Download or read book Cryostat Design written by J.G. Weisend II and published by Springer. This book was released on 2016-08-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are leading experts in the field, most of whom participated in the design of the cryostats being described. The concluding chapter offers an overview of lessons learned and summarises some key hints and tips for practical cryostat design. The book will help the reader to expand their knowledge of many disciplines required for good cryostat design, including the cryogenic properties of materials, heat transfer and thermal insulation, instrumentation, safety, structures and seals.
Download or read book Experimental Techniques for Low Temperature Measurements written by Jack Ekin and published by Oxford University Press. This book was released on 2006-10-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1973 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hyatt Regency Hotel, Columbus, Ohio was the venue for the 1995 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Jim Peeples, of CVI, Inc., was conference chairman. Columbus is the home of the Battelle Memorial Institute, a pioneer in cryogenic materials development; the home of CVI, Inc., and Lake Shore Cryotronics, Inc., two leading manufacturers of cryogenic equipment; and it is the home of Ohio State University, where research on liquid helium has long been conducted. The program consisted of 315 CEC papers, nearly the same number as for CEC-91. This was the second largest number of papers ever submitted to the CEC. Of these, 252 papers are published here, in Volume 41 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a number of photographs taken during the awards lunch on July 20, 1995. Photographs have often been taken during the conferences, but they have never been used. The pictures are of the awardees, the conference chairs, and the organizers. They are distributed through out the books on pages that would otherwise have been blank. The pictures can be found on the following pages: 28, 232, 334, 536, 640, 826, 990, 1032, 1202, 1462,1682,1888, and 1994.
Download or read book Experimental Techniques for Low temperature Measurements written by and published by . This book was released on 2006 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineers Handbook Volume 4 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineer's ready reference for mechanical power and heat Mechanical Engineer's Handbook provides the most comprehensive coverage of the entire discipline, with a focus on explanation and analysis. Packaged as a modular approach, these books are designed to be used either individually or as a set, providing engineers with a thorough, detailed, ready reference on topics that may fall outside their scope of expertise. Each book provides discussion and examples as opposed to straight data and calculations, giving readers the immediate background they need while pointing them toward more in-depth information as necessary. Volume 4: Energy and Power covers the essentials of fluids, thermodynamics, entropy, and heat, with chapters dedicated to individual applications such as air heating, cryogenic engineering, indoor environmental control, and more. Readers will find detailed guidance toward fuel sources and their technologies, as well as a general overview of the mechanics of combustion. No single engineer can be a specialist in all areas that they are called on to work in the diverse industries and job functions they occupy. This book gives them a resource for finding the information they need, with a focus on topics related to the productions, transmission, and use of mechanical power and heat. Understand the nature of energy and its proper measurement and analysis Learn how the mechanics of energy apply to furnaces, refrigeration, thermal systems, and more Examine the and pros and cons of petroleum, coal, biofuel, solar, wind, and geothermal power Review the mechanical parts that generate, transmit, and store different types of power, and the applicable guidelines Engineers must frequently refer to data tables, standards, and other list-type references, but this book is different; instead of just providing the answer, it explains why the answer is what it is. Engineers will appreciate this approach, and come to find Volume 4: Energy and Power an invaluable reference.
Download or read book Scifi 93 Proceedings Of The Scintillating Fiber Detectors written by Alan D Bross and published by World Scientific. This book was released on 1995-03-07 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain over 80 contributions from an international group of scientists and engineers actively working on applications of fiber technology in high energy physics and related fields. Sessions included reviews of past, current and possible future detectors incorporating fiber technology for tracking and calorimetry. Special sessions covered photodetection techniques, including VLPCs, APDs and hybrid phototubes; recent advances in fiber structure, optical interconnection and mechanical support; and scintillation materials, including new developments in scintillation dyes and studies of radiation and environmental effects.Technical advances have been rapid in this promising area of detector development, and the SciFi93 proceedings serve as a useful reference on the state of the art.
Download or read book Advances in Cryogenic Engineering written by K.D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1985 joint Cryogenic Engineering/International Cryogenic Materi als Conference was held on the campus of the Massachusetts Institute of Technology, Cambridge, Massachusetts. About 350 papers were presented at the joint conference on a wide variety of topics in cryogenic science and engineering. This volume of Advances in cryogenic Eogineerlng, the thirty-first in the series which began in 1954, contains most of the papers which were presented at the 1985 Cryogenic Engineering Conference. Each paper was rigorously peer reviewed to maintain the international reputation of Advances as the premier archival publication in the field of cryoscience, engineering, and technology. All the papers published in Volume 31 contain an abstract. A copy of the book will be sent to all maj or abstracting services, which should improve retrieval of the information contained in the published papers. I would like to thank the authors and those who served as reviewers. I especially appreciate the assistance of my colleague M. E. Stone who edited some of the papers for this volume. Terry Gutierrez was invaluable in preparing the manuscripts for publication, and I thank her. xvii DEDICATION Dr. Samuel C. Collins, Professor Emeritus of the Massachusetts Institute of Technology, internationally known as the father of practical helium liquefiers and founder of the MIT Cryogenic Engineering Laboratory, died on June 19, 1984, in George Washington University Hospital, Washington, DC.
Download or read book Technology of Liquid Helium written by Richard H. Kropschot and published by . This book was released on 1968 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Monograph written by and published by . This book was released on 1959 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of High Temperature Superconductors to Electric Power Equipment written by Swarn S. Kalsi and published by John Wiley & Sons. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only one-stop reference to design, analysis, and manufacturing concepts for power devices utilizing HTS. High temperature superconductors (HTS) have been used for building many devices for electric grids worldwide and for large ship propulsion motors for the U.S. Navy. And yet, there has been no single source discussing theory and design issues relating to power applications of HTS—until now. This book provides design and analysis for various devices and includes examples of devices built over the last decade. Starting with a complete overview of HTS, the subsequent chapters are dedicated to specific devices: cooling and thermal insulation systems; rotating AC and DC machines; transformers; fault current limiters; power cables; and Maglev transport. As applicable, each chapter provides a history of the device, principles, configuration, design and design challenges, prototypes, and manufacturing issues, with each ending with a summary of the material covered. The design analysis and design examples provide critical insight for readers to successfully design their own devices. Original equipment manufacturer (OEM) designers, industry and utilities users, universities and defense services research groups, and senior/postgraduate engineering students and instructors will rely on this resource. "HTS technology reduces electric losses and increases the efficiency of power equipment. This book by Swarn Kalsi, a leading expert on the HTS subject, provides a survey of the HTS technology and the design rules, performance analyses, and manufacturing concepts for power application-related devices. It compares conventional and HTS technology approaches for device design and provides significant examples of devices utilizing the HTS technology today. The book is useful for a broad spectrum of professionals worldwide: students, teaching staff, and OEM designers as well as users in industry and electric utilities." —Professor Dr. Rolf Hellinger, Research and Technologies Corporate Technology, Siemens AG
Download or read book National Symposium on Developments in Irradiation Testing Technology written by and published by . This book was released on 1969 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Technology Development on Superconducting Current Limiting Transformers written by Hellmann, Sebastian and published by KIT Scientific Publishing. This book was released on 2020-01-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spinoff written by and published by . This book was released on 1996 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Cryogenic Engineering written by R.W. Fast and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 1991 Cryogenic Engineering Conference held in Huntsville, Alabama, June 11-14, 1991.
Download or read book Low Temperature Heat Transfer and Cryostat Design for a Large Area High Purity Germanium Gamma Ray Camera written by William Robert Rice and published by . This book was released on 1979 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Detectors for Astronomy written by James W. Beletic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Workshop "Optical Detectors for Astronomy" was held during October 8-10, 1996 at the headquarters of the European Southern Observatory in Garching, Germany. This was the third meeting of its kind, previous meetings being held in 1991 and 1993, but this is the first ESO "CCD Workshop" that has published proceedings. Most of the leading manufacturers and major astronomical observatories were represented, with the 117 attendees coming together from 14 different countries that spanned every continent on Earth. The motivation for the ESO CCD Workshop series is the creation of informal and open venue of information exchange about astronomical CCD detectors and systems. Judging from the reaction and feedback of the participants, the 1996 workshop was as successful as the previous editions, which is a credit to all who attended. The Workshop was organized as a mixture of invited talks, oral presentations, poster sessions and roundtable discussions, the latter used to foster a free exchange of ideas among participants. These technical sessions were complemented by an opening reception and a congenial evening in downtown Munich, which included a walking tour of the historic area followed by dinner at the famous Franziskaner brewery and an after dinner talk by Walter Kosonocky, who reviewed the history of CCD technology.
