Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Continuum Damage and Fracture Mechanics written by Andreas Öchsner and published by Springer. This book was released on 2015-10-15 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers readers an introduction to fracture mechanics, equipping them to grasp the basic ideas of the presented approaches to modeling in applied mechanics In the first part, the book reviews and expands on the classical theory of elastic and elasto-plastic material behavior. A solid understanding of these two topics is the essential prerequisite to advancing to damage and fracture mechanics. Thus, the second part of this course provides an introduction to the treatment of damage and fractures in the context of applied mechanics Wherever possible, the one-dimensional case is first introduced and then generalized in a following step. This departs somewhat from the more classical approach, where first the most general case is derived and then simplified to special cases. In general, the required mathematics background is kept to a minimum Tutorials are included at the end of each chapter, presenting the major steps for the solution and offering valuable tips and tricks. The supplementary problems featured in the book
Download or read book A Course on Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new branch of science usually develops thus. Somebody publishes the basic ideas. Hesitatingly at first, then little by little, other original contributions appear, until a certain threshold is reached. Then, overview articles are printed, conferences are held, and a first mention is made in textbooks, until specialized monographs are written. Continuum darnage mechanics has reached that status now. To analyze or, if possible, to predict the failure of machine parts or other structures is one of the main goals of engineering science. Consequently fracture mechanics became one of its leading branches. It was based on the analysis of existing cracks. However, especially under conditions of cyclic loading, this might be too late to prevent a disaster. Therefore, the question regarding the precursory state, that is, the evolution of intemal darnage before macrocracks become visible, was then posed. One of the successful approaches to the problern was Weibull's theory which examined, in a statistical manner, the "weakest link" in the material volume under consideration. Unfortunately it proved too difficult mathematically to be applied to complicated parts or structures. Therefore it was highly appreciated by the scientific of material community when L. M. Kachanov published in 1958 a simple model darnage which subsequently could be extended to brittle elastic, plastic or viscous materials under all conditions of uniaxial or multiaxial, simple or cyclic loadings, so that it may be considered nearly universal.
Download or read book Continuum Damage Mechanics written by Sumio Murakami and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry. This, in turn, has caused more interest in continuum damage mechanics and its engineering applications. This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook. The book consists of two parts and an appendix. Part I is concerned with the foundation of continuum damage mechanics. Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2. In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application to the modeling of the constitutive and the evolution equations of damaged materials are descried as a systematic basis for the subsequent development throughout the book. Part II describes the application of the fundamental theories developed in Part I to typical damage and fracture problems encountered in various fields of the current engineering. Important engineering aspects of elastic-plastic or ductile damage, their damage mechanics modeling and their further refinement are first discussed in Chapter 6. Chapters 7 and 8 are concerned with the modeling of fatigue, creep, creep-fatigue and their engineering application. Damage mechanics modeling of complicated crack closure behavior in elastic-brittle and composite materials are discussed in Chapters 9 and 10. In Chapter 11, applicability of the local approach to fracture by means of damage mechanics and finite element method, and the ensuing mathematical and numerical problems are briefly discussed. A proper understanding of the subject matter requires knowledge of tensor algebra and tensor calculus. At the end of this book, therefore, the foundations of tensor analysis are presented in the Appendix, especially for readers with insufficient mathematical background, but with keen interest in this exciting field of mechanics.
Download or read book Fracture Mechanics written by Dietmar Gross and published by Springer Science & Business Media. This book was released on 2011-07-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: - self-contained and well illustrated - complete and comprehensive derivation of mechanical/mathematical results with enphasis on issues of practical importance - combines classical subjects of fracture mechanics with modern topics such as microheterogeneous materials, piezoelectric materials, thin films, damage - mechanically and mathematically clear and complete derivations of results
Download or read book Introduction to continuum damage mechanics written by L. Kachanov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.
Download or read book Fracture Mechanics written by Dietmar Gross and published by Springer Science & Business Media. This book was released on 2007-05-23 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: - self-contained and well illustrated - complete and comprehensive derivation of mechanical/mathematical results with enphasis on issues of practical importance - combines classical subjects of fracture mechanics with modern topics such as microheterogeneous materials, piezoelectric materials, thin films, damage - mechanically and mathematically clear and complete derivations of results
Download or read book Introduction to Fracture Mechanics written by Robert O. Ritchie and published by Elsevier. This book was released on 2021-06-23 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fracture Mechanics presents an introduction to the origins, formulation and application of fracture mechanics for the design, safe operation and life prediction in structural materials and components. The book introduces and informs the reader on how fracture mechanics works and how it is so different from other forms of analysis that are used to characterize mechanical properties. Chapters cover foundational topics and the use of linear-elastic fracture mechanics, involving both K-based characterizing parameter and G-based energy approaches, and how to characterize the fracture toughness of materials under plane-strain and non plane-strain conditions using the notion of crack-resistance or R-curves. Other sections cover far more complex nonlinear-elastic fracture mechanics based on the use of the J-integral and the crack-tip opening displacement. These topics largely involve continuum mechanics descriptions of crack initiation, slow crack growth, eventual instability by overload fracture, and subcritical cracking. Presents how, for a given material, a fracture toughness value can be measured on a small laboratory sample and then used directly to predict the failure (by fracture, fatigue, creep, etc.) of a much larger structure in service Covers the rudiments of fracture mechanics from the perspective of the philosophy underlying the few principles and the many assumptions that form the basis of the discipline Provides readers with a "working knowledge" of fracture mechanics, describing its potency for damage-tolerant design, for preventing failures through appropriate life-prediction strategies, and for quantitative failure analysis (fracture diagnostics)
Download or read book A Practical Approach to Fracture Mechanics written by Jorge Luis González-Velázquez and published by Elsevier. This book was released on 2020-10-08 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Approach to Fracture Mechanics provides a concise overview on the fundamental concepts of fracture mechanics, discussing linear elastic fracture mechanics, fracture toughness, ductile fracture, slow crack propagation, structural integrity, and more. The book outlines analytical and experimental methods for determining the fracture resistance of mechanical and structural components, also demonstrating the use of fracture mechanics in failure analysis, reinforcement of cracked structures, and remaining life estimation. The characteristics of crack propagation induced by fatigue, stress-corrosion, creep, and absorbed hydrogen are also discussed. The book concludes with a chapter on the structural integrity analysis of cracked components alongside a real integrity assessment. This book will be especially useful for students in mechanical, civil, industrial, metallurgical, aeronautical and chemical engineering, and for professional engineers looking for a refresher on core principles. Concisely outlines the underlying fundamentals of fracture mechanics, making physical concepts clear and simple and providing easily-understood applied examples Includes solved problems of the most common calculations, along with step-by-step procedures to perform widely-used methods in fracture mechanics Demonstrates how to determine stress intensity factors and fracture toughness, estimate crack growth rate, calculate failure load, and other methods and techniques
Download or read book The Practical Use of Fracture Mechanics written by D. Broek and published by Springer. This book was released on 1988-10-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the use of fracture mechanics for the solution of practical problems; academic rigor is not at issue and dealt with only in as far as it improves insight and understanding; it often concerns secondary errors in engineering. Knowledge of (ignorance of) such basic input as loads and stresses in practical cases may cause errors far overshadowing those introduced by shortcomings of fracture mechanics and necessary approximations; this is amply demonstrated in the text. I have presented more than three dozen 40-hour courses on fracture mechanics and damage tolerance analysis, so that I have probably more experience in teaching the subject than anyone else. I learned more than the students, and became cognizant of difficulties and of the real concerns in applications. In particular I found, how a subject should be explained to appeal to the practicing engineer to demonstrate that his practical problem can indeed be solved with engineering methods. This experience is reflected in the presenta tions in this book. Sufficient background is provided for an understanding of the issues, but pragamatism prevails. Mathematics cannot be avoided, but they are presented in a way that appeals to insight and intuition, in lieu of formal derivations which would show but the mathematical skill of the writer.
Download or read book Application of Fracture Mechanics to Cementitious Composites written by S.P. Shah and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland cement concrete is a relatively brittle material. As a result, mechanical behavior of concrete, conventionally reinforced concrete, prestressed concrete, and fiber reinforced concrete is critically influenced by crack propagation. It is, thus, not surprising that attempts are being made to apply the concepts of fracture mechanics to quantify the resistance to cracking in cementious composites. The field of fracture mechanics originated in the 1920's with A. A. Griffith's work on fracture of brittle materials such as glass. Its most significant applications, however, have been for controlling brittle fracture and fatigue failure of metallic structures such as pressure vessels, airplanes, ships and pipe lines. Considerable development has occurred in the last twenty years in modifying Griffith's ideas or in proposing new concepts to account for the ductility typical of metals. As a result of these efforts, standard testing techniques have been available to obtain fracture parameters for metals, and design based on these parameters are included in relevant specifications. Many attempts have been made, in the last two decades or so, to apply the fracture mechanics concepts to cement, mortar, con crete and reinforced concrete. So far, these attempts have not led to a unique set of material parameters which can quantify the resistance of these cementitious composites to fracture. No standard testing methods and a generally accepted theoretical analysis are established for concrete as they are for metals.
Download or read book The Practical Use of Fracture Mechanics written by D. Broek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the use of fracture mechanics for the solution of practical problems; academic rigor is not at issue and dealt with only in as far as it improves insight and understanding; it often concerns secondary errors in engineering. Knowledge of (ignorance of) such basic input as loads and stresses in practical cases may cause errors far overshadowing those introduced by shortcomings of fracture mechanics and necessary approximations; this is amply demonstrated in the text. I have presented more than three dozen 40-hour courses on fracture mechanics and damage tolerance analysis, so that I have probably more experience in teaching the subject than anyone else. I learned more than the students, and became cognizant of difficulties and of the real concerns in applications. In particular I found, how a subject should be explained to appeal to the practicing engineer to demonstrate that his practical problem can indeed be solved with engineering methods. This experience is reflected in the presenta tions in this book. Sufficient background is provided for an understanding of the issues, but pragamatism prevails. Mathematics cannot be avoided, but they are presented in a way that appeals to insight and intuition, in lieu of formal derivations which would show but the mathematical skill of the writer.
Download or read book Engineering Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting his major contributions to the field, Jean Lemaitre’s "Engineering Damage Mechanics" presents simplified and advanced methods organized within a unified framework for designers of any mechanical component. Explains how to apply continuous damage mechanics to failures of mechanical and civil engineering components in ductile, creep, fatigue and brittle conditions. Incorporates many basic examples, while emphasizing key practical considerations such as material parameter identification, and provides perspective on the advantage and disadvantages of various approaches.
Download or read book Fundamentals of Fracture Mechanics written by John Frederick Knott and published by Gruppo Italiano Frattura. This book was released on 1973 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Fracture of Composite Materials and Structures written by Mohd Nasir Tamin and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent research findings on fracture properties and behavior of the composites, and their damage and cracking process under both quasi-static and impact loading conditions. Theoretical treatment, experimental investigation and numerical simulation aspects of the mechanics of composites, including sandwich structures are included.
Download or read book Mechanical damage and crack growth in concrete written by Alberto Carpinteri and published by Springer. This book was released on 2011-09-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following Volumes III and IV that dealt with the fracture mechanics of concrete emphasizing both material testing and structural application in general, it was felt that specimen size and loading rate effects for concrete require further attention. The only criterion that has thus far successfully linearized the highly nonlinear crack growth data of concrete is the strain energy density theory. In particular, the crack growth resistance curves plotting the strain energy density factor versus crack growth known as the SR·curves are straight lines as specimen size and loading steps or rates are altered. This allows the extrapolation of data and provides a useful design methodology. This book is unique in that it is devoted specifically to the application of the strain energy density theory to civil engineering structural members made of concrete. Analyzed in detail is the strain softening behavior of concrete for a variety of different components including the influence of steel reinforcement. Permanent damage of the material is accounted for each increment of loading by invoking the mechanism of elastic unloading. This assumption is justified in concrete structures where the effective stiffness depends primarily on the crack growth rate and load history. Crack growth data are presented in terms of SR-curves with emphases placed on scaling specimen size which alone can change the mode of failure from plastic collapse to brittle fracture. Loading rate effects can also be scaled to control failure by yielding and fracture.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer. This book was released on 2009-08-12 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
