Download or read book Critical Analysis of SiC SIT Design and Performance Based Upon Material and Device Properties written by YunMo Sung and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, the need for high power, high frequency devices continues to grow with the increase in wireless communication, radar systems, HDTV, digital communication, and other military application of the RF spectrum. Traditionally when higher power is needed, one needs to either combine the output power of multiple devices or use vacuum tubes, which are still uncontested at very high power levels, capable of up to a few hundred kilowatts at 5 GHz [11]. But wide band gap semiconductor devices capable of competing in this application. Moreover, the static induction transistor (SIT) in silicon carbide can provide very high total power at microwave frequency. This is due to the vertical structure of the SIT which consists of a vertical channel that is defined by a mesa with gate electrodes of the Schottky type to control the current between a top side source contact and a drain contact on the backside of the wafer. This thesis demonstrates that through careful modeling by means of simulations and inclusion of all significant device physics, good agreement is reached between theoretical prediction and simulation results. It is shown in particular that by careful choice of the device critical parameters, such as mesa width, gate length, and contact resistance, SIT should be able to obtain cut-off frequency up to 42 GHz and shown temperature simulation results of SIT.
Download or read book Critical Analysis of SiC Design and Performance Based Upon Material and Device Propertyies written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, the need for high power, high frequency devices continues to grow with the increase in wireless communication, radar systems, HDTV, digital communication, and other military application of the RF spectrum. Traditionally when higher power is needed, one needs to either combine the output power of multiple devices or use vacuum tubes, which are still uncontested at very high power levels, capable of up to a few hundred kilowatts at 5 GHz [11]. But wide band gap semiconductor devices capable of competing in this application. Moreover, the static induction transistor (SIT) in silicon carbide can provide very high total power at microwave frequency. This is due to the vertical structure of the SIT which consists of a vertical channel that is defined by a mesa with gate electrodes of the Schottky type to control the current between a top side source contact and a drain contact on the backside of the wafer. This thesis demonstrates that through careful modeling by means of simulations and inclusion of all significant device physics, good agreement is reached between theoretical prediction and simulation results. It is shown in particular that by careful choice of the device critical parameters, such as mesa width, gate length, and contact resistance, SIT should be able to obtain cut-off frequency up to 42 GHz and shown temperature simulation results of SIT.
Download or read book Development of High Temperature High Power High Efficiency High Voltage Converters Using Silicon Carbide SiC Delivery Order Delivery Order 0002 Critical Analysis of SiC VJFET Design and Performance Based Upon Material and Device Properties written by and published by . This book was released on 2005 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide as a semiconductor material possesses several significant physical properties which make it superior for applications to high power devices. This report documents the efforts to develop, demonstrate, and optimize the design and fabrication methodologies for the realization of power vertical junction field effect transistors in the 4H-polytype of silicon carbide. Theoretical prediction and modeling simulation, incorporating all the significant SiC specific device physics, are utilized to develop a design methodology which is to ultimately be used for device fabrication. The results illustrate that good agreement between theoretical prediction and accurately modeled simulations can be achieved and enable the forecasting of device performance as a function of temperature, design modification, and variations in material transport characteristics.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Innovations in Army Energy and Power Materials Technologies written by Edward C. Shaffer and published by Materials Research Forum LLC. This book was released on 2018-09-20 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium reports fundamental science and engineering advances of the US Army Research Labratory (ARL) within the area of Energy and Power technologies. Although, in general, ARL's Materials Research encompasses a broad range of materials technologies (e.g.: Photonics, Electronics, Biological and Bio-inspired Materials, Structural Materials, High Strain and Ballistic Materials, and Manufacturing Science), this publication specifically addresses selected energy and power material related work at ARL. While this work includes electrochemical energy storage (batteries and capacitors) and electrochemical energy conversion (fuel cells, photoelectrochemistry, and photochemistry), special emphasis is given on electrochemical energy storage: • Micro Electro-Mechanical Systems (MEMS): Power density, efficiency, and robustness of motors, generators, and actuators while also reducing their life cycle costs. • Energy Storage: Electrical and electrochemical energy storage devices to decrease device size, weight, and cost as well as increase their capabilities in extreme temperatures and operating conditions. • Power Control and Distribution: Tactical, deployable power systems using conventional fuels, alternative fuels, and energy harvested from renewable/ambient sources. • Power Generation/Energy Conversion: Smart energy networks for platforms, forward operating bases, and facilities using modeling and simulation tools as well as new, greater capability and efficiency components. • Thermal Transport and Control: Heat and higher power density systems, advanced components, system modeling, and adaptive or hybrid-cycle technologies. Keywords: Electrochemical Energy Storage, Batteries, Capacitors, Electrochemical Energy Conversion, Fuel Cells, Photoelectrochemistry, Photochemistry, High Voltage Electrolytes, Li-ion Batteries, Li-ion Chemistry, Lithium–Sulphur Batteries, Nuclear Metastables, Pyroelectric Energy Conversion, Charged Quantum Dots, High-Efficiency Photovoltaics, IR Sensing, GaN Power Schottky Diodes, Threshold-Voltage Instability, Reliability Testing, SiC MOSFETs, Power Electronics Packaging, High Voltage 4H-SiC GTOs, Silicon Carbide, Avalanche Breakdown Diode, SiC PiN Diodes, Thyristor Protection, Compact DC-DC Battery Chargers
Download or read book Power Electronics Semiconductor Devices written by Robert Perret and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates the recent developments in several key electrical engineering R&D labs, concentrating on power electronics switches and their use. The first sections deal with key power electronics technologies, MOSFETs and IGBTs, including series and parallel associations. The next section examines silicon carbide and its potentiality for power electronics applications and its present limitations. Then, a dedicated section presents the capacitors, key passive components in power electronics, followed by a modeling method allowing the stray inductances computation, necessary for the precise simulation of switching waveforms. Thermal behavior associated with power switches follows, and the last part proposes some interesting prospectives associated to Power Electronics integration.
Download or read book Amorphous and Crystalline Silicon Carbide II written by Mahmud M. Rahman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains written versions of the papers presented at the Second Inter national Conference on Amorphous and Crystalline Silicon Carbide and Related Materials (ICACSC 1988), which was held at Santa Clara University on Decem ber 15 and 16, 1988. The conference followed the First ICACSC held at Howard University, Washington DC, in December 1987 and continued to provide an in ternational forum for discussion and exchange of ideas and results covering the current status of research on SiC and related materials. ICACSC 1988 attracted 105 participants from five countries. The substantial increase in the number of papers compared with the previous year is an indication of the growing interest in this field. Of the 45 papers presented at the conference, 36 refereed manuscripts are included in this volume, while the remaining 9 appear as abstracts. The six invited papers provide detailed reviews of recent results on amorphous and crystalline silicon carbide materials and devices, as well as diamond thin films. The volume is divided into six parts, each covering an important theme of the conference.
Download or read book SiC Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2007 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide is known to have been investigated since 1907 when Captain H J Round demonstrated yellow and blue emission by applying bias between a metal needle and an SiC crystal. The potential of using SiC in semiconductor electronics was already recognized half a century ago. Despite its well-known properties, it has taken a few decades to overcome the exceptional technological difficulties of getting silicon carbide material to reach device quality and travel the road from basic research to commercialization.This second of two volumes reviews four important additional areas: the growth of SiC substrates; the deep defects in different SiC polytypes, which after many years of research still define the properties of bulk SiC and the performance and reliability of SiC devices; recent work on SiC JFETs; and the complex and controversial issues important for bipolar devices.Recognized leaders in the field, the contributors to this volume provide up-to-date reviews of further state-of-the-art areas in SiC technology and materials and device research.
Download or read book Microwave Active Circuit Analysis and Design written by Clive Poole and published by Academic Press. This book was released on 2015-11-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the skills and knowledge required by today’s RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts Contains tutorial questions and problems allowing readers to test their knowledge An accompanying website containing supporting material in the form of slides and software (MATLAB) listings Unique material on negative resistance oscillator design, noise analysis and three-port design techniques Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advancing Silicon Carbide Electronics Technology II written by Konstantinos Zekentes and published by Materials Research Forum LLC. This book was released on 2020-03-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an in-depth review and analysis of Silicon Carbide device processing. The main topics are: (1) Silicon Carbide Discovery, Properties and Technology, (2) Processing and Application of Dielectrics in Silicon Carbide Devices, (3) Doping by Ion Implantation, (4) Plasma Etching and (5) Fabrication of Silicon Carbide Nanostructures and Related Devices. The book is also suited as supplementary textbook for graduate courses. Keywords: Silicon Carbide, SiC, Technology, Processing, Semiconductor Devices, Material Properties, Polytypism, Thermal Oxidation, Post Oxidation Annealing, Surface Passivation, Dielectric Deposition, Field Effect Mobility, Ion Implantation, Post Implantation Annealing, Channeling, Surface Roughness, Dry Etching, Plasma Etching, Ion Etching, Sputtering, Chemical Etching, Plasma Chemistry, Micromasking, Microtrenching, Nanocrystal, Nanowire, Nanotube, Nanopillar, Nanoelectromechanical Systems (NEMS).
Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world
Download or read book ISPSD 98 written by and published by . This book was released on 1998 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electronics in Renewable Energy Systems and Smart Grid written by Bimal K. Bose and published by John Wiley & Sons. This book was released on 2019-06-27 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive and authoritative guide to power electronics in renewable energy systems Power electronics plays a significant role in modern industrial automation and high- efficiency energy systems. With contributions from an international group of noted experts, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers a comprehensive review of the technology and applications of power electronics in renewable energy systems and smart grids. The authors cover information on a variety of energy systems including wind, solar, ocean, and geothermal energy systems as well as fuel cell systems and bulk energy storage systems. They also examine smart grid elements, modeling, simulation, control, and AI applications. The book's twelve chapters offer an application-oriented and tutorial viewpoint and also contain technology status review. In addition, the book contains illustrative examples of applications and discussions of future perspectives. This important resource: Includes descriptions of power semiconductor devices, two level and multilevel converters, HVDC systems, FACTS, and more Offers discussions on various energy systems such as wind, solar, ocean, and geothermal energy systems, and also fuel cell systems and bulk energy storage systems Explores smart grid elements, modeling, simulation, control, and AI applications Contains state-of-the-art technologies and future perspectives Provides the expertise of international authorities in the field Written for graduate students, professors in power electronics, and industry engineers, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers an up-to-date guide to technology and applications of a wide-range of power electronics in energy systems and smart grids.
Download or read book Commerce Business Daily written by and published by . This book was released on 1997-12-31 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
