Download or read book Creep and Creep Fatigue Intergranular Damage in Austenitic Stainless Steels written by J. Grattier and published by . This book was released on 1988 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and strain controlled low-cycle fatigue tests with an imposed hold time at maximum tensile strain were carried out, mainly at 600°C, on two heats of 316L stainless steel. Very long times to failure (? 104 h) corresponding to low applied strain and long dwell period (24 h) were investigated. Both fatigue and creep damage were measured by quantitative metallography.

Download or read book High Temperature Fatigue Behaviour of Austenitic Stainless Steel written by Hugo Wärner and published by Linköping University Electronic Press. This book was released on 2018-12-20 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global energy consumption is increasing and together with global warming from greenhouse gas emission, create the need for more environmental friendly energy production processes. Higher efficiency of biomass power plants can be achieved by increasing temperature and pressure in the boiler section and this would increase the generation of electricity along with the reduction in emission of greenhouse gases e.g. CO2. The power generation must also be flexible to be able to follow the demands of the energy market, this results in a need for cyclic operating conditions with alternating output and multiple start-ups and shut-downs. Because of the demands of flexibility, higher temperature and higher pressure in the boiler section of future biomass power plants, the demands on improved mechanical properties of the materials of these components are also increased. Properties like creep strength, thermomechanical fatigue resistance and high temperature corrosion resistance are critical for materials used in the next generation biomass power plants. Austenitic stainless steels are known to possess such good high temperature properties and are relatively cheap compared to the nickel-base alloys, which are already operating at high temperature cyclic conditions in other applications. The behaviour of austenitic stainless steels during these widened operating conditions are not yet fully understood. The aim of this licentiate thesis is to increase the knowledge of the mechanical behaviour at high temperature cyclic conditions for austenitic stainless steels. This is done by the use of thermomechanical fatigue- and creepfatigue testing at elevated temperatures. For safety reasons, the effect of prolonged service degradation is investigated by pre-ageing before mechanical testing. Microscopy is used to investigate the microstructural development and resulting damage behaviour of the austenitic stainless steels after testing. The results show that creep-fatigue interaction damage, creep damage and oxidation assisted cracking are present at high temperature cyclic conditions. In addition, simulated service degradation resulted in a detrimental embrittling effect due to the deterioration by the microstructural evolution.

Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessment of High Temperature Low Cycle Fatigue Life of Austenitic Stainless Steels by Using Intergranular Damage as a Correlating Parameter written by C. Levaillant and published by . This book was released on 1982 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain-controlled continuous fatigue and creep-fatigue experiments are reported for two types of 316 steel tested at 600°C (1112°F). It is shown that, although the continuous fatigue properties of the two materials are very similar, the one containing a controlled amount of nitrogen exhibits a better creep-fatigue resistance than the other alloy. Detailed measurements of intergranular damage made either on the fracture surfaces or in the bulk of creep-fatigue specimens indicate that the susceptibility of the materials to the effect of tensile hold times can be related to their propensity to intergranular cracking. A stress relaxation-propagation reduction factor per cycle correlation is proposed in order to account for the detrimental effect of tensile hold times on the fatigue life. This correlation relies upon experimental results on austenitic stainless steels published in the literature. It is shown that the proposed approach, derived largely from the quantitative measurement of intergranular damage, holds some promise for predictive purposes.

Download or read book Fatigue at High Temperature written by R. P. Skelton and published by . This book was released on 1983 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Austenitic Stainless Steels written by P. Marshall and published by Springer Science & Business Media. This book was released on 1984-07-31 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading experts in the field, this book (which is complementary to Fatigue of Materials and Structures: Application to Damage and Design, also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. The book deals with crack initiation, crack growth, low-cycle fatigue, gigacycle fatigue, shorts cracks, fatigue micromechanisms and the local approach to fatigue damage, corrosion fatigue, environmental effects and variable amplitude loadings, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of mechanical, structural, civil, design, nuclear, and aerospace engineering as well as materials science.

Download or read book Creep Fatigue Fracture Analysis of Internal Damage written by Weisheng Zhou and published by Springer Nature. This book was released on with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Creep fatigue written by Ryuichi Ohtani and published by . This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.

Download or read book Optimization and Security Challenges in Smart Power Grids written by Vijay Pappu and published by Springer Science & Business Media. This book was released on 2013-11-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of state-of-the-art research on “Systems and Optimization Aspects of Smart Grid Challenges.” The authors have compiled and integrated different aspects of applied systems optimization research to smart grids, and also describe some of its critical challenges and requirements. The promise of a smarter electricity grid could significantly change how consumers use and pay for their electrical power, and could fundamentally reshape the current Industry. Gaining increasing interest and acceptance, Smart Grid technologies combine power generation and delivery systems with advanced communication systems to help save energy, reduce energy costs and improve reliability. Taken together, these technologies support new approaches for load balancing and power distribution, allowing optimal runtime power routing and cost management. Such unprecedented capabilities, however, also present a set of new problems and challenges at the technical and regulatory levels that must be addressed by Industry and the Research Community.

Download or read book Grain Boundaries and Crystalline Plasticity written by Louisette Priester and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to put forward the fundamental role of grain boundaries in the plasticity of crystalline materials. To understand this role requires a multi-scale approach to plasticity: starting from the atomic description of a grain boundary and its defects, moving on to the elemental interaction processes between dislocations and grain boundaries, and finally showing how the microscopic phenomena influence the macroscopic behaviors and constitutive laws. It involves bringing together physical, chemical and mechanical studies. The investigated properties are: deformation at low and high temperature, creep, fatigue and rupture.

Download or read book Mechanical Behaviour of Materials at High Temperature written by C. Moura Branco and published by Springer Science & Business Media. This book was released on 1996-06-30 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the edited version of lectures and selected research contributions presented at the NATO ADVANCED STUDY INSTITUTE on MECHANICAL BEHA VI OUR OF MATERIALS AT HIGH TEMPERATURE, held in Sesimbra, Portugal, 12th-22nd September 1995, and organized by 1ST-Lisbon Institute of Technology, PortugaL The Institute was attended by 88 participants, including 15 lecturers from 17 countries including five CP countries. The lecturers were leading scientists and technologists from universities, research institutions and industry. The students were mainly young PhD students and junior academic or research staff with postgraduate qualifications (MSc or PhD). Fourteen students were from the five CP countries. The students presented research papers or posters during the Institute reporting the current progress of their research projects. A total of thirty three lectures, ten research papers and fifty posters were presented. This book does not contain the poster presentations and seven research papers were selected for publication. All the sessions were very active and quite extensive discussions on scientific aspects took place during the Institute. The Advanced Study Institute provided a forum for interaction among scientists and engineers from different areas of research, and young researchers.

Download or read book Low cycle Fatigue and Life Prediction written by Claude Amzallag and published by ASTM International. This book was released on 1982 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ductility Normalized strainrange Partitioning Life Relations for Creep fatigue Life Predictions written by Gary R. Halford and published by . This book was released on 1977 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theoretical and Applied Mechanics written by P. Germain and published by Elsevier. This book was released on 2012-12-02 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contained in this volume are the full texts of the invited general and sectional lectures presented at this conference. The entire field of mechanics is covered, including analytical, solid and fluid mechanics and their applications. Invited papers on the following topics are also presented: Mechanics of large deformation and damage; The dynamics of two-phase flows; Mechanics of the earth's crust.The papers are written by leading experts and provide a valuable key to the latest and most important developments in various sub-fields of mechanics.

Download or read book Low Cycle Fatigue and Elasto Plastic Behaviour of Materials 3 written by K.T. Rie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceeds of the Third International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, Berlin Congress Center, Berlin, Germany, 7-11 September 1992