Download or read book Cross Laminated Timber written by Nic Crawley and published by Routledge. This book was released on 2021-03-01 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cross-laminated timber (CLT) has long been heralded as a wonder material, with a light environmental footprint, high strength, quick installation times and reduced waste – so why isn’t everyone using it? Delving into the key considerations including fire safety, cost and value, visual aspects, planning, feasibility and engineering, this book is an essential companion to designing and delivering exemplar CLT buildings. Abundantly illustrated with over 130 colour images and in-depth case studies from around the world, it will help the entire project team - whether design team, constructor or clients - to better understand and build using a truly modern method of construction. Outlines key challenges as well as benefits of CLT, including quality, cost and environmental benefits, risk reduction and health and safety benefits Presents lessons learnt to aid the development process, from the earliest stages of design to production and assembly Accessible, easy-to-read handbook format allows you to dip in and out, investigating issues as necessary Multidisciplinary in approach with contributions from a range of practitioners
Download or read book CLT Handbook written by Erol Karacabeyli and published by . This book was released on 2013-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cross Laminated Timber Design Structural Properties Standards and Safety written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-03-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Master the practice of designing structures with cross-laminated timber This comprehensive guide explains the design standards, safety protocols, and codes and regulations engineers need to know to use cross-laminated timber as a structural building material. Featuring contributions from experts in the field, Cross-Laminated Timber Design: Structural Properties, Standards, and Safety introduces the material properties of CLT and goes on to cover the recommended lateral and vertical design techniques. You will get clear explanations of all relevant NDS, ASCE 7, and IBC provisions along with real-world examples and case studies. Sustainability and environmental issues are discussed in full detail. Coverage includes: • An introduction to cross-laminated timber • Product standards for cross-laminated timber • Structural design—gravity • Structural design—lateral • Structural connections • Building envelope design with cross-laminated timber • Acoustics for CLT projects • Fire for CLT projects • Environmental aspects of CLT as a construction material • Sustainability of cross-laminated timber
Download or read book Cross laminated Timber written by Exova BM TRADA. and published by . This book was released on 2017 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 100 Projects UK CLT written by Waugh Thistleton Architects and published by . This book was released on 2018 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The benefits of cross-laminated timber (CLT) are clear: building in timber is quick, clean, and easy. It can be achieved with a measured accuracy and lack of noise, waste, or need for material storage space. This book is a study of the 100 of the most significant buildings constructed from CLT in the United Kingdom over the past 15 years. Authors Andrew Waugh and Anthony Thistleton of Waugh Thistleton Architects have contacted a wide range of individuals and businesses to interview them about their experiences building in CLT to help inform this book." -- Thinkwood.com.
Download or read book Blank written by Jennifer Bonner and published by Applied Research & Design. This book was released on 2021-10 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book weaves a much needed and transformational narrative about making architecture through paying close attention to cross-laminated timber as a material for today. The material becomes the site of experimentation, innovation, and research in search of specific meanings of CLT in architecture at various scales by selecting the "CLT Blank" as the building unit. The structure of the book brings together work and texts from a diverse group of theorists and practitioners, who make material central to their inquiry, to suggest design approaches that will broaden the cultural, spatial, and technological significance for architecture, education, engineering, and industry. The outcome focuses on materiality through fast slippages between art, architecture, and science, that we hope will invigorate and expand new discourse to act as an antidote to the current conversations about the material, that is fixated on its making and mass production, disappointingly portraying it as a bland and lifeless product--a notion we want to be distant from in preference to seeking areas we feel were not yet conceptualized or theorized. The potential to see the spatial properties of its use and what kind of world that might suggest is shown in the book, with selected striking visual materials, to reposition its architecture though new forms of representation and responses that continue to stay in touch with pragmatics. Aesthetics of CLT with a connection to wood and art practice is a central thread though the book.
Download or read book Timber Engineering written by Sven Thelandersson and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.
Download or read book Dowel Bearing Strength written by Thomas Lee Wilkinson and published by . This book was released on 1991 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CIGOS 2019 Innovation for Sustainable Infrastructure written by Cuong Ha-Minh and published by Springer Nature. This book was released on 2019-10-10 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the 5th International Conference on Geotechnics, Civil Engineering Works and Structures, held in Ha Noi, focusing on the theme “Innovation for Sustainable Infrastructure”, aiming to not only raise awareness of the vital importance of sustainability in infrastructure development but to also highlight the essential roles of innovation and technology in planning and building sustainable infrastructure. It provides an international platform for researchers, practitioners, policymakers and entrepreneurs to present their recent advances and to exchange knowledge and experience on various topics related to the theme of “Innovation for Sustainable Infrastructure”.
Download or read book Mass Timber written by Susan Jones and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass Timber / Design and Research presents new research and design work with Mass Timber, a new construction technology, well-known in Europe, but relatively unfamiliar in the United States. Leading the Mass Timber design dialogue in the US, the author, Susan Jones, an architect in Seattle, Washington, has been pioneering the new, innovative use of wood over the past six years, since she built her own family's house from cross-laminated timber in 2015 in a neighborhood in Seattle. The book presents her Seattle firm, her family, and her University of Washington students' years of research and design. Opening with the story of three generations of her family's own sustainable forest practices, the book presents research into Pacific Northwest forestry, timber and Cross-Laminated Timber manufacturing practices, to carbon analysis and carbon comparisons between standard building construction assemblies and technologies; and concludes with the design of model buildings both designed and built by her firm, atelierjones and her University of Washington students: including a single-family house, a church, schools, multi-family housing, and a twelve-story Tall Timber Wood Innovation tower on the University of Washington campus in Seattle.
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Timber in the City written by Alan Organschi and published by . This book was released on 2015-04-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: As synthetic materials and mutant and hybrid concoctions attain prominence in our daily lives—in our handheld devices, cooking utensils, vehicles, even things as simple as our shopping bags—the design and construction industries have instead re-embraced the familiar, the conventional—wood, which has regained prominence through innovations in engineering and construction methodologies. Technology is now commonly used—and often (though not always) affordably used—to cut, perforate, assemble, erect, and even fabricate materials in a manner not previously possible. Wood is one such material, and Timber in the City documents both the imaginings of those in the nascence of their education and practice and the executed work of design professionals at the leading edge of architecture. These designers, regardless of the duration of their immersion in the field, have imaginatively rethought the means by which we build and the methods by which we define space merely through differing deployments of a familiar building material.
Download or read book Structural Engineering Handbook Fifth Edition written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-04-17 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The industry-standard guide to structural engineering—fully updated for the latest advances and regulations For 50 years, this internationally renowned handbook has been the go-to reference for structural engineering specifications, codes, technologies, and procedures. Featuring contributions from a variety of experts, the book has been revised to align with the codes that govern structural design and materials, including IBC, ASCE 7, ASCE 37, ACI, AISC, AASHTO, NDS, and TMS. Concise, practical, and user-friendly, this one-of-a-kind resource contains real-world examples and detailed descriptions of today’s design methods. Structural Engineering Handbook, Fifth Edition, covers: • Computer applications in structural engineering • Earthquake engineering • Fatigue, brittle fracture, and lamellar tearing • Soil mechanics and foundations • Design of steel structural and composite members • Plastic design of steel frames • Design of cold-formed steel structural members • Design of aluminum structural members • Design of reinforced- and prestressed-concrete structural members • Masonry construction and timber structures • Arches and rigid frames • Bridges and girder boxes • Building design and considerations • Industrial and tall buildings • Thin-shell concrete structures • Special structures and nonbuilding structures
Download or read book Tall Wood Buildings written by Michael Green and published by Birkhauser. This book was released on 2017-01-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tall Wood buildings' have been at the foreground of innovative building practice for a number of years. From London to Stockholm, from Vancouver to Melbourne timber buildings of up to 20 storeys have been built or designed. This publication explains the typical construction types and documents an international selection of 13 case studies with many specially prepared construction drawings, demonstrating the range of the technology.
Download or read book Solid Wood written by Joseph Mayo and published by Routledge. This book was released on 2015-10-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 10-15 years a renaissance in wood architecture has occurred with the development of new wood building systems and design strategies, elevating wood from a predominantly single-family residential idiom to a rival of concrete and steel construction for a variety of building types, including high rises. This new solid wood architecture offers unparalleled environmental as well as construction and aesthetic benefits, and is of growing importance for professionals and academics involved in green design. Solid Wood provides the first detailed book which allows readers to understand new mass timber/massive wood architecture. It provides: historical context in wood architecture from around the world a strong environmental rationale for the use of wood in buildings recent developments in contemporary fire safety and structural issues insights into building code challenges detailed case studies of new large-scale wood building systems on a country-by-country basis. Case studies from the UK, Norway, Sweden, Germany, Austria, Italy, Canada, the United States, New Zealand and Australia highlight design strategies, construction details and unique cultural attitudes in wood design. The case studies include the most ambitious academic, hospitality, industrial, multi-family, and wood office buildings in the world. With discussions from leading architectural, engineering, and material manufacturing firms in Europe, North America and the South Pacific, Solid Wood disrupts preconceived notions and serves as an indispensable guide to twenty-first century wood architecture and its environmental and cultural benefits.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book CIGOS 2021 Emerging Technologies and Applications for Green Infrastructure written by Cuong Ha-Minh and published by Springer Nature. This book was released on 2021-10-28 with total page 1861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the key role of green infrastructure (GI) in providing natural and ecosystem solutions, helping alleviate many of the environmental, social, and economic problems caused by rapid urbanization. The book gathers the emerging technologies and applications in various disciplines involving geotechnics, civil engineering, and structures, which are presented in numerous high-quality papers by worldwide researchers, practitioners, policymakers, and entrepreneurs at the 6th CIGOS event, 2021. Moreover, by sharing knowledge and experiences around emerging GI technologies and policy issues, the book aims at encouraging adoption of GI technologies as well as building capacity for implementing GI practices at all scales. This book is useful for researchers and professionals in designing, building, and managing sustainable buildings and infrastructure.
