded teams in high-profile championships. Today, the cost of electronics has decreased dramatically, making them available to everyone. But the cost of any data acquisition system is a waste of money if the recorded data is not interpreted correctly. This book, updated from the best-selling 2008 edition, contains techniques for analyzing data recorded by any vehicle's data acquisition system. It details how to measure the performance of the vehicle and driver, what can be learned from it, and how this information can be used to advantage next time the vehicle hits the track. Such information is invaluable to racing engineers and managers, race teams, and racing data analysts in all motorsports. Whether measuring the performance of a Formula One racecar or that of a road-legal street car on the local drag strip, the dynamics of vehicles and their drivers remain the same. Identical analysis techniques apply. Some race series have restricted data logging to decrease the team’s running budgets. In these cases it is extremely important that a maximum of information is extracted and interpreted from the hardware at hand. A team that uses data more efficiently will have an edge over the competition. However, the ever-decreasing cost of electronics makes advanced sensors and logging capabilities more accessible for everybody. With this comes the risk of information overload. Techniques are needed to help draw the right conclusions quickly from very large data sets. In addition to updates throughout, this new edition contains three new chapters: one on techniques for analyzing tire performance, one that provides an introduction to metric-driven analysis, a technique that is used throughout the book, and another that explains what kind of information the data contains about the track.

Download or read book Logging and Log Management written by Kevin Schmidt and published by Newnes. This book was released on 2012-12-31 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logging and Log Management: The Authoritative Guide to Understanding the Concepts Surrounding Logging and Log Management introduces information technology professionals to the basic concepts of logging and log management. It provides tools and techniques to analyze log data and detect malicious activity. The book consists of 22 chapters that cover the basics of log data; log data sources; log storage technologies; a case study on how syslog-ng is deployed in a real environment for log collection; covert logging; planning and preparing for the analysis log data; simple analysis techniques; and tools and techniques for reviewing logs for potential problems. The book also discusses statistical analysis; log data mining; visualizing log data; logging laws and logging mistakes; open source and commercial toolsets for log data collection and analysis; log management procedures; and attacks against logging systems. In addition, the book addresses logging for programmers; logging and compliance with regulations and policies; planning for log analysis system deployment; cloud logging; and the future of log standards, logging, and log analysis. This book was written for anyone interested in learning more about logging and log management. These include systems administrators, junior security engineers, application developers, and managers. - Comprehensive coverage of log management including analysis, visualization, reporting and more - Includes information on different uses for logs -- from system operations to regulatory compliance - Features case Studies on syslog-ng and actual real-world situations where logs came in handy in incident response - Provides practical guidance in the areas of report, log analysis system selection, planning a log analysis system and log data normalization and correlation

Download or read book The IT in Science Book of Datalogging and Control written by Roger Frost and published by IT in Science. This book was released on 1993 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2002-02-26 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has evolved into a way of life in engineering practice, and indeed pervades virtually every aspect of the modern world. As the synergistic integration of mechanical, electrical, and computer systems, the successful implementation of mechatronic systems requires the integrated expertise of specialists from each of these areas. De

Download or read book Heat Treating written by ASM Heat Treating Society. Conference and Exposition and published by ASM International. This book was released on 2005 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: provides the latest knowledge and information on scientific andvances, technology innovations, and commercial practice in heat treating. Features contributions from leading experts from around the world.

Download or read book Using Commercial Amateur Astronomical Spectrographs written by Jeffrey L. Hopkins and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amateur astronomers interested in learning more about astronomical spectroscopy now have the guide they need. It provides detailed information about how to get started inexpensively with low-resolution spectroscopy, and then how to move on to more advanced high-resolution spectroscopy. Uniquely, the instructions concentrate very much on the practical aspects of using commercially-available spectroscopes, rather than simply explaining how spectroscopes work. The book includes a clear explanation of the laboratory theory behind astronomical spectrographs, and goes on to extensively cover the practical application of astronomical spectroscopy in detail. Four popular and reasonably-priced commercially available diffraction grating spectrographs are used as examples. The first is a low-resolution transmission diffraction grating, the Star Analyser spectrograph. The second is an inexpensive fiber optic coupled bench spectrograph that can be used to learn more about spectroscopy. The third is a newcomer, the ALPY 600 spectrograph. The fourth spectrograph considered is at the other end of the market both in performance and cost, the high-resolution Lhires III. While considerably more expensive, this is a popular and excellent scientific instrument, that allows more advanced amateur astronomers to produce scientifically valuable data. With all of these tools in place, the amateur astronomer is well-prepared to forger deeper into the night sky using spectroscopy.

Download or read book Solar and Infrared Radiation Measurements Second Edition written by Frank Vignola and published by CRC Press. This book was released on 2019-07-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rather specialized field of solar and infrared radiation measurements has become increasingly important due to the increased demands by the renewable energy and climate change research communities for data with higher accuracy and increased temporal and spatial resolutions. Recent advances in radiometry, measurement systems, and information dissemination also have increased the need for refreshing the literature available for this topic. This book provides the reader with an up-to-date review of the important aspects of solar and infrared radiation measurements: radiometer design; equipment installation, operation, maintenance, and calibration; data quality assessment parameters; and the knowledge necessary to properly interpret and apply the measured data to a variety of topics. Each of the authors has more than 40 years of experience with this subject, primarily as the result of developing and operating multiple measurement stations, working with the industry to improve radiometry, and conducting various research projects. The book’s scope and subject matter have been designed to help a wide audience gain a general understanding of this subject and to serve as a technical reference. A student new to the field will benefit from the review of terminology and the historical perspective for radiometry before addressing more detailed topics in radiometry that we hope will be of interest to the more experienced reader.  Describes the strengths and weaknesses of irradiance instruments  Provides detailed information on how to assess uncertainty in measurements  Offers comprehensive background information needed to understand the use of solar instrumentation  Discusses design concepts for shadowband radiometers, sky imagers, and satellite-based estimates of solar irradiance at the Earth’s surface  Includes chapter-end questions, references, and useful links

Download or read book Well Logging written by Oberto Serra and published by Editions Technips. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains in detail all the physical principles on which are based the logging tools Wireline (WL) and Logging While Drilling (LWD). It describes as well the fundamental tools of the principal service companies, focusing on the factors that influence measurement and on the main applications in geology, geophysics, and petrophysics. As such it constitutes a reference document for all geologists and engineers involved in petroleum exploration and field development.

Download or read book Automating with SIMATIC S7 1500 written by Hans Berger and published by John Wiley & Sons. This book was released on 2017-09-19 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SIMATIC S7-1500 programmable logic controller (PLC) sets standards in productivity and efficiency. By its system performance and with PROFINET as the standard interface, it ensures short system response times and a maximum of flexibility and networkability for demanding automation tasks in the entire production industry and in applications for medium-sized to high-end machines. The engineering software STEP 7 Professional operates inside TIA Portal, a user interface that is designed for intuitive operation. Functionality includes all aspects of automation: from the configuration of the controllers via programming in the IEC languages LAD, FBD, STL, and SCL up to the program test. In the book, the hardware components of the automation system S7-1500 are presented including the description of their configuration and parameterization. A comprehensive introduction into STEP 7 Professional V14 illustrates the basics of programming and troubleshooting. Beginners learn the basics of automation with Simatic S7-1500, users switching from other controllers will receive the relevant knowledge.

Download or read book Handbook of Research on Web Log Analysis written by Jansen, Bernard J. and published by IGI Global. This book was released on 2008-10-31 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book reflects on the multifaceted themes of Web use and presents various approaches to log analysis"--Provided by publisher.

Download or read book Instrumentation Reference Book written by Walt Boyes and published by Butterworth-Heinemann. This book was released on 2009-11-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discipline of instrumentation has grown appreciably in recent years because of advances in sensor technology and in the interconnectivity of sensors, computers and control systems. This 4e of the Instrumentation Reference Book embraces the equipment and systems used to detect, track and store data related to physical, chemical, electrical, thermal and mechanical properties of materials, systems and operations. While traditionally a key area within mechanical and industrial engineering, understanding this greater and more complex use of sensing and monitoring controls and systems is essential for a wide variety of engineering areas--from manufacturing to chemical processing to aerospace operations to even the everyday automobile. In turn, this has meant that the automation of manufacturing, process industries, and even building and infrastructure construction has been improved dramatically. And now with remote wireless instrumentation, heretofore inaccessible or widely dispersed operations and procedures can be automatically monitored and controlled. This already well-established reference work will reflect these dramatic changes with improved and expanded coverage of the traditional domains of instrumentation as well as the cutting-edge areas of digital integration of complex sensor/control systems. - Thoroughly revised, with up-to-date coverage of wireless sensors and systems, as well as nanotechnologies role in the evolution of sensor technology - Latest information on new sensor equipment, new measurement standards, and new software for embedded control systems, networking and automated control - Three entirely new sections on Controllers, Actuators and Final Control Elements; Manufacturing Execution Systems; and Automation Knowledge Base - Up-dated and expanded references and critical standards

Download or read book Practical Advanced Biology written by Tim King and published by Nelson Thornes. This book was released on 2001 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible resource that can be used alongside the Advanced Biology text or any other core Advanced Biology text, as it covers the practical element for AS and A Level Biology.

Download or read book Interfacing the IBM PC to Medical Equipment written by Richard W. D. Nickalls and published by Cambridge University Press. This book was released on 1995-03-09 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computerisation in the medical environment has increased, so the advantages of storage and computer analysis of data from various equipment has become well recognised. Most medical monitoring and measurement equipment now supports an RS-232 serial interface allowing for direct computer access both in terms of data analysis and equipment control. This very practical book describes the techniques used for interfacing a PC to a range of medical equipment used internationally in the areas of anaesthesia, intensive care, surgery, respiratory medicine and physiology and will constitute a valuable resource for a wide audience of equipment users in these fields.

Download or read book Control and Datalogging Year 1 written by Roy Jarratt and published by Nelson Thornes. This book was released on 2004 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Troubleshooters are ICT Unit Plans designed to build skills, confidence and understanding, providing a wide range of materials for teaching specific QCA units. They provide watertight support for each of the three main strands: Control & Datalogging, Spreadsheets and Databases.

Download or read book PLCs SCADA Theory and Practice written by Rajesh Mehra and published by Laxmi Publications. This book was released on 2012 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: