Download or read book Data driven Condition Monitoring in Mining Vehicles written by Erik Jakobsson and published by Linköping University Electronic Press. This book was released on 2019-11-20 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Situation awareness is a crucial capability of any autonomous system, including mining vehicles such as drill rigs and mine trucks. Typically situation awareness is interpreted as the capability of an autonomous system to interpret its surroundings and the intentions of other agents. The internal system awareness however, is often not receiving the same focus, even though the success of any given mission is completely dependent of the condition of the agents themselves. The internal system awareness in the form of vehicle health is the focus of this thesis. As the mining industry becomes increasingly automated, and vehicles become increasingly advanced, the need for condition monitoring and prognostics will continue to rise. This thesis explores data-driven methods that estimate the health of mining vehicles to accommodate those needs. We do so by utilizing available sensor signals, common on a large amount of mining vehicles, to make assessments of the current vehicle condition and tasks. The mining industry is characterized by small series of highly specialized vehicles, which affects the possibility to use more traditional prognostic solutions. The resulting health information can be used both to aid in tasks such as maintenance planning, but also as an important input to decision making for the planning system, i.e. how to run the vehicle for minimum wear and damage, while maintaining other mission objectives. The contributions include: a) A method to use operational data to estimate damage on the frame of a mine truck. This is done using system identification to find a model describing stresses in the structure with input from other sensors such as accelerometers, load sensors and pressure sensors. The estimated stress time signal is in turn used to calculate accumulated damage, and is shown to reveal interesting conclusions on driver behavior. b) A method to characterize the different driving tasks by using an accelerometer and a convolutional neural network. We show that the model is capable of classifying the vehicle task correctly in 96 % of the cases. And finally c), a system for underground road monitoring, where a quarter car model and a Kalman filter are used to generate an estimate of the road profile, while positioning the vehicle using inertial measurements and access point signal strength.
Download or read book Road Condition Estimation with Data Mining Methods using Vehicle Based Sensors written by Masino, Johannes and published by KIT Scientific Publishing. This book was released on 2021-03-31 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work provides novel methods to process inertial sensor and acoustic sensor data for road condition estimation and monitoring with application in vehicles, which serve as sensor platforms. Furthermore, methods are introduced to combine the results from various vehicles for a more reliable estimation.
Download or read book Advances in Asset Management and Condition Monitoring written by Andrew Ball and published by Springer Nature. This book was released on 2020-08-27 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging interdisciplinary areas of condition monitoring and diagnostic engineering management. The contents discuss the latest tools and techniques in the multidisciplinary field of performance monitoring, root cause failure modes analysis, failure diagnosis, prognosis, and proactive management of industrial systems. There is a special focus on digitally enabled asset management and covers several topics such as condition monitoring, maintenance, structural health monitoring, non-destructive testing and other allied areas. Bringing together expert contributions from academia and industry, this book will be a valuable resource for those interested in latest condition monitoring and asset management techniques.
Download or read book Vibration Based Condition Monitoring of Wind Turbines written by Tomasz Barszcz and published by Springer. This book was released on 2018-12-04 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail different types of vibration signals and the signal processing methods, including signal resampling and signal envelope, used for condition monitoring of drivetrains. A special emphasis is placed on wind turbines and on the fact that they work in highly varying operational conditions. The core of the book is devoted to cutting-edge methods used to validate and process vibration data in these conditions. Key case studies, where advanced signal processing methods are used to detect failures of gearboxes and bearings of wind turbines, are described and discussed in detail. Vibration sensors, SCADA (Supervisory Control and Data Acquisition), portable data analyzers and online condition monitoring systems, are also covered. This book offers a timely guide to both researchers and professionals working with wind turbines (but also other machines), and to graduate students willing to extend their knowledge in the field of vibration analysis.
Download or read book Advanced Information Systems Engineering Workshops written by Henderik A. Proper and published by Springer. This book was released on 2019-05-23 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of three international workshops held in Rome, Italy, in June 2019, associated with the 31st International Conference on Advanced Information Systems Engineering, CAiSE 2019. These workshops were: COGNISE, The 7th International Workshop on Cognitive Aspects of Information Systems Engineering KET4DF, First International Workshop on Key Enabling Technologies for Digital Factories BIOC&FAISE, Joint Workshop on Blockchains for Inter-Organizational Collaboration and Felxible Advanced Information Systems The total of 19 papers presented in this volume were carefully reviewed and selected from 39 submissions.
Download or read book Equipment Health Monitoring in Complex Systems written by Stephen P. King, and published by Artech House. This book was released on 2017-10-31 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely resource provides a practical introduction to equipment health monitoring (EHM) to ensure the cost effective operation and control of critical systems in defense, industrial, and healthcare applications. This book highlights how to frame health monitoring design applications within a system engineering process, to ensure an optimized EHM functional architecture and practical algorithm design. This book clarifies the need for intelligent diagnostics and proposed health monitoring framework. Machine learning for health monitoring, including feature extraction, data visualization, model boundaries and performance is presented. Details about monitoring aircraft engines and model based monitoring systems are described in detail. Packed with two full chapters of case studies within industrial and healthcare settings, this book identifies key problems and provides insightful techniques for solving them. This resource provides a look into the future direction in health monitoring and emerging developments within sensing technology, big data analytics, and advanced computing capabilities.
Download or read book Big data analytics for smart healthcare applications written by Celestine Iwendi and published by Frontiers Media SA. This book was released on 2023-04-17 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AI Factory written by Ramin Karim and published by CRC Press. This book was released on 2023-05-24 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents compendium of methodologies and technologies in industrial AI and digitalization Illustrates sensor to actuation approach showing complete cycle, that defines and differences AI and digitalization concept Covers a broad range of academic and industrial issues within the field of asset management Discusses impact of Industry 4.0 in other sectors Includes a dedicated chapter on real-time case studies
Download or read book Toward Sustainable And Economic Smart Mobility Shaping The Future Of Smart Cities written by Mahmoud Hashem Eiza and published by World Scientific. This book was released on 2020-06-18 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, developments in smart cars, mobile devices, internet of things and vehicular communications are revolutionizing the future of smart cities. With the rapid integration of these smart devices into our surroundings, we are heading to a new era of a highly connected and environmentally friendly ecosystem.This book offers a unique opportunity for the reader to explore state-of-the-art developments in applications, technologies (e.g., Big Data and artificial intelligence), services and research trends in smart mobility for smart cities. It also provides a reference for professionals and researchers in the areas of smart mobility (e.g., autonomous valet parking, passenger trajectory data, smart traffic control systems) and recent technical trends on their enabling technologies. The materials have been carefully selected to reflect the latest developments in the field with many novel contributions from academics and industry experts from around the world.
Download or read book Proceedings of the 15th International Conference on Vibration Problems written by and published by Springer Nature. This book was released on 2024 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the Proceedings of the 15th International Conference on Vibration Problems (ICoVP 2023) and covers vibration problems of engineering both in theoretical and applied fields. Various topics covered in this volume are Vibration in Oil and Gas, Structural Dynamics, Structural Health Monitoring, Rotor Dynamics, Measurement Diagnostics in Vibration, Computational methods in Vibration and Wave Mechanics, Dynamics of Coupled Systems, Dynamics of Micro and Macro Systems, Multi-body dynamics, Nonlinear dynamics Reliability of dynamic systems, Vibrations due to solid/liquid phase interaction, Vibrations of transport systems, Seismic Isolation, Soil dynamics, Geotechnical earthquake engineering Dynamics of concrete structures, Underwater shock waves (Tsunami), Vibration control, uncertainty quantification and reliability analysis of dynamic structures, Vibration problems associated with nuclear power reactors, Earthquake engineering, impact and wind loading and vibration in composite structures and fracture mechanics. This book will be useful for both professionals and researchers working on vibrations problems in multidisciplinary areas.
Download or read book Virtual Lifelong Learning Educating Society with Modern Communication Technologies written by Neha and published by Bentham Science Publishers. This book was released on 2024-06-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference addresses the transformative landscape of education through the lens of modern technologies. It imparts a comprehensive overview of the challenges, opportunities, and future visions in education by covering the dynamic intersection of e-learning, virtual teaching, and cutting-edge technologies. The book includes an extensive spectrum of 14 topics commencing with a basic study on E-learning and teaching in the new millennium. Next, the work explores substantial topics such as the challenges and opportunities of virtual learning, the impact of the National Education Policy 2020, the role of Virtual Learning in bridging gender gaps, and the benefits and challenges for differently-abled students. Contributors also discuss new developments in education including the integration of ICT in mechanical engineering, the use of AR and VR to virtualize academic activities, and blockchain technology in education. The last two chapters explore the applications, challenges, and possibilities of machine learning and data analytics in the context of m-Health and the impact analysis of online education development. Key features of the reference are: a simplified exploration of the cutting-edge technologies that are reshaping the educational environment, a forward-looking view of the future of education, and practical insights into the drawbacks and advantages of virtual learning. Readers will get a broad perspective of information on virtual education technology with references and case studies that provide a holistic view of modern educational structures. This book is tailored for educators, researchers and anyone working in the field of education and technology who are looking for a thorough understanding of the transformative prospects of virtual lifelong learning and its implications for building an inclusive society and learning environment.
Download or read book Artificial Self recovery and Autonomous Health of Machine written by Gao Jinji and published by Springer Nature. This book was released on 2022-10-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the research fields of engineering cybernetics, bionics, artificial self-recovery and engineering self-recoveries. It explains the scientific and technological research results of artificial self-recovery, autonomous health technology and the application cases of assisted rehabilitation and autonomous health engineering. It provides guidance, latest research trends and development direction for researchers, scholars and engineers engaged in mechanical equipment fault diagnosis and autonomous health.
Download or read book Advances in Mechanical Design written by Jianrong Tan and published by Springer Nature. This book was released on with total page 2698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model based Health Monitoring of Hybrid Systems written by Danwei Wang and published by Springer Science & Business Media. This book was released on 2013-05-23 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents a comprehensive framework and effective techniques for in-depth analysis, clear design procedure, and efficient implementation of diagnosis and prognosis algorithms for hybrid systems. It offers an overview of the fundamentals of diagnosis\prognosis and hybrid bond graph modeling. This book also describes hybrid bond graph-based quantitative fault detection, isolation and estimation. Moreover, it also presents strategies to track the system mode and predict the remaining useful life under multiple fault condition. A real world complex hybrid system—a vehicle steering control system—is studied using the developed fault diagnosis methods to show practical significance. Readers of this book will benefit from easy-to-understand fundamentals of bond graph models, concepts of health monitoring, fault diagnosis and failure prognosis, as well as hybrid systems. The reader will gain knowledge of fault detection and isolation in complex systems including those with hybrid nature, and will learn state-of-the-art developments in theory and technologies of fault diagnosis and failure prognosis for complex systems.
Download or read book Handbook of Dynamic Data Driven Applications Systems written by Erik P. Blasch and published by Springer Nature. This book was released on 2022-05-11 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Dynamic Data Driven Applications Systems establishes an authoritative reference of DDDAS, pioneered by Dr. Darema and the co-authors for researchers and practitioners developing DDDAS technologies. Beginning with general concepts and history of the paradigm, the text provides 32 chapters by leading experts in ten application areas to enable an accurate understanding, analysis, and control of complex systems; be they natural, engineered, or societal: The authors explain how DDDAS unifies the computational and instrumentation aspects of an application system, extends the notion of Smart Computing to span from the high-end to the real-time data acquisition and control, and manages Big Data exploitation with high-dimensional model coordination. The Dynamically Data Driven Applications Systems (DDDAS) paradigm inspired research regarding the prediction of severe storms. Specifically, the DDDAS concept allows atmospheric observing systems, computer forecast models, and cyberinfrastructure to dynamically configure themselves in optimal ways in direct response to current or anticipated weather conditions. In so doing, all resources are used in an optimal manner to maximize the quality and timeliness of information they provide. Kelvin Droegemeier, Regents’ Professor of Meteorology at the University of Oklahoma; former Director of the White House Office of Science and Technology Policy We may well be entering the golden age of data science, as society in general has come to appreciate the possibilities for organizational strategies that harness massive streams of data. The challenges and opportunities are even greater when the data or the underlying system are dynamic - and DDDAS is the time-tested paradigm for realizing this potential. Sangtae Kim, Distinguished Professor of Mechanical Engineering and Distinguished Professor of Chemical Engineering at Purdue University
Download or read book Experimental Vibration Analysis for Civil Engineering Structures written by Maria Pina Limongelli and published by Springer Nature. This book was released on 2023-08-28 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents peer-reviewed contributions from the 10th International Conference on Experimental Vibration Analysis for Civil Engineering Structures (EVACES), held in Milan, Italy on August 30-September 1, 2023. The event brought together engineers, scientists, researchers, and practitioners, providing a forum for discussing and disseminating the latest developments and achievements in all major aspects of dynamic testing for civil engineering structures, including instrumentation, sources of excitation, data analysis, system identification, monitoring and condition assessment, in-situ and laboratory experiments, codes and standards, and vibration mitigation. The topics included but were not limited to: damage identification and structural health monitoring; testing, sensing and modeling; vibration isolation and control; system and model identification; coupled dynamical systems (including human–structure, vehicle–structure, and soil–structure interaction); and application of advanced techniques involving the Internet of Things, robot, UAV, big data and artificial intelligence.
Download or read book Handbook of Research on Data Driven Mathematical Modeling in Smart Cities written by Pramanik, Sabyasachi and published by IGI Global. This book was released on 2023-02-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart city utilizes ICT technologies to improve the working effectiveness, share various data with the citizens, and enhance political assistance and societal wellbeing. The fundamental needs of a smart and sustainable city are utilizing smart technology for enhancing municipal activities, expanding monetary development, and improving citizens’ standards of living. The Handbook of Research on Data-Driven Mathematical Modeling in Smart Cities discusses new mathematical models in smart and sustainable cities using big data, visualization tools in mathematical modeling, machine learning-based mathematical modeling, and more. It further delves into privacy and ethics in data analysis. Covering topics such as deep learning, optimization-based data science, and smart city automation, this premier reference source is an excellent resource for mathematicians, statisticians, computer scientists, civil engineers, government officials, students and educators of higher education, librarians, researchers, and academicians.
