Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Handbook of Polymer Science and Technology written by Nicholas Cheremisinoff and published by CRC Press. This book was released on 2023-07-21 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook focuses on physical, structural, and compositional properties of elastomeric materials and plastics. It provides a broad overview of the physical and physicochemical properties of synthetic rubbers that are used in conventional cured applications.
Download or read book Crystallization of Polymers Volume 2 Kinetics and Mechanisms written by Leo Mandelkern and published by Cambridge University Press. This book was released on 2004-09-30 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Crystallization of Polymers, 2nd Edition, Leo Mandelkern provides a self-contained, comprehensive, and up-to-date treatment of polymer crystallization. Volume 2 of this edition provides an authoritative account of the kinetics and mechanisms of polymer crystallization, building from the equilibrium concepts presented in volume 1. As crystalline polymers rarely, if ever, achieve their equilibrium state, this books serves as a bridge between equilibrium concepts and the state that is finally achieved. With a comprehensive treatment of the surrounding theories and experimental results from simple to complex polymer systems, this book will be an invaluable reference work for all chemists, physicists and materials scientists working in the area of polymer crystallization.
Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-05-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.
Download or read book SPE ANTEC 1999 Proceedings written by Spe and published by CRC Press. This book was released on 1999-04-29 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the conference proceedings of the SPE/Antac on 'Plastics Bridging the Millennia- subtopic of 'Materials', held on the 2-6 May 1999 in New York City, USA.
Download or read book Macromolecular Science written by R. Ulrich and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1974, as we approached the National Bicentennial and the Centenary of the American Chemical Society, Professor Otto Vogl, then Chairman of the Division of Polymer Chemistry, arranged a very special symposium dedicated to a review of the history of the Divi sion. It was an extraordinary occasion which included remarks by Professors Herman Mark, Charles Marvel, William Bailey, and Charles Overberger, all past Chairmen of the Division. The Executive Committee of the Division of Polymer Chemistry felt that 1976 deserved even more attention since it was to be also the 25th, the Silver Anniversary, of the Division of Polymer Chemis try. This year would be a most appropriate one not only to review milestones in our discipline, but also to look to the future. It was decided to undertake this volume and Dr. R. D. Ulrich agreed to serve as editor in assembling the collected papers. It is the hope of the officers of the Division that this volume will serve many purposes - a reference text, a record, and a source of perspective. F. E. Bailey Chairman (1976) Division of Polymer Chemistry American Chemical Society vii Contents R. D. Ulrich - The History of the ACS Division 1 of Polymer Chemistry, Inc. Bovey F. A. 31 F. R. Eirich 53 J. D. Ferry 63 P. J. Flory 69 Huggins M. L. 99 L. Mandelkern 113 123 H. F. Mark • C. S. Marvel 133 B. Maxwell 143 .
Download or read book Polyenes Advances in Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyenes: Advances in Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Polyenes. The editors have built Polyenes: Advances in Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Polyenes in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Polyenes: Advances in Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Polymer Crystallization written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2023-06-28 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Crystallization Control the development of polymer crystals with this groundbreaking introduction Polymer crystallization is a crucial component of polymer development that impacts processing, applications, presentation, and more. Intervention in the polymer crystallization process, in the form of nanofilters, compatibilizers, and more, has the potential to improve optical and chemical properties, improve degrees of crystallinity, and increase the hardness of polymer composites. The myriad applications of crystalline polymers make this one of the most exciting and fast-growing fields in polymer research. Polymer Crystallization provides a comprehensive introduction to this field and its most important recent developments. It characterizes and analysis an expansive range of crystalline polymers and discusses possible mechanisms for influencing their crystallization processes to impact a variety of outcomes and applications. These applications include industries from food packaging to automotive parts to medical and aerospace materials. Polymer Crystallization readers will also find: Detailed treatment of polymer morphology, rheology, modeling, and more Thorough introduction to the fundamentals of polymer crystallization Discussion of environmental safety issues and avenues for future research Polymer Crystallization is a useful reference for materials scientists, polymer scientists, biomedical scientists, and advanced undergraduate and graduate students in these and related fields.
Download or read book Polymer Crystallization written by Günter Reiter and published by Springer. This book was released on 2008-01-11 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classical view on polymer crystallization basically focused on the expla- tion of a few macroscopically observable parameters like the thickness of the resulting lamellar structure and the corresponding growth rates. However, the emerging paradigm for the description of chain crystals is too simple and cannot account for the complex non-equilibrium processes responsible for structure f- mation on various levels, ranging from the nanometer up to the millimeter scale. This complexity detected by several novel experimental results led to a renewed interest in this ”old” topic of polymer crystallization. These new ?ndings c- cern the early stages of the crystallization process, crystal formation in con?ned geometries like ultra-thin ?lms and the competition between (micro)phase s- aration and crystallization in copolymers and blends. In particular, high spatial resolution techniques such as atomic force microscopy provided deeper insight into the molecular organization of crystallizable polymers. Computer simu- tions based on microscopic processes were used to improve our understanding of how polymer crystals are nucleated and how they grow. New ideas emerged about possible multistage pathways which are followed during the formation of polymer lamellae. The importance and the consequences of the non-equilibrium character of polymer crystals got signi?cantly more attention. Links and ana- gies to growth phenomena and pattern formation in general are being developed. However, these ideas are still subject of intensive and controversial discussions.
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biopolymers written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook focuses on biopolymers for both environmental and biomedical applications. It shows recent advances in technology in all areas from chemical synthesis or biosynthesis to end use applications. These areas have not been covered in a single book before and they include biopolymers for chemical and biotechnological modifications, material structures, characterization, processing, properties, and applications. After the introduction which summarizes the importance of biopolymer in the market, the book covers almost all the topics related to polysaccharides, biofibers, bioplastics, biocomposites, natural rubber, gums, bacterial and blood compatible polymers, and applications of biopolymers in various fields.
Download or read book Polyoxymethylene Handbook written by Sigrid Lüftl and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent, unique, and up-to-date reference book on polyoxymethylene, its compounds, and nanocomposites, specifically dealing with synthesis, characterization, processing, morphology, and applications Polyoxymethylene Handbook: Structure, Properties, Applications, and Their Nanocomposites summarizes many of the state-of-the-art technological and research accomplishments in the area of polyoxymethylene (POM). It discusses in length the polymerization and manufacture of polyoxymethylene and various types of additives, as well as the structure and crystallization behavior of POM and its thermal, physical, mechanical, flame retardant, chemical, electrical, and optical properties. The environmental impact of POM is also addressed. The 15 chapters in the handbook are written by prominent researchers from industry, academia, and government/private research laboratories across the globe. Because so few books have ever been published on polyoxymethylene, the handbook is a very valuable reference tool that truly serves as a “one stop” resource for readers and users seeking solutions to both fundamental and applied problems.
Download or read book Physics Briefs written by and published by . This book was released on 1988 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
