Download or read book Optimal Sampled Data Control Systems written by Tongwen Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the many techniques for designing linear multivariable analogue controllers, the two most popular optimal ones are H2 and H-infinity optimization. The fact that most new industrial controllers are digital provides strong motivation for adapting or extending these techniques to digital control systems. This book, now available as a corrected reprint, attempts to do so. Part I presents two indirect methods of sampled-data controller design: These approaches include approximations to a real problem, which involves an analogue plant, continuous-time performance specifications, and a sampled-data controller. Part II proposes a direct attack in the continuous-time domain, where sampled-data systems are time-varying. The findings are presented in forms that can readily be programmed in, e.g., MATLAB.

Download or read book Data Driven Science and Engineering written by Steven L. Brunton and published by Cambridge University Press. This book was released on 2022-05-05 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook covering data-science and machine learning methods for modelling and control in engineering and science, with Python and MATLAB®.

Download or read book Practical Data Acquisition for Instrumentation and Control Systems written by John Park and published by Newnes. This book was released on 2003-07-28 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Data Acquisition & Control; Analog and Digital Signals; Signal Conditioning; The Personal Computer for Real Time Work; Plug-in Data Acquisition Boards; Serial Data Communications; Distributed & Standalone Loggers/Controllers; IEEE 488 Standard; Ethernet & LAN Systems; The Universal Serial Bus (USB); Specific Techniques; The PCMCIA Card; Appendix A: Glossary; Appendix B: IBM PC Bus Specifications; Appendix C: Review of the Intel 8255 PPI Chip; Appendix D: Review of the Intel 8254 Timer-Counter Chip; Appendix E: Thermocouple Tables; Appendix F: Numbers Systems; Appendix G: GPIB (IEEE-488) Mnemonics & their Definition; Appendix H: Practical Laboratories & Demonstrations; Appendix I: Command Structure & Programming.

Download or read book Discrete data Control Systems written by Benjamin C. Kuo and published by . This book was released on 1974 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.

Download or read book An Introduction to Data Driven Control Systems written by Ali Khaki-Sedigh and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Data-Driven Control Systems An introduction to the emerging dominant paradigm in control design Model-based approaches to control systems design have long dominated the control systems design methodologies. However, most models require substantial prior or assumed information regarding the plant’s structure and internal dynamics. The data-driven paradigm in control systems design, which has proliferated rapidly in recent decades, requires only observed input-output data from plants, making it more flexible and broadly applicable. An Introduction to Data-Driven Control Systems provides a foundational overview of data-driven control systems methodologies. It presents key concepts and theories in an accessible way, without the need for the complex mathematics typically associated with technical publications in the field, and raises the important issues involved in applying these approaches. The result is a highly readable introduction to what promises to become the dominant control systems design paradigm. Readers will also find: An overview of philosophical-historical issues accompanying the emergence of data-driven control systems Design analysis of several conventional data-driven control systems design methodologies Algorithms and simulation results, with numerous examples, to facilitate the implementation of methods An Introduction to Data-Driven Control Systems is ideal for students and researchers in control theory or any other research area related to plant design and production.

Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.

Download or read book A First Course in Control System Design written by Kamran Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems are pervasive in our lives. Our homes have environmental controls. The appliances we use, such as the washing machine, microwave, etc. carry embedded controllers in them. We fly in airplanes and drive automobiles that extensively use control systems. The industrial plants that produce consumer goods run on process control systems. The recent drive toward automation has increased our reliance on control systems technology.This book discusses control systems design from a model-based perspective for dynamic system models of single-input single-output type. The emphasis in this book is on understanding and applying the techniques that enable the design of effective control systems in multiple engineering disciplines. The book covers both time-domain and the frequency-domain design methods, as well as controller design for both continuous-time and discrete-time systems. MATLAB© and its Control Systems Toolbox are extensively used for design.

Download or read book Sampled data Control Systems written by Eliahu Ibrahim Jury and published by . This book was released on 1977 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Internet based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.

Download or read book Data driven Design of Fault Diagnosis and Fault tolerant Control Systems written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2014-04-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and demonstrated on industrial case systems. Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems will be of interest to process and control engineers, engineering students and researchers with a control engineering background.

Download or read book Access Control for Databases written by Elisa Bertino and published by Now Publishers Inc. This book was released on 2011-02 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive survey of the foundational models and recent research trends in access control models and mechanisms for database management systems.

Download or read book Applied Control Systems Design written by Magdi S. Mahmoud and published by Springer Science & Business Media. This book was released on 2012-04-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these exercises use MATLAB® to make computation and visualization more straightforward. Applied Control System Design will be of interest to academic researchers for its comparison of different systems models and their response to different control methods and will assist graduate students in learning the practical necessities of advanced control system design. The consistent reference to real systems coupled with self-learning tools will assist control practitioners who wish to keep up to date with the latest control design ideas.

Download or read book Data Driven Controller Design written by Alexandre Sanfelice Bazanella and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-Based Controller Design presents a comprehensive analysis of data-based control design. It brings together the different data-based design methods that have been presented in the literature since the late 1990’s. To the best knowledge of the author, these data-based design methods have never been collected in a single text, analyzed in depth or compared to each other, and this severely limits their widespread application. In this book these methods will be presented under a common theoretical framework, which fits also a large family of adaptive control methods: the MRAC (Model Reference Adaptive Control) methods. This common theoretical framework has been developed and presented very recently. The book is primarily intended for PhD students and researchers - senior or junior - in control systems. It should serve as teaching material for data-based and adaptive control courses at the graduate level, as well as for reference material for PhD theses. It should also be useful for advanced engineers willing to apply data-based design. As a matter of fact, the concepts in this book are being used, under the author’s supervision, for developing new software products in a automation company. The book will present simulation examples along the text. Practical applications of the concepts and methodologies will be presented in a specific chapter.

Download or read book Data and Control Systems written by and published by . This book was released on 1977 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Systems Design written by Vladimir Zakian and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, a comprehensive new framework for the theory and design of control systems has emerged. It treats a range of significant and ubiquitous design problems more effectively than the conventional framework. Control Systems Design brings together contributions from the originators of the new framework in which they explain, expand and revise their research work. It is divided into four parts: - basic principles, including those of matching and inequalities with adjustments for robust matching and matching based on H-infinity methods and linear matrix inequalities; - computational methods, including matching conditions for transient inputs and design of a sampled-data control system; - search methods including search with simulated annealing, genetic algorithms and evaluation of the node array method; - case studies, including applications in distillation, benchmarking critical control of magnetic levitation systems and the use of the principle of matching in cruise control.

Download or read book Practical Data Communications for Instrumentation and Control written by John Park and published by Newnes. This book was released on 2003-07-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of Data Communications; Basic Data Communication Principles; Physical Serial Communication Standards; Error Detection; Cabling Basics; Electrical Noise and Interference; Modems and Multiplexers; Introduction to Protocols; Open Systems Interconnection Model; Industrial Protocols; HART Protocol; Open Industrial Fieldbus and DeviceNet Systems; Local Area Networks; Appendix A: Numbering Systems; Appendix B: Cyclic Redundancy Check (CRC) Program Listing; Appendix C: Serial Link Design; Glossary.