Download or read book Cryogenic Two Phase Flow written by N. N. Filina and published by Cambridge University Press. This book was released on 1996-05-31 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic systems that involve two-phase (vapor-liquid) flows are widely used in industries such as aerospace, metallurgy, power engineering, and food production, as well as in high energy physics research. The purpose of this book is to describe characteristic features of cryogenic systems involving two-phase flow, create mathematical models of these systems, and then show how the models may be used to develop optimal designs for practical cryogenic systems. The models are examined using analytical and numerical techniques, and then the predictions are compared to experimental measurements. Since transient phenomena can produce severe and unexpected effects in cryogenic systems, the authors pay particular attention to this important topic. Examples in the book are drawn from cryogenic fluid transport, gasification, and the stabilization of superconducting magnets. Much of this work is related to the development of large Russian systems in the areas of space technology, energy research, and particle physics. This book, the first devoted solely to cryogenic two-phase flow, will be a valuable reference for cryogenic engineers and scientists.
Download or read book Low Temperature and Cryogenic Refrigeration written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration plays a prominent role in our everyday lives, and cryogenics plays a major role in medical science, space technology and the cooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advanced thermodynamics of reverse-cycle machines, applications in medicine, cryogenics, heat pipes, gas-solid absorption refrigeration, multisalt resorption heat pumps, cryocoolers, thermoacoustic refrigeration, cryogenic heat transfer and enhancement and other topics covering theory, design, and applications, such as pulse tube refrigeration, which is the most efficient of all cryocoolers and can be used in space missions.
Download or read book Cryogenic Two phase Flow Characteristics of Helium I in Vertical Tubes written by Adel Khalil Hassan Khalil and published by . This book was released on 1978 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by Taylor & Francis. This book was released on 1999-05-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied heat transfer principles in the range of extremely low temperatures. The specific features of heat transfer at cryogenic temperatures, such as variable properties, near critical convection, and Kapitza resistance, are described. This book includes many example problems, in each section, that help to illustrate the applications of t
Download or read book Advances in Cryogenic Engineering written by K. D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Colorado and the National Bureau of Standards have once again served as hosts for the Cryogenic Engineering Conference in Boulder, Colorado. In presenting the papers of this twelfth annual meeting, the 1966 Cryogenic Engineering Conference Committee has again recognized the excellent cooperation which has existed between these two organizations over the past decade with regard to both cryogenic research and conference activity. This cooperation was demonstrated not only at the 1966 Cryogenic Engineering Conference but also at the International Institute of Refrigeration, Commission I Meeting, which was also hosted by these two organizations immediately following the Cryogenic Engineering Conference. These two meetings have provided attendees with one of the most comprehensive coverages of cryogenic topics that has ever been presented at one location. Emphasis on major international advances in helium technology at the International Institute of Refrigeration, Commission I Meeting has been possible largely through the National Science Foundation Grant GK 1116 to the University of Colorado. The Cryogenic Engineering Conference Committee gratefully acknowledges this support because of its valuable international contribution to the Cryogenic Engineering Conference. As in the past, the Cryogenic Engineering Conference Committee is grateful for the continued assistance of all the dedicated workers in the cryogenic field who have contributed their time reviewing the preliminary papers for the program and the final manuscripts for this volume.
Download or read book Technical News Bulletin written by and published by . This book was released on 1967 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 1994 with total page 2106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Cryogenic Engineering written by Quan-Sheng Shu and published by Springer. This book was released on 2013-12-19 with total page 967 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. • In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.
Download or read book Proceedings of the Twentieth International Cryogenic Engineering Conference ICEC20 written by Liang Zhang and published by Elsevier. This book was released on 2006-02-20 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 20th International Cryogenic Engineering Conference
Download or read book Advances in Cryogenic Engineering written by R.W. Fast and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 1991 Cryogenic Engineering Conference held in Huntsville, Alabama, June 11-14, 1991.
Download or read book Two phase Choked Flow of Cryogenic Fluids in Converging diverging Nozzles written by Robert J. Simoneau and published by . This book was released on 1979 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data are presented for the two phase choked flow of three cryogenic fluids - nitrogen, methane, and hydrogen - in four converging-diverging nozzles. The data cover a range of inlet stagnation conditions, all single phase, from well below to well above the thermodynamic critical conditions. In almost all cases the nozzle throat conditions were two phase. The results indicate that the choked flow rates were not very sensitive to nozzle geometry. However, the axial pressure profiles, especially the throat pressure and the point of vaporization, were very sensitive to both nozzle geometry and operating conditions. A modified Henry-Fauske model correlated all the choked flow rate data to within + or - 10 percent. Neither the equilibrium model nor the Henry-Fauske model predicted throat pressures well over the whole range of data. Above the thermodynamic critical temperature the homogeneous equilibrium model was preferred for both flow rate and pressure ratio. The data of the three fluids could be normalized by the principle of corresponding states.
Download or read book Proceedings of the 19th International Cryogenic Enginering Conference ICEC 19 written by Guy Gistau Baguer and published by Alpha Science Int'l Ltd.. This book was released on 2003 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the Proceedings of the Nineteenth International Cryogenic Engineering Conference, Grenoble, France, 2002 Comprising 7 plenary papers and 185 contributed papers and posters dealing with the latest developments in all aspects of Cryogenics. The areas covered include: Large Scale Refrigeration and liquefaction Cryogenic Hydrodynamics Large Cryogenic Systems HTS and LTS Superconductor Applications Cryogen Storage and Distribution Cryogenic Components and Machinery Air and Gas Separation and Purification Cryogenic Instrumentation and Process Control Cryocoolers Cryogenic for Medicine and Biology Superfluid Helium Material and Fluid Properties Aerospace Cryogenics Heat Transfer and Thermal Insulation
Download or read book Report written by United States. National Bureau of Standards and published by . This book was released on 1968 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Research in the United States 1970 written by United States. National Bureau of Standards and published by . This book was released on 1971 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety in the Handling of Cryogenic Fluids written by Frederick J. Edeskuty and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of safety in any scientific endeavor is never in question. However, when cryogenic temperatures are involved, safety is especially important. In addition to observing the normal precautions, one must also take into account the variations of physical properties that occur at low temperatures. At these tempera tures, some properties not only exhibit large differences from their normal values but also can vary widely over a small temperature range. Before any cryogenic project is started, a thorough knowledge of the possible hazards is necessary. Only in this way can the safest operation be attained. Over the hundred-year history of cryogenic research, this has been shown to be the case. Keeping this requirement in mind is an essential ingredient in the quest for accident-free work. The past four or five decades have seen a great expansion of cryogenic technology. Cryogenic liquids, such as oxygen, nitrogen, hydrogen, and helium, have become commonly used in a number of different applications and are easily available in any part of the United States and, indeed, almost anywhere in the world. Not only are these liquids available, they have become less expensive and also available in ever larger quantities. As quantities increase, so also do the conse quences of mishaps. The future seems to hold promise of ever larger and more widespread use of the common cryogens. Thus, the importance of safety also increases as time progresses.
Download or read book Proceedings of the Sixteenth International Cryogenic Engineering Conference International Cryogenic Materials Conference written by T. Haruyama and published by Elsevier. This book was released on 1997-04-01 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 16th ICEC/ICMC Conference, held in Kitakyushu, Japan, on 20th-24th May 1996. The Proceedings are presented in three volumes containing a total of 476 papers from 1484 authors. The proceedings covers the main areas of: Large Scale Refrigeration. Cryocoolers. Cryogenic Engineering. Space Cryogenics. Application of Superconductivity. Oxide Superconductors. Metallic Superconductors. Metallic Materials. Non Metallic Materials.In addition there are seven Plenary Lectures covering such diverse topics as commercialization of high-Tc superconductors, the continuing development of the Maglev system in Japan, and the Large Hadron Collider project. The Proceedings comprise an excellent and up-to-date summary of research and development in the fields of Cryogenics and Superconductivity.