Download or read book Current Technologies in Vehicular Communication written by George Dimitrakopoulos and published by Springer. This book was released on 2016-11-13 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and comprehensive overview of vehicular communication technologies. It classifies all relevant standards, protocols and applications, so as to enable the reader to gain a holistic approach towards the subject of vehicular communications. The primary methods are algorithmic processes and simulation results.First, an overview and classification of vehicular technologies is presented. Then, the book focuses on specific applications of V2V and V2I communications. Special attention is given to recent research and development results regarding R&D projects in the field, in cooperation with car manufacturing companies and universities at a global level.Designed to facilitate understanding of vehicle to vehicle and vehicle to infrastructure technologies, this textbook is appropriate for undergraduate and graduate students of vehicular communications or mobile networks.

Download or read book VANET written by Hannes Hartenstein and published by John Wiley & Sons. This book was released on 2009-11-04 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an invaluable introduction to inter-vehicular communications, demonstrating the networking and communication technologies for reducing fatalities, improving transportation efficiency, and minimising environmental impact. This book addresses the applications and technical aspects of radio-based vehicle-to-vehicle and vehicle-to-infrastructure communication that can be established by short- and medium range communication based on wireless local area network technology (primarily IEEE 802.11). It contains a coherent treatment of the important topics and technologies contributed by leading experts in the field, covering the potential applications for and their requirements on the communications system. The authors cover physical and medium access control layer issues with focus on IEEE 802.11-based systems, and show how many of the applications benefit when information is efficiently disseminated, and the techniques that provide attractive data aggregation (also includes design of the corresponding middleware). The book also considers issues such as IT-security (means and fundamental trade-off between security and privacy), current standardization activities such as IEEE 802.11p, and the IEEE 1609 standard series. Key Features: Covers the state-of-the-art in the field of vehicular inter-networks such as safety and efficiency applications, physical and medium access control layer issues, middleware, and security Shows how vehicular networks differ from other mobile networks and illustrates the idea of vehicle-to-vehicle communications with application scenarios and with current proofs of concept worldwide Addresses current standardization activities such as IEEE 802.11p and the IEEE 1609 standard series Offers a chapter on mobility models and their use for simulation of vehicular inter-networks Provides a coherent treatment of the important topics and technologies contributed by leading academic and industry experts in the field This book provides a reference for professional automotive technologists (OEMS and suppliers), professionals in the area of Intelligent Transportation Systems, and researchers attracted to the field of wireless vehicular communications. Third and fourth year undergraduate and graduate students will also find this book of interest. For additional information please visit http://www.vanetbook.com

Download or read book 5G Enabled Vehicular Communications and Networking written by Xiang Cheng and published by Springer. This book was released on 2018-11-09 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates and reviews recent advanced techniques and important applications in vehicular communications and networking (VCN) from a novel perspective of the combination and integration of VCN and connected vehicles, which provides a significant scientific and technical support for future 5G-based VCN. 5G-Enabled Vehicular Communications and Networking introduces vehicular channel characteristics, reviews current channel modeling approaches, and then provides a new generic geometry-based stochastic modeling approach for vehicle-to-everything (V2X) communications. The investigation of vehicular channel measurements and modeling provides fundamental supports for the VCN system design. Then, this book investigates VCN-vehicle combination from PHY and MAC layers, respectively. As for the PHY layer, many advanced techniques that can be effectively applied in VCN to counter the PHY challenges are introduced, including novel ICI cancellation methods, index modulated OFDM, differential spatial modulation, and energy harvesting relaying. As for the MAC layer, distributed and centralized MAC designs are analyzed and compared in terms of feasibility and availability. Specifically, distributed congestion control, D2D-enabled vehicular communications, and centralized data dissemination scheduling are elaborated, which can significantly improve the network performance in vehicular networks. Finally, considering VCN-vehicle integration, this book introduces several hot-topic applications in vehicular networks, including electric vehicles, distributed data storage, unmanned aerial vehicles, and security and privacy, which indicates the significance and development value of VCN-vehicle integration in future vehicular networks and our daily life. The primary audience for this book includes professionals and researchers working in the field of vehicular communications, intelligent transportation systems (ITS), and Internet of vehicles (IoV). Advanced level students studying electrical engineering will also find this book useful as a secondary textbook for related courses.

Download or read book Vehicular Communication Systems written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-10-25 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Vehicular Communication Systems Computer networks known as vehicular communication systems consist of communicating nodes located in cars and roadside devices. These nodes share information with one another, including safety alerts and traffic data, as part of the network. They have the potential to be useful in reducing the occurrence of accidents and alleviating congestion. Each kind of node is a device that is intended only for use in dedicated short-range communications (DSRC). The DSRC operates in the 5.9 GHz band and has a bandwidth of 75 MHz. Its range is about 300 meters (980 ft). Intelligent transportation systems often include the development of vehicular communications as one of its components (ITS). How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Vehicular communication systems Chapter 2: Intelligent transportation system Chapter 3: Telematics Chapter 4: Advanced driver-assistance system Chapter 5: Dedicated short-range communications Chapter 6: Cognitive radio Chapter 7: IEEE 802.11p Chapter 8: Vehicular ad hoc network Chapter 9: Wireless ad hoc network Chapter 10: Intelligent vehicular ad hoc network Chapter 11: Communications Access for Land Mobiles Chapter 12: Mobile Slotted Aloha Chapter 13: Connected car Chapter 14: Cooperative Adaptive Cruise Control Chapter 15: Bernhard Walke Chapter 16: Techniques for Verification of Broadcast Information in Vehicular Ad hoc Networks Chapter 17: Vehicle-to-everything Chapter 18: 5G Automotive Association Chapter 19: Cellular V2X Chapter 20: Petros A. Ioannou Chapter 21: Internet of vehicles (II) Answering the public top questions about vehicular communication systems. (III) Real world examples for the usage of vehicular communication systems in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of vehicular communication systems' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of vehicular communication systems.

Download or read book Millimeter Wave Vehicular Communications written by Vutha Va and published by . This book was released on 2016-06-14 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a survey on mmWave vehicular networks including channel propagation measurement, PHY design, and MAC design.

Download or read book Vehicular Communications and Networks written by Wai Chen and published by Elsevier. This book was released on 2015-03-09 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicular Communications and Networks: Architectures, Protocols, Operation and Deployment discusses VANETs (Vehicular Ad-hoc Networks) or VCS (Vehicular Communication Systems), which can improve safety, decrease fuel consumption, and increase the capacity of existing roadways and which is critical for the Intelligent Transportation System (ITS) industry. Part one covers architectures for VCS, part two describes the physical layer, antenna technologies and propagation models, part three explores protocols, algorithms, routing and information dissemination, and part four looks at the operation and deployment of vehicular communications and networks. - Comprehensive coverage of the fundamental principles behind Vehicular Ad-hoc Networks (VANETS) and the rapidly growing need for their further development - Thorough overview of the design and development of key technologies and devices - Explores the practical application of this technology by outlining a number of case studies, testbeds and simulations employing vehicular communications and networks

Download or read book Communication Technologies for Vehicles written by Thomas Strang and published by Springer. This book was released on 2011-03-23 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the joint refereed proceedings of the Third International Workshop on Communication Technologies for Vehicles, Nets4Cars 2011and the First International Workshop on Communication Technologies for Vehicles in the Railway Transportation, Nets4Trains 2011, held in Oberpfaffenhofen, Germany, in March 2011. The 7 full papers of the rail track and 12 full papers of the road track presented together with a keynote were carefully reviewed and selected from 13 and 21 submissions respectively. They provide an overview over the latest technologies and research in the field of intra- and inter-vehicle communication and present original research results in areas relating to communication protocols and standards, mobility and traffic models, experimental and field operational testing, and performance analysis.

Download or read book Vehicular Technologies written by Lorenzo Galati Giordano and published by BoD – Books on Demand. This book was released on 2013-02-13 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an insight for students, researchers and practitioners on the area of vehicular communications explaining and presenting solutions for some of the most critical issues in this field and, hopefully, inspiring new research directions. The book is organized in Sections, which respond to different layers and aspects of the vehicular technology: infrastructures, cells deployment and its integration with the V2V part, access procedures, advanced services and applications as localization, spectrum sensing, relay-based cooperative networks.

Download or read book Multiplexed Networks for Embedded Systems written by Dominique Paret and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiplexed networks are essential for the unified, efficient and cost-effective exchange of electronic information within embedded component systems. This is especially important in automotive manufacturing as vehicles become increasingly reliant on robust electronic networks and systems for improved reliability, anti-lock brake systems (ABS), steering, on-board navigation systems, and much more. The latest systems such as X-by-Wire and FlexRay aim to produce faster, fault-tolerant network component interconnects, for state-of-the-art network implementation and safer, more reliable engineering of vehicular systems. This book provides a thorough and comprehensive introduction to automotive multiplexed network buses, covering the technical principles, components, implementation issues and applications. Key features: Presents a thorough coverage of the controller area network (CAN) protocol, including information on physical layers, conformity problems, hardware and software tools, and application layers. Gives a detailed description of the new local interconnect network (LIN) bus, setting out its developments, properties, problems and ways to overcome these. Examines the existing and emerging network buses such as time-triggered CAN (TTCAN), FlexRay and X-by-Wire. Explores the possibilities for linking the various buses that are discussed, explaining how the Fail-Safe-System basis chip (SBC) and other gateways are designed and constructed. Analyses wired and wireless internal and external serial links, including Safe-by-Wire plus, I2C, Media Oriented Systems Transport (MOST), remote keyless entry, tyre pressure monitoring systems (TPMS) and Bluetooth. A valuable guide to embedded systems for a range of applications, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe-by-Wire...is essential reading for electronics engineers and researchers developing electronics for the automotive industry. It is also useful for practising aerospace engineers and other practitioners interested in the application of network technologies, and advanced students taking courses on automotive and embedded system design.

Download or read book Decision Support Systems and Industrial IoT in Smart Grid Factories and Cities written by Butun, Ismail and published by IGI Global. This book was released on 2021-06-25 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet of things (IoT) is an emerging research field that is rapidly becoming an important part of our everyday lives including home automation, smart buildings, smart things, and more. This is due to cheap, efficient, and wirelessly-enabled circuit boards that are enabling the functions of remote sensing/actuating, decentralization, autonomy, and other essential functions. Moreover, with the advancements in embedded artificial intelligence, these devices are becoming more self-aware and autonomous, hence making decisions themselves. Current research is devoted to the understanding of how decision support systems are integrated into industrial IoT. Decision Support Systems and Industrial IoT in Smart Grid, Factories, and Cities presents the internet of things and its place during the technological revolution, which is taking place now to bring us a better, sustainable, automated, and safer world. This book also covers the challenges being faced such as relations and implications of IoT with existing communication and networking technologies; applications like practical use-case scenarios from the real world including smart cities, buildings, and grids; and topics such as cyber security, user privacy, data ownership, and information handling related to IoT networks. Additionally, this book focuses on the future applications, trends, and potential benefits of this new discipline. This book is essential for electrical engineers, computer engineers, researchers in IoT, security, and smart cities, along with practitioners, researchers, academicians, and students interested in all aspects of industrial IoT and its applications.

Download or read book Vehicular Networking written by Marc Emmelmann and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last 15 years, the interest in vehicular communication has grown, especially in the automotive industry. Due to the envisioned mass market, projects focusing on Car-to-X communication experience high public visibility. This book presents vehicular communication in a broader perspective that includes more than just its application to the automotive industry. It provides, researchers, engineers, decision makers and graduate students in wireless communications with an introduction to vehicular communication focussing on car-to-x and train-based systems. Emphasizes important perspectives of vehicular communication including market area, application areas, and standardization issues as well as selected topics featuring aspects of developing, prototyping, and testing vehicular communication systems. Supports the reader in understanding common characteristics and differences between the various application areas of vehicular communication. Offers both an overview of the application area and an in-depth discussion of key technologies in these areas. Written by a wide range of experts in the field.

Download or read book Vehicle Safety Communications written by Tao Zhang and published by John Wiley & Sons. This book was released on 2012-09-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date, in-depth look at the current research, design, and implementation of cooperative vehicle safety communication protocols and technology Improving traffic safety has been a top concern for transportation agencies around the world and the focus of heavy research and development efforts sponsored by both governments and private industries. Cooperative vehicle systems—which use sensors and wireless technologies to reduce traffic accidents—can play a major role in making the world's roads safer. Vehicle Safety Communications: Protocols, Security, and Privacy describes fundamental issues in cooperative vehicle safety and recent advances in technologies for enabling cooperative vehicle safety. It gives an overview of traditional vehicle safety issues, the evolution of vehicle safety technologies, and the need for cooperative systems where vehicles work together to reduce the number of crashes or mitigate damage when crashes become unavoidable. Authored by two top industry professionals, the book: Summarizes the history and current status of 5.9 GHz Dedicated Short Range Communications (DSRC) technology and standardization, discussing key issues in applying DSRC to support cooperative vehicle safety Features an in-depth overview of on-board equipment (OBE) and roadside equipment (RSE) by describing sample designs to illustrate the key issues and potential solutions Takes on security and privacy protection requirements and challenges, including how to design privacy-preserving digital certificate management systems and how to evict misbehaving vehicles Includes coverage of vehicle-to-infrastructure (V2I) communications like intersection collision avoidance applications and vehicle-to-vehicle (V2V) communications like extended electronic brake lights and intersection movement assist Vehicle Safety Communications is ideal for anyone working in the areas of—or studying—cooperative vehicle safety and vehicle communications.

Download or read book Vehicular Networks written by Abdelfatteh Haidine and published by . This book was released on 2024-05-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicles have played a major role in the development of societies over generations. Their role will reach the next level of importance and innovation with the development of intelligent/smart or connected vehicles, which will take over some (assisted driving) or all (fully autonomous driving) of the driver's responsibility in operating the vehicle. However, this (re)evolution cannot be achieved without a robust, secure, and highly reliable communications infrastructure. Indeed, vehicular communication technologies offer a wide range of benefits that address key challenges in transportation, including safety, efficiency, sustainability, and user experience. As these technologies continue to evolve and mature, they have the potential to transform the way people and goods move, shaping the future of mobility for generations to come. This book deals with modern aspects related to vehicular communications. The first section discusses modern applications for new vehicle applications, such as automated guided vehicles in smart maritime ports, logistics assets, and so on. The second section of the book explores the advantages of some modern approaches to optimizing the functioning of vehicular communications, such as machine learning as a part of artificial intelligence, and the different security concerns of connected vehicles and infrastructures.

Download or read book Vehicular Communications for Smart Cars written by Niaz Chowdhury and published by CRC Press. This book was released on 2021-12-30 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics from the smart transportation domain. It discusses protocols, applications and security concerns in various vehicular networks using examples and easy-to-understand figures. The first four chapters focus on vehicular network protocols and applications, while the remaining four chapters incorporate security, trust and privacy issues with examples from real-life cases. The book concludes with a vision of what to expect in the near future and will be an invaluable resource for anybody interested in this nascent technology and its variegated applications. Dr. Niaz Chowdhury is a postdoctoral research associate at the Knowledge Media Institute, the Open University in England. Dr. Lewis M. Mackenzie is a senior lecturer in computing science at the University of Glasgow.

Download or read book Telematics Communication Technologies and Vehicular Networks Wireless Architectures and Applications written by Huang, Chung-Ming and published by IGI Global. This book was released on 2009-12-31 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book examines critical issues involved with telematics such as vehicular network infrastructure, vehicular network communication protocols, and vehicular services and applications"--Provided by publisher.

Download or read book Communication Technologies for Vehicles written by Alexey Vinel and published by Springer. This book was released on 2012-04-23 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the joint refereed proceedings of the 4th International Workshop on Communication Technologies for Vehicles/Trains, Nets4Cars 2012 and Nets4Trains 2012, held in Vilnius, Lithuania, in April 2012. The 4 full papers of the rail track and 11 full papers of the road track presented were carefully reviewed and selected from numerous submissions. They provide an overview over latest technologies and research in the field of intra- and inter-vehicle communications (protocols and standards), mobility and traffic models (models, methodologies, and techniques), testing, and applications.

Download or read book Vehicular Networks written by Hassnaa Moustafa and published by Auerbach Publications. This book was released on 2009-04-09 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Vehicular Networks technology enters a critical phase in its evolution, academic institutions, industry, and governments worldwide are investing significant resources into large-scale deployment of such networks in order to leverage its benefits to communication, road safety, and improved traffic flow. Despite the current proliferation of conferences to address the technical, policy, and economic challenges associated with this exciting new technology, notably absent is a self-contained book that integrates and covers these topics in sufficient detail. Vehicular Networks: Techniques, Standards and Applications examines the latest advances in the evolution of vehicular networks, presenting invaluable state-of-the-art ideas and solutions for professionals and academics at work on numerous international development and deployment projects. A versatile text, it cross-references all key aspects, including medium access, scheduling, mobility, services, market introduction, and standard specifications. This informative guide: Describes the roles of networks operators, car manufacturers, service providers, and governmental authorities in development of vehicular technology Illustrates the benefits and real-life applications of vehicular networks Analyzes possible business models for network deployment Examines potential services and possible deployment architectures Explores the technical challenges of deployment, including use of MAC protocols, routing, data dissemination, dynamic IP autoconfiguration, mobility management, security, and driver/passenger privacy Illustrative Figures to Clarify Both Basic and Advanced Concepts Using simplified language, this book elucidates the distinct behavior and characteristics that distinguish vehicular networks from other types of mobile networks. It is an invaluable resource for those working with or studying vehicular networks and other wireless or mobile communications systems.