Download or read book Cyclopaedia of Useful Arts Mechanical and Chemical Manufactures Mining and Engineering Lac to Zirconium written by Charles Tomlinson and published by . This book was released on 1866 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclopaedia of Useful Arts Mechanical and Chemical Manufactures Mining and Engineering Hammer to Zirconium written by Charles Tomlinson and published by . This book was released on 1862 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.
Download or read book Frontiers in Chemical Engineering written by National Research Council and published by National Academies Press. This book was released on 1988-02-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the next 10 to 15 years, chemical engineers have the potential to affect every aspect of American life and promote the scientific and industrial leadership of the United States. Frontiers in Chemical Engineering explores the opportunities available and gives a blueprint for turning a multitude of promising visions into realities. It also examines the likely changes in how chemical engineers will be educated and take their place in the profession, and presents new research opportunities.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book Mechanochemistry in Nanoscience and Minerals Engineering written by Peter Balaz and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemistry as a branch of solid state chemistry enquires into processes which proceed in solids due to the application of mechanical energy. This provides a thorough, up to date overview of mechanochemistry of solids and minerals. Applications of mechanochemistry in nanoscience with special impact on nanogeoscience are described. Selected advanced identification methods, most frequently applied in nanoscience, are described as well as the advantage of mechanochemical approach in minerals engineering. Examples of industrial applications are given. Mechanochemical technology is being applied in many industrial fields: powder metallurgy (synthesis of nanometals, alloys and nanocompounds), building industry (activation of cements), chemical industry (solid waste treatment, catalyst synthesis, coal ashes utilization), minerals engineering (ore enrichment, enhancement of processes of extractive metallurgy), agriculture industry (solubility increase of fertilizers), and pharmaceutical industry (improvement of solubility and bioavailability of drugs). This reference serves as an introduction to newcomers to mechanochemistry, and encourages more experienced researchers to broaden their knowledge and discover novel applications in the field.
Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.
Download or read book Color for Science Art and Technology written by Kurt Nassau and published by Elsevier. This book was released on 1997-12-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to assemble a series of chapters, written by experts in their fields, covering the basics of color - and then some more. In this way, readers are supplied with almost anything they want to know about color outside their own area of expertise. Thus, the color measurement expert, as well as the general reader, can find here information on the perception, causes, and uses of color. For the artist there are details on the causes, measurement, perception, and reproduction of color. Within each chapter, authors were requested to indicate directions of future efforts, where applicable. One might reasonably expect that all would have been learned about color in the more than three hundred years since Newton established the fundamentals of color science. This is not true because:• the measurement of color still has unresolved complexities (Chapter 2)• many of the fine details of color vision remain unknown (Chapter 3)• every few decades a new movement in art discovers original ways to use new pigments, and dyes continue to be discovered (Chapter 5)• the philosophical approach to color has not yet crystallized (Chapter 7)• new pigments and dyes continue to be discovered (Chapters 10 and 11)• the study of the biological and therapeutic effects of color is still in its infancy (Chapter 2).Color continues to develop towards maturity and the editor believes that there is much common ground between the sciences and the arts and that color is a major connecting bridge.
Download or read book Facing the Heat Barrier written by T.A. Heppenheimer and published by Courier Dover Publications. This book was released on 2018-09-12 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from The NASA History Series presents an overview of the science of hypersonics, the study of flight at speeds at which the physics of flows is dominated by aerodynamic heating. The survey begins during the years immediately following World War II, with the first steps in hypersonic research: the development of missile nose cones and the X-15; the earliest concepts of hypersonic propulsion; and the origin of the scramjet engine. Next, it addresses the re-entry problem, which came to the forefront during the mid-1950s, showing how work in this area supported the manned space program and contributed to the development of the orbital shuttle. Subsequent chapters explore the fading of scramjet studies and the rise of the National Aerospace Plane (NASP) program of 1985–95, which sought to lay groundwork for single-stage vehicles. The program's ultimate shortcomings — in terms of aerodynamics, propulsion, and materials — are discussed, and the book concludes with a look at hypersonics in the post-NASP era, including the development of the X-33 and X-34 launch vehicles, further uses for scramjets, and advances in fluid mechanics. Clearly, ongoing research in hypersonics has yet to reach its full potential, and readers with an interest in aeronautics and astronautics will find this book a fascinating exploration of the field's history and future.
Download or read book ACS Style Guide written by Anne M. Coghill and published by American Chemical Society. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the time since the second edition of The ACS Style Guide was published, the rapid growth of electronic communication has dramatically changed the scientific, technical, and medical (STM) publication world. This dynamic mode of dissemination is enabling scientists, engineers, and medicalpractitioners all over the world to obtain and transmit information quickly and easily. An essential constant in this changing environment is the requirement that information remain accurate, clear, unambiguous, and ethically sound.This extensive revision of The ACS Style Guide thoroughly examines electronic tools now available to assist STM writers in preparing manuscripts and communicating with publishers. Valuable updates include discussions of markup languages, citation of electronic sources, online submission ofmanuscripts, and preparation of figures, tables, and structures. In keeping current with the changing environment, this edition also contains references to many resources on the internet.With this wealth of new information, The ACS Style Guide's Third Edition continues its long tradition of providing invaluable insight on ethics in scientific communication, the editorial process, copyright, conventions in chemistry, grammar, punctuation, spelling, and writing style for any STMauthor, reviewer, or editor. The Third Edition is the definitive source for all information needed to write, review, submit, and edit scholarly and scientific manuscripts.
Download or read book Handbook of Nanomaterials for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-07-19 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials for Industrial Applications explores the use of novel nanomaterials in the industrial arena. The book covers nanomaterials and the techniques that can play vital roles in many industrial procedures, such as increasing sensitivity, magnifying precision and improving production limits. In addition, the book stresses that these approaches tend to provide green, sustainable solutions for industrial developments. Finally, the legal, economical and toxicity aspects of nanomaterials are covered in detail, making this is a comprehensive, important resource for anyone wanting to learn more about how nanomaterials are changing the way we create products in modern industry. - Demonstrates how cutting-edge developments in nanomaterials translate into real-world innovations in a range of industry sectors - Explores how using nanomaterials can help engineers to create innovative consumer products - Discusses the legal, economical and toxicity issues arising from the industrial applications of nanomaterials
Download or read book Standards Yearbook written by and published by . This book was released on 1928 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.
Download or read book Metal Matrix Composites in Industry written by Alexander Evans and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites are making tangible inroads into the "real" world of engineering. They are used in engineering components such as brake rotors, aircraft parts, combustion engines, and heat sinks for electronic systems. Yet, outside a relatively limited circle of specialists, these materials are mostly unknown. Designers do not as a rule think of using these materials, in part because access to information is difficult as these materials have not really entered engineering handbooks. Metal Matrix Composites in Industry is thus useful to engineers who wish to gain introductory knowledge of these materials and who want to know where "to find" them. Additionally, it provides researchers and academics with a survey of current industrial activity in this area of technology.
Download or read book Critical Metals Handbook written by Gus Gunn and published by John Wiley & Sons. This book was released on 2014-01-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind is using a greater variety of metals in greater quantities than ever before. As a result there is increasing global concern over the long-term availability of secure and adequate supplies of the metals needed by society. Critical metals, which are those of growing economic importance that might be susceptible to future scarcity, are a particular worry. For many of these we have little information on how they are concentrated in the Earth’s crust, how to extract them from their ores, and how to use, recycle and dispose of them effectively and safely. Published with the British Geological Survey, the Critical Metals Handbook brings together a wealth of knowledge on critical metals and provides a foundation for improving the future security and sustainability of critical metal supplies. Written by international experts, it provides a unique source of authoritative information on diverse aspects of the critical metals, including geology, deposits, processing, applications, recycling, environmental issues and markets. It is aimed at a broad non-specialist audience, including professionals and academics working in the exploration and mining sectors, in mining finance and investment, and in mineral processing and manufacturing. It will also be a valuable reference for policy makers concerned with resource management, land-use planning, eco-efficiency, recycling and related fields.
Download or read book The Chemistry of Pigments written by Ernest J. Parry and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
