Download or read book Cutting Tool Material Selection written by Haldon J. Swinehart and published by . This book was released on 1968 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.

Download or read book Material Selection in Mechanical Design of Cutting Tools written by Mohamad Fauzi Rosly and published by . This book was released on 2009 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis was carried out as a study of Material selection in mechanical design of cutting tool The objectives of this study are to perform material selection process for find the best material that can be use as cutting tools material, compare the alternative method with conventional method and use Computer-aided selection software (CES) to find the best process for cutting tools manufacturing. Weighted property method as alternative method and cost per unit property method as conventional method was performing for finding the suitable material for cutting tools. The material selected from these two methods was compared to find the best selected material. Before performing weighted property method, material performance index, M, was finding first. To finding the materials performance index, M, derivation of basic formula like stiffness and cross section must perform first. Function of materials performance index, M, was plotted on the Young's modulus - density chart and wear rate- hardness chart. In cost per unit property method, the best material was selected based on the smaller value of cost per unit property. After selection by using cost per unit property has done, weighted properties method was performing. The material selection is making by referring to the performance index. The highest value of performance index represents the best material for cutting tools. Lastly, computer Aided selection process was used to find the suitable manufacturing process for selected material.

Download or read book Cutting Tool Applications written by George Schneider (Jr.) and published by . This book was released on 2002 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ceramic Cutting Tools written by E. Dow Whitney and published by William Andrew. This book was released on 2012-12-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in ceramics as a high speed cutting tool material is based primarily on favorable material properties. As a class of materials, ceramics possess high melting points, excellent hardness and good wear resistance. Unlike most metals, hardness levels in ceramics generally remain high at elevated temperatures which means that cutting tip integrity is relatively unaffected at high cutting speeds. Ceramics are also chemically inert against most workmetals.

Download or read book Cutting Tool Material Selection written by and published by . This book was released on 1977 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Cutting written by Edward M. Trent and published by Elsevier. This book was released on 2015-06-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to include changes and additions to metal cutting theory. Covers developments in tool materials and industrial practice over the last seven years. Describes the stresses and temperatures acting on cutting tools and explains theirinfluence on performance. Discusses tool wear which determines cutting efficiency. Details machinability and control of tool material structure and composition.

Download or read book Cutting Tool Materials written by and published by . This book was released on 1988 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals in einem Band werden Werkstoffe hier (in zwei getrennten Systemen) sowohl nach ihrer technischen Anwendung als auch nach ihren Eigenschaften geordnet. - Benutzer können deshalb zunächst nach der Gruppe von Materialen suchen, die für eine spezielle Anwendung geeignet sind, und anschließend Details über jedes einzelne Material finden - Suchkriterien sind Eigenschaften wie Wärmeleitfähigkeit, optisches Reflexionsvermögen, Elastizität usw. und Anwendungsgebiete wie Bauwesen, Biomedizin, Fahrzeugbau, Luftfahrttechnik, Elektrotechnik usw. - berücksichtigt werden sowohl herkömmliche Werkstoffe (Eisen- und Nichteisenmetalle, Kunststoffe, Klebstoffe) als auch Kompositwerkstoffe und synthetische Materialen wie Laminate, Fasern und Keramiken

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2016-04-06 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.

Download or read book MANUFACTURING PROCESSES 4 5 PRODUCT ID 23994334 written by LAMNGEUN. VIRASAK and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Processes 1 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series on manufacturing processes for engineers is a reference work for scientific and industrial experts. This volume on Turning, Milling and Drilling starts from the basic principles of machining with geometrically defined cutting edges based on a common active principle. In addition, appropriate tool designs as well as the reasonable use of cutting material are presented. A detailed chapter about the machinability of the most important workpiece materials, such as steel and cast iron, light metal alloys and high temperature resistant materials imparts a broad knowledge of the interrelations between workpiece materials, cutting materials and process parameters. This book is in the RWTHedition Series as are the other four volumes of the reference work.

Download or read book Geometry of Single point Turning Tools and Drills written by Viktor P. Astakhov and published by Springer Science & Business Media. This book was released on 2010-07-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometry of Single-Point Turning Tools and Drills outlines clear objectives of cutting tool geometry selection and optimization, using multiple examples to provide a thorough explanation. It addresses several urgent problems that many present-day tool manufacturers, tool application specialists, and tool users, are facing. It is both a practical guide, offering useful, practical suggestions for the solution of common problems, and a useful reference on the most important aspects of cutting tool design, application, and troubleshooting practices. Covering emerging trends in cutting tool design, cutting tool geometry, machining regimes, and optimization of machining operations, Geometry of Single-Point Turning Tools and Drills is an indispensable source of information for tool designers, manufacturing engineers, research workers, and students.

Download or read book Machinability of Engineering Materials written by B. Mills and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus, there will continue to be a requirement for the development of improved cutting tool materials, workpiece materials, cutting fluids and testing methods; collectively this activity can be described as improving machinability. Machinability is a parameter which in many ways is vague, sometimes qualitative and very often misunderstood. The purpose of this text is to give a broad understanding of the concept, methods of assessment and ways of improving machinability to the manufacturing engineer, the metallurgist and the materials scientist. The text should also be of interest to those engaged in research in manufacturing engineering and metal cutting. The text, of necessity, does not attempt to give detailed information about the machining characteristics of a wide range of tool and workpiece materials. It is felt that this is beyond the scope of the book and is best left to other sources, such as machinability data banks and the Machining Handbook*, whose main objective is to present this kind of information. It is hoped that the reader will be able to progress logically from the fundamental aspects of the metal cutting process to the sections on the more specific topics of machinability including machinability testing and the properties of tool and workpiece materials which affect their machining performance.

Download or read book Cutting Tool Technology written by Graham T. Smith and published by Springer Science & Business Media. This book was released on 2008-07-03 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a well acknowledged fact that virtually all of our modern-day components and assemblies rely to some extent on machining operations in their manufacturing process. Thus, there is clearly a substantive machining requirement which will continue to be of prime importance for the foreseeable future. Cutting Tool Technology provides a comprehensive guide to the latest developments in the use of cutting tool technology. The book covers new machining and tooling topics such as high-speed and hard-part machining, near-dry and dry-machining strategies, multi-functional tooling, ‘diamond-like’ and ‘atomically-modified’ coatings, plus many others. Also covered are subjects important from a research perspective, such as micro-machining and artificial intelligence coupled to neural network tool condition monitoring. A practical handbook complete with troubleshooting tables for common problems, Cutting Tool Technology is an invaluable reference for researchers, manufacturers and users of cutting tools.

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.

Download or read book Modeling and Simulation for Material Selection and Mechanical Design written by George E. Totten and published by CRC Press. This book was released on 2003-12-02 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. Written by internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.