Download or read book Crude Oil Fouling written by Francesco Coletti and published by Gulf Professional Publishing. This book was released on 2014-11-20 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: With production from unconventional rigs continuing to escalate and refineries grappling with the challenges of shale and heavier oil feedstocks, petroleum engineers and refinery managers must ensure that equipment used with today's crude oil is protected from fouling deposits Crude Oil Fouling addresses this overarching challenge for the petroleum community with clear explanations on what causes fouling, current models and new approaches to evaluate and study the formation of deposits, and how today's models could be applied from lab experiment to onsite field usability for not just the refinery, but for the rig, platform, or pipeline. Crude Oil Fouling is a must-have reference for every petroleum engineer's library that gives the basic framework needed to analyze, model, and integrate the best fouling strategies and operations for crude oil systems. - Defines the most critical variables and events that cause fouling - Explains the consequences of fouling and its impact on operations, safety, and economics - Provides the technical models available to better predict and eliminate the potential for fouling in any crude system
Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining
Download or read book Handbook of Petroleum Processing written by Steven A. Treese and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crude Oil Chemistry written by Vasily Simanzhenkov and published by CRC Press. This book was released on 2003-08-12 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crude Oil Chemistry is foremost a scientifically exact guide to the full family of classical and modern analytical and process technologies in petroleum refining. In widening its vision also to incorporate a geological history of petroleum formation, present-day geopolitical and economic issues, and approaches to redress and improve the delicate ties between the petroleum industry and the environment, this reference succeeds as a total representation of the factors going into the chemistry of crude oil and their outward bound ramifications. The book thoroughly evaluates the chemistry and processing of low API gravity high-sulfur heavy crude oil increasingly relied on in the industry.
Download or read book Springer Handbook of Petroleum Technology written by Chang Samuel Hsu and published by Springer. This book was released on 2017-12-20 with total page 1243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive but concise reference resource for the vast field of petroleum technology. Built on the successful book "Practical Advances in Petroleum Processing" published in 2006, it has been extensively revised and expanded to include upstream technologies. The book is divided into four parts: The first part on petroleum characterization offers an in-depth review of the chemical composition and physical properties of petroleum, which determine the possible uses and the quality of the products. The second part provides a brief overview of petroleum geology and upstream practices. The third part exhaustively discusses established and emerging refining technologies from a practical perspective, while the final part describes the production of various refining products, including fuels and lubricants, as well as petrochemicals, such as olefins and polymers. It also covers process automation and real-time refinery-wide process optimization. Two key chapters provide an integrated view of petroleum technology, including environmental and safety issues.Written by international experts from academia, industry and research institutions, including integrated oil companies, catalyst suppliers, licensors, and consultants, it is an invaluable resource for researchers and graduate students as well as practitioners and professionals.
Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.
Download or read book Handbook of Petroleum Refining written by James G. Speight and published by CRC Press. This book was released on 2016-10-26 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum refining involves refining crude petroleum as well as producing raw materials for the petrochemical industry. This book covers current refinery processes and process-types that are likely to come on-stream during the next three to five decades. The book includes (1) comparisons of conventional feedstocks with heavy oil, tar sand bitumen, and bio-feedstocks; (2) properties and refinability of the various feedstocks; (3) thermal processes versus hydroprocesses; and (4) the influence of refining on the environment.
Download or read book Handbook of Pollution Prevention and Cleaner Production Vol 1 Best Practices in the Petroleum Industry written by Nicholas P Cheremisinoff and published by William Andrew. This book was released on 2009-09-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new Handbook provides a series of reference guides to cleaner production methods, technologies, and practices for key industry sectors. Each volume covers, for each industry sector: * the manufacturing technologies * waste management * pollution * methods for estimating and reporting emissions * treatment and control technologies * worker and community health risk exposures * cost data for pollution management * cleaner production and prevention alternatives Best Practices in The Petroleum Industry provides an overview of refineries and gas plant operations and identifies the key Environmental Aspects, supported by case studies of major incidents that resulted in catastrophic releases of oil and refined products, and a critical assessment of the methodology and calculation procedures that the industry relies on in preparing emissions inventories. The authors offer alternative approaches to providing more accurate emissions estimates, and guidelines on cleaner production and pollution prevention practices for improving overall environmental performance. - Overview of the key Environmental Aspects of gas plant operations and refineries - Case studies of major incidents that resulted in catastrophic releases of oil and refined products, including the Santa Barbara oil spill of 1969 and the EXXON Valdez incident - Provides guidelines on cleaner production and pollution prevention practices for improving overall environmental performance
Download or read book Petroleum Refining written by James H. Gary and published by CRC Press. This book was released on 2007-03-05 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum refiners must face billion-dollar investments in equipment in order to meet ever-changing environmental requirements. Because the design and construction of new processing units entail several years’ lead time, refiners are reluctant to commit these dollars for equipment that may no longer meet certain conditions when the units come on stream. Written by experts with both academic and professional experience in refinery operation, design, and evaluation, Petroleum Refining Technology and Economics, Fifth Edition is an essential textbook for students and a vital resource for engineers. This latest edition of a bestselling text provides updated data and addresses changes in refinery feedstock, product distribution, and processing requirements resulting from federal and state legislation. Providing a detailed overview of today’s integrated fuels refinery, the book discusses each major refining process as they relate to topics such as feedstock preparation, operating costs, catalysts, yields, finished product properties, and economics. It also contains end-of-chapter problems and an ongoing case study.
Download or read book Distillation Design written by Henry Z. Kister and published by McGraw-Hill Companies. This book was released on 1992-02-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing coverage of design principles for distillation processes, this text contains a presentation of process and equipment design procedures. It also highlights limitations of some design methods, and offers guidance on how to overcome them.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Refinery Process Modeling written by Y. A. Liu and published by John Wiley & Sons. This book was released on 2018-02-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the theory and practice of the simulation and optimization of the petroleum refining processes Petroleum Refinery Process Modeling offers a thorough review of how to quantitatively model key refinery reaction and fractionation processes. The text introduces the basics of dealing with the thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling. The authors - three experts on the topic - outline the procedures and include the key data required for building reaction and fractionation models with commercial software. The text shows how to filter through the extensive data available at the refinery and using plant data to begin calibrating available models and extend the models to include key fractionation sub-models. It provides a sound and informed basis to understand and exploit plant phenomena to improve yield, consistency, and performance. In addition, the authors offer information on applying models in an overall refinery context through refinery planning based on linear programming. This important resource: -Offers the basic information of thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling -Uses the key concepts of fractionation lumps and physical properties to develop detailed models and workflows for atmospheric (CDU) and vacuum (VDU) distillation units -Discusses modeling FCC, catalytic reforming and hydroprocessing units Written for chemical engineers, process engineers, and engineers for measurement and control, this resource explores the advanced simulation tools and techniques that are available to support experienced and aid new operators and engineers.
Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.
Download or read book Petroleum Refining Design and Applications Handbook Volume 1 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2018-08-09 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. With so many changes over the last few decades in equipment and processes, petroleum refining is almost a living document, constantly needing updating. With no new refineries being built, companies are spending their capital re-tooling and adding on to existing plants. Refineries are like small cities, today, as they grow bigger and bigger and more and more complex. A huge percentage of a refinery can be changed, literally, from year to year, to account for the type of crude being refined or to integrate new equipment or processes. This book is the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world's foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.
Download or read book Distillation written by Johann G. Stichlmair and published by Wiley-VCH. This book was released on 1998-09-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely thorough and up-to-date guide to modern distillation methods and their applications Distillation has been used for separating liquid mixtures for more than two thousand years, and it continues to be the most widely used separation technique in key industries throughout the industrialized world. Although the basic principles have remained the same since the days of the ancient Egyptians, new distillation and distillation control methods continue to be developed to satisfy a variety of highly specialized requirements. Encyclopedic in scope, this book provides distillation technicians with a uniquely comprehensive, up-to-date account of distillation methods currently employed in the oil, petrochemical, chemical, and pharmaceutical industries. The authors begin by acquainting readers with the principles of vapor-liquid equilibrium and the essential calculations for determining phase equilibria and equilibrium curves. Subsequent chapters are devoted to practical discussions of virtually all modern distillation methods, including batch, single stage, multistage continuous, multistage batch, and others. A wide array of industrial applications are described, including everything from crude oil distillation and argon recovery from air to water purification and ammonia recovery from wastewater. Special sections deal with the separation of azeotropic mixtures and the energy demand of distillation processes. Concluding chapters are devoted to detailed, extremely well illustrated descriptions of practical equipment design and modern distillation control methods. Distillation: Principles and Practice is an indispensable working resource for distillation technicians working in the oil, petrochemical, chemical, and pharmaceutical industries.
