Download or read book Damage Mechanics and Micromechanics of Localized Fracture Phenomena in Inelastic Solids written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2012-01-29 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book resulted from a series of lecture notes presented in CISM, Udine in July 7 -11, 2008. The papers inform about recent advances in continuum damage mechanics for both metals and metal matrix composites as well as the micromechanics of localization in inelastic solids. Also many of the different constitutive damage models that have recently appeared in the literature and the different approaches to this topic are presented, making them easily accessible to researchers and graduate students in civil engineering, mechanical engineering, engineering mechanics, aerospace engineering, and material science.
Download or read book IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials written by André Pineau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Download or read book Advances in Sound Localization written by Pawel Strumillo and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sound source localization is an important research field that has attracted researchers' efforts from many technical and biomedical sciences. Sound source localization (SSL) is defined as the determination of the direction from a receiver, but also includes the distance from it. Because of the wave nature of sound propagation, phenomena such as refraction, diffraction, diffusion, reflection, reverberation and interference occur. The wide spectrum of sound frequencies that range from infrasounds through acoustic sounds to ultrasounds, also introduces difficulties, as different spectrum components have different penetration properties through the medium. Consequently, SSL is a complex computation problem and development of robust sound localization techniques calls for different approaches, including multisensor schemes, null-steering beamforming and time-difference arrival techniques. The book offers a rich source of valuable material on advances on SSL techniques and their applications that should appeal to researches representing diverse engineering and scientific disciplines.
Download or read book Structural Geology written by Bruce E. Hobbs and published by Elsevier. This book was released on 2014-11-21 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Geology is a groundbreaking reference that introduces you to the concepts of nonlinear solid mechanics and non-equilibrium thermodynamics in metamorphic geology, offering a fresh perspective on rock structure and its potential for new interpretations of geological evolution. This book stands alone in unifying deformation and metamorphism and the development of the mineralogical fabrics and the structures that we see in the field. This reflects the thermodynamics of systems not at equilibrium within the framework of modern nonlinear solid mechanics. The thermodynamic approach enables the various mechanical, thermal, hydrological and chemical processes to be rigorously coupled through the second law of thermodynamics, invariably leading to nonlinear behavior. The book also differs from others in emphasizing the implications of this nonlinear behavior with respect to the development of the diverse, complex, even fractal, range of structures in deformed metamorphic rocks. Building on the fundamentals of structural geology by discussing the nonlinear processes that operate during the deformation and metamorphism of rocks in the Earth's crust, the book's concepts help geoscientists and graduate-level students understand how these processes control or influence the structures and metamorphic fabrics—providing applications in hydrocarbon exploration, ore mineral exploration, and architectural engineering. - Authored by two of the world's foremost experts in structural geology, representing more than 70 years of experience in research and instruction - Nearly 300 figures, illustrations, working examples, and photographs reinforce key concepts and underscore major advances in structural geology
Download or read book Archives of Mechanics written by and published by . This book was released on 2008 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Mechanics written by D. Krajcinovic and published by Elsevier. This book was released on 1996-04-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first truly comprehensive study of damage mechanics. All concepts are carefully identified and defined in micro- and macroscopic scales. In terms of the methods and observation scales, the main part of the book is divided into three chapters. These chapters consider the stochastic models applied to atomistic scale, micromechanical models (for arbitary concentrations of defects) on microscopic scale and continuum models on the macroscopic scale. It is intended for people who are doing or planning to do research in the mechanics and material science aspects of brittle deformation of solids with heterogeneous microstructure.
Download or read book Fracture and Damage in Quasibrittle Structures written by Z.P. Bazant and published by CRC Press. This book was released on 2004-01-14 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding of failure of quasibrittle materials is of paramount importance in many engineering fields. This subject has become a broad and important field of considerable mathematical complexity, with many competing models and unsolved problems. Attention in this volume focuses on concrete, rock, masonry, toughened ceramics, ice and other quasibrittle materials characterized by the development of large zones of cracking or other microstructural damage, and its localization into major fractures.
Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a
Download or read book Fracture micromechanics of polymer materials written by V.S. Kuksenko and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last two decades fracture theory has been one of the most rapidly advancing fields of continuous media mechanics. Noteworthy suc cess has been achieved in linear fracture mechanics where the propagation of the macrocrack in elastic materials is under study. However, fracture of materials is by no means a simple process since it involves fracture of structural elements ranging from atomic sizes to macrocracks. To obtain all information about how and why materials fail, all stages of the process must be studied. For a long time both mechanical engineers and physicists have been concerned with the problem of the fracture of solids. Unfortunately, most of their work has been independent of the others. To solve the problem not only requires the minds and work of mechanical engineers and physicists but chemists and other specialists must be consulted as well. In this book we will consider some conclusions of the "physical" and "mechanical" schools acquired by the A. F. Joffe Physics-Technical Institute of the USSR Academy of Sciences in Leningrad and the Institute of Polymer Mechanics of Latvian SSR Academy of Sciences in Riga. The methods for studying the phenomena of fracture applied at both Institutes are different yet complimentary to one another; the materials tested are also sometimes different.
Download or read book Fracture and Damage of Concrete and Rock FDCR 2 written by H.P. Rossmanith and published by CRC Press. This book was released on 1993-04-22 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the Proceedings of the International Conference held in Vienna in November 1992 dealing with ageing, fatigue and fracture of concrete and concrete structures. Special sections cover demolition and recycling, and anchorage engineering. As well as selected international contributions, five specially invited plenary papers are included
Download or read book Damage and Fracture of Disordered Materials written by Dusan Krajcinovic and published by Springer. This book was released on 2014-05-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal objective of this book is to relate the random distributions of defects and material strength on the microscopic scale with the deformation and residual strength of materials on the macroscopic scale. To reach this goal the authors considered experimental, analytical and computational models on atomic, microscopic and macroscopic scales.
Download or read book Damage Mechanics in Engineering Materials written by Jiann-Wen Woody Ju and published by Elsevier. This book was released on 1998-03-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micromechanical constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.
Download or read book Discrete and Continuum Models for Complex Metamaterials written by Francesco dell'Isola and published by Cambridge University Press. This book was released on 2020-03-12 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together contributions on a diverse range of topics, this text explores the relationship between discrete and continuum mechanics as a tool to model new and complex metamaterials. Providing a comprehensive bibliography and historical review of the field, it covers mechanical, acoustic and pantographic metamaterials, discusses Naive Model Theory and Lagrangian discrete models, and their applications, and presents methods for pantographic structures and variational methods for multidisciplinary modeling and computation. The relationship between discrete and continuous models is discussed from both mathematical and engineering viewpoints, making the text ideal for those interested in the foundation of mechanics and computational applications, and innovative viewpoints on the use of discrete systems to model metamaterials are presented for those who want to go deeper into the field. An ideal text for graduate students and researchers interested in continuum approaches to the study of modern materials, in mechanical engineering, civil engineering, applied mathematics, physics, and materials science.
Download or read book Recent Trends in Fracture and Damage Mechanics written by Geralf Hütter and published by Springer. This book was released on 2015-09-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics in fracture and damage mechanics. It presents historical perspectives as well as recent innovative developments, presented by peer reviewed contributions from internationally acknowledged authors. The volume deals with the modeling of fracture and damage in smart materials, current industrial applications of fracture mechanics, and it explores advances in fracture testing methods. In addition, readers will discover trends in the field of local approach to fracture and approaches using analytical mechanics. Scholars in the fields of materials science, engineering and computational science will value this volume which is dedicated to Meinhard Kuna on the occasion of his 65th birthday in 2015. This book incorporates the proceedings of an international symposium that was organized to honor Meinhard Kuna’s contributions to the field of theoretical and applied fracture and damage mechanics.
Download or read book Fracture of Brittle Disordered Materials Concrete Rock and Ceramics written by G. Baker and published by CRC Press. This book was released on 2004-01-14 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the invited IUTAM Symposium in September 1993. The contributions discuss recent advances in fracture mechanics studies of concrete, rock, ceramics and other brittle disordered materials at micro and structural levels. It draws together research and new applications in continuum, damage and fracture mechanics approaches.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Fatigue written by Vladimir V. Bolotin and published by CRC Press. This book was released on 2020-07-09 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Fatigue addresses the range of topics concerning damage, fatigue, and fracture of engineering materials and structures. The core of this resource builds upon the synthesis of micro- and macro-mechanics of fracture. In micromechanics, both the modeling of mechanical phenomena on the level of material structure and the continuous approach are based on the use of certain internal field parameters characterizing the dispersed micro-damage. This is referred to as continuum damage mechanics. The author develops his own theory for macromechanics, called analytical fracture mechanics. This term means the system cracked body - loading or loading device - is considered as a mechanical system and the tools of analytical (rational) mechanics are applied thoroughly to describe crack propagation until the final failure. Chapter discuss: preliminary information on fatigue and engineering methods for design of machines and structures against failures caused by fatigue fatigue crack nucleation, including microstructural and continuous models theory of fatigue crack propagation fatigue crack growth in linear elastic materials subject to dispersed damage fatigue cracks in elasto-plastic material, including crack growth retardation due to overloading as well as quasistationary approximation fatigue and related phenomena in hereditary solids application of the theory fatigue crack growth considering environmental factors unidirectional fiber composites with ductile matrix and brittle, initially continuous fibers laminate composites Mechanics of Fatigue serves students dealing with mechanical aspects of fatigue, conducting research in fracture mechanics, structural safety, mechanics of composites, as well as modern branches of mechanics of solids and structures.
