Download or read book Fitting Models to Biological Data Using Linear and Nonlinear Regression written by Harvey Motulsky and published by Oxford University Press. This book was released on 2004-05-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most biologists use nonlinear regression more than any other statistical technique, but there are very few places to learn about curve-fitting. This book, by the author of the very successful Intuitive Biostatistics, addresses this relatively focused need of an extraordinarily broad range of scientists.
Download or read book Numerical Methods for Engineers and Scientists Using MATLAB written by Ramin S. Esfandiari and published by CRC Press. This book was released on 2017-04-25 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a pragmatic, methodical and easy-to-follow presentation of numerical methods and their effective implementation using MATLAB, which is introduced at the outset. The author introduces techniques for solving equations of a single variable and systems of equations, followed by curve fitting and interpolation of data. The book also provides detailed coverage of numerical differentiation and integration, as well as numerical solutions of initial-value and boundary-value problems. The author then presents the numerical solution of the matrix eigenvalue problem, which entails approximation of a few or all eigenvalues of a matrix. The last chapter is devoted to numerical solutions of partial differential equations that arise in engineering and science. Each method is accompanied by at least one fully worked-out example showing essential details involved in preliminary hand calculations, as well as computations in MATLAB.
Download or read book Basics of MATLAB written by Dr. Mukesh Tiwari, Dr. Jaikaran Singh and published by Nitya Publications. This book was released on 2020-01-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB stands for Matrix Laboratory. It is a term used in technical computing of high efficiency. Cleve Molar of MathWorks.Inc built this system in 1984. In 1984. It's in the C, C++, and Java. It permits matrix manipulation, function detection, algorithm implementation, and user interface design.
Download or read book Modeling of Curves and Surfaces with MATLAB written by Vladimir Rovenski and published by Springer Science & Business Media. This book was released on 2010-06-10 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on geometry is devoted to various central geometrical topics including: graphs of functions, transformations, (non-)Euclidean geometries, curves and surfaces as well as their applications in a variety of disciplines. This book presents elementary methods for analytical modeling and demonstrates the potential for symbolic computational tools to support the development of analytical solutions. The author systematically examines several powerful tools of MATLAB® including 2D and 3D animation of geometric images with shadows and colors and transformations using matrices. With over 150 stimulating exercises and problems, this text integrates traditional differential and non-Euclidean geometries with more current computer systems in a practical and user-friendly format. This text is an excellent classroom resource or self-study reference for undergraduate students in a variety of disciplines.
Download or read book Applied Numerical Methods Using MATLAB written by R. V. Dukkipati and published by Mercury Learning and Information. This book was released on 2023-03-09 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to cover all major aspects of applied numerical methods, including numerical computations, solution of algebraic and transcendental equations, finite differences and interpolation, curve fitting, correlation and regression, numerical differentiation and integration, matrices and linear system of equations, numerical solution of ordinary differential equations, and numerical solution of partial differential equations. MATLAB is incorporated throughout the text and most of the problems are executed in MATLAB code. It uses a numerical problem-solving orientation with numerous examples, figures, and end of chapter exercises. Presentations are limited to very basic topics to serve as an introduction to more advanced topics. FEATURES: Integrates MATLAB throughout the text Includes over 600 fully-solved problems with step-by-step solutions Limits presentations to basic concepts of solving numerical methods
Download or read book EBOOK Applied Numerical Methods with MATLAB for Engineers and Scientists written by Steven Chapra and published by McGraw Hill. This book was released on 2011-05-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steven Chapra’s Applied Numerical Methods with MATLAB, third edition, is written for engineering and science students who need to learn numerical problem solving. Theory is introduced to inform key concepts which are framed in applications and demonstrated using MATLAB. The book is designed for a one-semester or one-quarter course in numerical methods typically taken by undergraduates. The third edition features new chapters on Eigenvalues and Fourier Analysis and is accompanied by an extensive set of m-files and instructor materials.
Download or read book EBOOK Applied Numerical Methods with MatLab written by CHAPRA and published by McGraw Hill. This book was released on 2018-03-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: EBOOK: Applied Numerical Methods with MatLab
Download or read book Computational Methods in Engineering written by S. P. Venkateshan and published by Springer Nature. This book was released on 2023-05-31 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to graduate and upper-undergraduate students enrolled in mechanical engineering. The book attempts to make students with mathematical backgrounds comfortable with numerical methods. The book also serves as a handy reference for practicing engineers who are interested in applications. The book is written in an easy-to-understand manner, with the essence of each numerical method clearly stated. This makes it easy for professional engineers, students, and early career researchers to follow the material presented in the book. The structure of the book has been modeled accordingly. It is divided into four modules: i) solution of a system of equations and eigenvalues which includes linear equations, determining eigenvalues, and solution of nonlinear equations; ii) function approximations: interpolation, data fit, numerical differentiation, and numerical integration; iii) solution of ordinary differential equations—initial value problems and boundary value problems; and iv) solution of partial differential equations—parabolic, elliptic, and hyperbolic PDEs. Each section of the book includes exercises to reinforce the concepts, and problems have been added at the end of each chapter. Exercise problems may be solved by using computational tools such as scientific calculators, spreadsheet programs, and MATLAB codes. The detailed coverage and pedagogical tools make this an ideal textbook for students, early career researchers, and professionals.
Download or read book Scientific Computing with MATLAB written by Dingyu Xue and published by CRC Press. This book was released on 2016-02-17 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Computing with MATLAB®, Second Edition improves students’ ability to tackle mathematical problems. It helps students understand the mathematical background and find reliable and accurate solutions to mathematical problems with the use of MATLAB, avoiding the tedious and complex technical details of mathematics. This edition retains the structure of its predecessor while expanding and updating the content of each chapter. The book bridges the gap between problems and solutions through well-grouped topics and clear MATLAB example scripts and reproducible MATLAB-generated plots. Students can effortlessly experiment with the scripts for a deep, hands-on exploration. Each chapter also includes a set of problems to strengthen understanding of the material.
Download or read book An Introduction to Numerical Methods Using MATLAB written by K. Akbar Ansari and published by SDC Publications. This book was released on 2019 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Numerical Methods using MATLAB is designed to be used in any introductory level numerical methods course. It provides excellent coverage of numerical methods while simultaneously demonstrating the general applicability of MATLAB to problem solving. This textbook also provides a reliable source of reference material to practicing engineers, scientists, and students in other junior and senior-level courses where MATLAB can be effectively utilized as a software tool in problem solving. The principal goal of this book is to furnish the background needed to generate numerical solutions to a variety of problems. Specific applications involving root-finding, interpolation, curve-fitting, matrices, derivatives, integrals and differential equations are discussed and the broad applicability of MATLAB demonstrated. This book employs MATLAB as the software and programming environment and provides the user with powerful tools in the solution of numerical problems. Although this book is not meant to be an exhaustive treatise on MATLAB, MATLAB solutions to problems are systematically developed and included throughout the book. MATLAB files and scripts are generated, and examples showing the applicability and use of MATLAB are presented throughout the book. Wherever appropriate, the use of MATLAB functions offering shortcuts and alternatives to otherwise long and tedious numerical solutions is also demonstrated. At the end of every chapter a set of problems is included covering the material presented. A solutions manual to these exercises is available to instructors.
Download or read book Numerical Methods Fundament PB written by R.V. Dukkipati and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-06-13 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to cover all major aspects of applied numerical methods, including numerical computations, solution of algebraic and transcendental equations, finite differences and interpolation, curve fitting, correlation and regression, numerical differentiation and integration, matrices and linear system of equations, numerical solution of ordinary differential equations, and numerical solution of partial differentialequations. It uses a numerical problem-solving orientation with numerous examples, figures, and end of chapter exercises. Presentations are limited to very basic topics to serve as an introduction to more advanced topics. FEATURES: Emphasizes applications, analytical developments, algorithms, and computational solutions over puretheory Features over 300 problems with step-by-step solutions Includes a review of basic engineering mathematics and partial fraction expansions Provides an understanding, both physical and mathematical, of the basic theory ofnumerical analysis, methods, and their applications
Download or read book Computer Methods for Engineering with MATLAB Applications Second Edition written by Yogesh Jaluria and published by CRC Press. This book was released on 2011-09-08 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantially revised and updated, Computer Methods for Engineering with MATLAB® Applications, Second Edition presents equations to describe engineering processes and systems. It includes computer methods for solving these equations and discusses the nature and validity of the numerical results for a variety of engineering problems. This edition now uses MATLAB in its discussions of computer solution. New to the Second Edition Recent advances in computational software and hardware A large number of MATLAB commands and programs for solving exercises and to encourage students to develop their own computer programs for specific problems Additional exercises and examples in all chapters New and updated references The text follows a systematic approach for obtaining physically realistic, valid, and accurate results through numerical modeling. It employs examples from many engineering areas to explain the elements involved in the numerical solution and make the presentation relevant and interesting. It also incorporates a wealth of solved exercises to supplement the discussion and illustrate the ideas and methods presented. The book shows how a computational approach can provide physical insight and obtain inputs for the analysis and design of practical engineering systems.
Download or read book Hydroinformatics written by Praveen Kumar and published by CRC Press. This book was released on 2005-11-02 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern hydrology is more interdisciplinary than ever. Staggering amounts and varieties of information pour in from GIS and remote sensing systems every day, and this information must be collected, interpreted, and shared efficiently. Hydroinformatics: Data Integrative Approaches in Computation, Analysis, and Modeling introduces the tools, approache
Download or read book Introduction to Modeling and Simulation with MATLAB and Python written by Steven I. Gordon and published by CRC Press. This book was released on 2017-07-12 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Modeling and Simulation with MATLAB and Python is intended for students and professionals in science, social science, and engineering that wish to learn the principles of computer modeling, as well as basic programming skills. The book content focuses on meeting a set of basic modeling and simulation competencies that were developed as part of several National Science Foundation grants. Even though computer science students are much more expert programmers, they are not often given the opportunity to see how those skills are being applied to solve complex science and engineering problems and may also not be aware of the libraries used by scientists to create those models. The book interleaves chapters on modeling concepts and related exercises with programming concepts and exercises. The authors start with an introduction to modeling and its importance to current practices in the sciences and engineering. They introduce each of the programming environments and the syntax used to represent variables and compute mathematical equations and functions. As students gain more programming expertise, the authors return to modeling concepts, providing starting code for a variety of exercises where students add additional code to solve the problem and provide an analysis of the outcomes. In this way, the book builds both modeling and programming expertise with a "just-in-time" approach so that by the end of the book, students can take on relatively simple modeling example on their own. Each chapter is supplemented with references to additional reading, tutorials, and exercises that guide students to additional help and allows them to practice both their programming and analytical modeling skills. In addition, each of the programming related chapters is divided into two parts – one for MATLAB and one for Python. In these chapters, the authors also refer to additional online tutorials that students can use if they are having difficulty with any of the topics. The book culminates with a set of final project exercise suggestions that incorporate both the modeling and programming skills provided in the rest of the volume. Those projects could be undertaken by individuals or small groups of students. The companion website at http://www.intromodeling.com provides updates to instructions when there are substantial changes in software versions, as well as electronic copies of exercises and the related code. The website also offers a space where people can suggest additional projects they are willing to share as well as comments on the existing projects and exercises throughout the book. Solutions and lecture notes will also be available for qualifying instructors.
Download or read book The Indirect Estimation of Migration written by Andrei Rogers and published by Springer Science & Business Media. This book was released on 2010-07-03 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the culmination of our collaborative research, going back over 15 years (Rogers & Little, 1994), and for one of us, even longer (Rogers, 1967, 1973). It addresses a dif?cult, yet necessary, area of demographic research: what to do in data situations characterized by irregular, inadequate, or missing data. A common solution within the demographic community has been what is generally referred to as “indirect estimation”. In our work the focus has been on the indirect estimation of migration, and our use of the term “indirect” follows the description given in the 1983 United Nations manual, which de?ned it as “techniques suited for analysis of incomplete or defective demographic data” (United Nations, 1983, p. 1). We wrote this book with a goal to make it accessible to a reader familiar with introductory statistical modeling, at the level of regression and categorical data an- ysis using log – linear models. It is primarily intended to serve as a reference work for demographers, sociologists, geographers, economists, and regional planners.
Download or read book Basics of MATLAB Programming written by R. Balaji and published by Notion Press. This book was released on 2020-09-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of ‘Basics of MATLAB Programming’ offers a brief glimpse of the power and flexibility of MATLAB. This book is intended to assist undergraduates with learning in programming, specifically in MATLAB. The MATLAB codes are given in Courier New font [MATLAB font] to get the feel of MATLAB environment. It combines engineering mathematics with MATLAB. This book has around ten chapters comprising Arrays, Functions, Control statements, Plotting, Simulink and other miscellaneous concepts. It consists of many real-life examples which help in better understanding of MATLAB.
Download or read book Sliding Base Structures written by Hong-Song Hu and published by Springer Nature. This book was released on 2023-08-11 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is an efficient and economic approach for mitigating the seismic damage of low-rise buildings. This book presents various aspects of SB structures, including their fundamentals, dynamic analysis procedures, seismic response characteristics, design methods, and practical applications. It contains a comprehensive study on the influence of various structural and ground motion characteristics on the responses of SB structures, which is particularly helpful for the readers to fully understand the behavior of SB structures. Researchers and engineers in the field of structural engineering and earthquake engineering will benefit from this book.
