Download or read book Advances in Polymer Science written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Polymer Science 21st Century written by C. Craver and published by Elsevier. This book was released on 2000-12-19 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 75th Anniversary Celebration of the Division of Polymeric Materials: Science and Engineering of the American Chemical Society, in 1999 sparked this third edition of Applied Polymer Science with emphasis on the developments of the last few years and a serious look at the challenges and expectations of the 21st Century.This book is divided into six sections, each with an Associate Editor responsible for the contents with the group of Associate Editors acting as a board to interweave and interconnect various topics and to insure complete coverage. These areas represent both traditional areas and emerging areas, but always with coverage that is timely. The areas and associated chapters represent vistas where PMSE and its members have made and are continuing to make vital contributions. The authors are leaders in their fields and have graciously donated their efforts to encourage the scientists of the next 75 years to further contribute to the well being of the society in which we all live.Synthesis, characterization, and application are three of the legs that hold up a steady table. The fourth is creativity. Each of the three strong legs are present in this book with creativity present as the authors were asked to look forward in predicting areas in need of work and potential applications. The book begins with an introductory history chapter introducing readers to PMSE. The second chapter introduces the very basic science, terms and concepts critical to polymer science and technology. Sections two, three and four focus on application areas emphasizing emerging trends and applications. Section five emphasizes the essential areas of characterization. Section six contains chapters focusing of the synthesis of the materials.
Download or read book Polymer Chemistry written by Sebastian Koltzenburg and published by Springer. This book was released on 2017-12-11 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook describes the synthesis, characterization and technical and engineering applications of polymers. Offering a broad and balanced introduction to the basic concepts of macromolecular chemistry and to the synthesis and physical chemistry of polymers, it is the ideal text for graduate students and advanced Masters students starting out in polymer science. Building on the basic principles of organic chemistry and thermodynamics, it provides an easily understandable and highly accessible introduction to the topic. Step by step, readers will obtain a detailed and well-founded understanding of this vibrant and increasingly important subject area at the intersection between chemistry, physics, engineering and the life sciences.Following an approach different from many other textbooks in the field, the authors, with their varying backgrounds (both from academia and industry), offer a new perspective. Starting with a clear and didactic introduction, the book discusses basic terms and sizes and shapes of polymers and macromolecules. There then follow chapters dedicated to polymers in solutions, molar mass determination, and polymers in the solid state, incl. (partially) crystalline or amorphous polymers as well as their application as engineering materials. Based on this information, the authors explain the most important polymerization methods and techniques. Often neglected in other textbooks, there are chapters on technical polymers, functional polymers, elastomers and liquid crystalline polymers, as well as polymers and the environment. An overview of current trends serves to generate further interest in present and future developments in the field.This book is the English translation of the successful German textbook "Polymere", which was awarded the Chemical Industry in Germany’s 2015 literature Prize (“Literaturpreis des Fonds der Chemischen Industrie”) for its innovative, novel approach, and its good accessibility and readability, while at the same time providing comprehensive coverage of the field of polymer science.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Applied Methodologies in Polymer Research and Technology written by Abbas Hamrang and published by CRC Press. This book was released on 2014-10-28 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of polymeric materials and provides industry professionals and researchers in polymer science and technology with a single, comprehensive book summarizing all aspects involved in the functional materials production chain.This volume presents the latest developments and trends in advanced polymer materials and structur
Download or read book Polymer Science and Innovative Applications written by Mariam Al Ali AlMaadeed and published by Elsevier. This book was released on 2020-05-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Innovative Applications: Materials, Techniques, and Future Developments introduces the science of innovative polymers and composites, their analysis via experimental techniques and simulation, and their utilization in a variety of application areas. This approach helps to unlock the potential of new materials for product design and other uses. The book also examines the role that these applications play in the human world, from pollution and health impacts, to their potential to make a positive contribution in areas including environmental remediation, medicine and healthcare, and renewable energy. Advantages, disadvantages, possibilities, and challenges relating to the utilization of polymers in human society are included. - Presents the latest advanced applications of polymers and their composites and identifies key areas for future development - Introduces the simulation methods and experimental techniques involved in the modification of polymer properties, supported by clear and detailed images and diagrams - Supports an interdisciplinary approach, enabling readers across different fields to harness the power of new materials for innovative applications
Download or read book Compositional Analysis of Polymers written by Aleksandr M. Kochnev and published by CRC Press. This book was released on 2016-02-24 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical and technological development demands the creation of new materials that are stronger, more reliable, and more durable-materials with new properties. This new book covers a broad range of polymeric materials and technology and provides researchers in polymer science and technology with new research on the functional materials production c
Download or read book Industrial Applications of Poly lactic acid written by Maria Laura Di Lorenzo and published by Springer. This book was released on 2018-08-22 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science.The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics.Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
Download or read book Current Trends and Future Developments on Bio Membranes written by Angelo Basile and published by Elsevier. This book was released on 2018-07-18 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Trends and Future Developments on (Bio-) Membranes: Carbon Dioxide Separation/Capture by Using Membranes explores the unique property of membranes to separate gases with different physical and chemical properties. The book covers both polymeric and inorganic materials for CO2 separation and explains their mechanism of action, allowing for the development and most appropriate and efficient processes. It also lists the advantages of using membranes instead of other separation techniques, i.e., their low operating costs and low energy consumption. This book offers a unique opportunity for scientists working in the field of membrane technology for CO2 separation and capture. - Outlines numerous membrane-based technologies for CO2 separation and capture - Lists new, advanced separation techniques and production processes - Includes various applications, modelling, and the economic considerations of each process - Covers advanced techniques for the separation of CO2 in natural gas
Download or read book Thermal Properties of Bio based Polymers written by Maria Laura Di Lorenzo and published by Springer Nature. This book was released on 2020-02-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
Download or read book New Developments in Polymer Analytics I written by M. Schmidt and published by Springer. This book was released on 2003-07-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two companion volumes of "Advances in Polymer Science" - Volumes 150 and 151 - deal with recent progress in the characterization of polymers, mostly in solution but also at surfaces. The contributions comprise multidimensional chromatography for elucidation, the composition and the chain length distribution of copolymers, capillary electrophoresis of synthetic water-soluble polymers including polyelectrolytes, field flow fractionation techniques for quick and reliable separation and characterization of broad polymer samples and a novel application of thermal grating experiments for probing Brownian and thermal diffusion. Finally the rapid development of atomic forces techniques is reviewed with particular emphasis on the visualization of macromolecules and the patterning of surfaces.
Download or read book Materials Science of Polymers written by A. K. Haghi and published by CRC Press. This book was released on 2015-05-27 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical and technological development demands the creation of new materials that are stronger, more reliable, and more durable-materials with new properties. This book skillfully blends and integrates polymer science, plastic technology, and rubber technology to highlight new developments and trends in advanced polyblends. The fundamentals of pol
Download or read book Redox Polymers for Energy and Nanomedicine written by Nerea Casado and published by Royal Society of Chemistry. This book was released on 2020-10-20 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Redox Polymers for Energy and Nanomedicine highlights trends in the chemistry, characterization and application of polymers with redox properties.
Download or read book Synthesis Structure and Properties of Poly lactic acid written by Maria Laura Di Lorenzo and published by Springer. This book was released on 2017-10-20 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science.The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics.Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students
Download or read book Adhesive Chemistry written by Lieng-Huang Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first symposium on Recent Advances in Adhesion, held September, 1971 in Washington, D. C. , this Division of the American Chemical Society has continuously sponsored several symposia on adhesion and adhesives. The chemists have gradually realized the importance of adhesion in various fields of science and technology. During these years, the science of adhesion has steadily grown along with progress in surface science and fracture mechanics. Moreover, new adhesives have been invented and applied in actual structures, for example, structural and aerospace adhesives. In response to socio-economic demands, new forms of adhesives have been introduced to combat the problems of pollution and to promote energy-conservation. The developments of hot-melt adhesives, waterborne adhesives, and radiation-curable adhesives are vivid examples of successes in solving some of the problems. As chemists, our hatural desire is to understand how those new adhesives and new forms of adhesives are made. Thus, we are interested in learning about the chemistry of adhesives so that we may create new generations of materials to satisfy future needs. It was based on this common interest that w~ set forth to org'anize this Symposium on Recent Developments in Adhesive Chemistry. It was held from March 21 through 23, 1983 in the Westin Hotel, Seattle, Washington. The Symposium was very well attended. As a matter of fact, for the first two sessions, we had to move from the smaller Mt. St.
Download or read book New Developments in Polymer Analytics II written by Manfred Schmidt and published by Springer. This book was released on 2003-07-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two companion volumes of "Advances in Polymer Science" - Volumes 150 and 151 - deal with recent progress in the characterization of polymers, mostly in solution but also at surfaces. The contributions comprise multidimensional chromatography for elucidation, the composition and the chain length distribution of copolymers, capillary electrophoresis of synthetic water-soluble polymers including polyelectrolytes, field flow fractionation techniques for quick and reliable separation and characterization of broad polymer samples and a novel application of thermal grating experiments for probing Brownian and thermal diffusion. Finally the rapid development of atomic forces techniques is reviewed with particular emphasis on the visualization of macromolecules and the patterning of surfaces.
Download or read book Polymer Reaction Engineering of Dispersed Systems written by Werner Pauer and published by Springer. This book was released on 2018-11-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science.The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics.Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
