Download or read book Surface crack Growth written by Walter G. Reuter and published by ASTM International. This book was released on 1990 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the symposium (on title) held in Sparks, Nevada, April 1988. Twenty-two peer-reviewed papers are divided into sections on models and experiments (monotonic loading), and fatigue crack growth. Areas addressed include the differences in constraint for 2-D through-thickness cracks and 3-D surface
Download or read book Cracked Surface written by John-Michael Lander and published by . This book was released on 2020-08 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cracked Rotors written by Nicoló Bachschmid and published by Springer Science & Business Media. This book was released on 2010-07-12 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cracks can develop in rotating shafts and can propagate to relevant depths without affecting consistently the normal operating conditions of the shaft. In order to avoid catastrophic failures, accurate vibration analyses have to be performed for crack detection. The identification of the crack location and depth is possible by means of a model based diagnostic approach, provided that the model of the crack and the model of the cracked shaft dynamical behavior are accurate and reliable. This monograph shows the typical dynamical behavior of cracked shafts and presents tests for detecting cracks. The book describes how to model cracks, how to simulate the dynamical behavior of cracked shaft, and compares the corresponding numerical with experimental results. All effects of cracks on the vibrations of rotating shafts are analyzed, and some results of a numerical sensitivity analysis of the vibrations to the presence and severity of the crack are shown. Finally the book describes some crack identification procedures and shows some results in model based crack identification in position and depth. The book is useful for higher university courses in mechanical and energetic engineering, but also for skilled technical people employed in power generation industries.
Download or read book Construction of Full Scale Trials to Evaluate the Performance of Induced Cracked Cbm Roadbases written by S.J. Ellis and published by Thomas Telford. This book was released on 1999-02-19 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Executive Summary - Introduction - Literature review update - Methodology - Trial sites - Results obtained from initial monitioring - Dicussion - Conclusions and recommendations - Acknowledgements - References - Abbreviations - Appendix A: Draft specification for the induced cracking of cement bound materials roadboase pavements - Astract - Related publications
Download or read book Special Applications and Advanced Techniques for Crack Size Determination written by John J. Ruschau and published by ASTM International. This book was released on 1995 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprises ten papers discussing topics including methods for the measurement of surface crack size, multiple site cracking, and cracking under nonisothermal conditions using AC potential difference procedures; influences of crack deflection and crack splitting on DC potential calibrations; complianc
Download or read book Small crack Test Methods written by James M. Larsen and published by ASTM International. This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the most recent methods for testing small cracks in a variety of materials, providing detailed quantitative information on necessary procedures for data acquisition. Emphasizes the characterization of small, three-dimensional fatigue cracks, initiated either naturally or artificially. The ei
Download or read book Part Through Crack Fatigue Life Prediction written by J. B. Chang and published by ASTM International. This book was released on 1979 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plane Strain Crack Toughness Testing of High Strength Metallic Materials written by and published by ASTM International. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Analysis and Solutions of Crack Problems written by George C. Sih and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is weH known that the traditional failure criteria cannot adequately explain failures which occur at a nominal stress level considerably lower than the ultimate strength of the material. The current procedure for predicting the safe loads or safe useful life of a structural member has been evolved around the discipline oflinear fracture mechanics. This approach introduces the concept of a crack extension force which can be used to rank materials in some order of fracture resistance. The idea is to determine the largest crack that a material will tolerate without failure. Laboratory methods for characterizing the fracture toughness of many engineering materials are now available. While these test data are useful for providing some rough guidance in the choice of materials, it is not clear how they could be used in the design of a structure. The understanding of the relationship between laboratory tests and fracture design of structures is, to say the least, deficient. Fracture mechanics is presently at astandstill until the basic problems of scaling from laboratory models to fuH size structures and mixed mode crack propagation are resolved. The answers to these questions require some basic understanding ofthe theory and will not be found by testing more specimens. The current theory of fracture is inadequate for many reasons. First of aH it can only treat idealized problems where the applied load must be directed normal to the crack plane.
Download or read book SAE Transactions written by Society of Automotive Engineers and published by . This book was released on 1927 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning in 1985, one section is devoted to a special topic
Download or read book Mechanics of Fatigue Crack Closure written by Wolf Elber and published by ASTM International. This book was released on 1988 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crack Control written by Kevin Kendall and published by Elsevier. This book was released on 2020-10-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crack Control: Using Fracture Theory to Create Tough New Materials goes beyond just trying to understand the origin of cracks and fracture in materials by also providing readers with the knowledge and techniques required to stop cracks at the nano- and micro-levels, covering the fundamentals of crack propagation, prevention, and healing. The book starts by providing a concise foundational overview of cracks and fracture mechanics, then looks at real-life ways that new tougher materials have been developed via crack inhibition. Topics such as crack equilibrium, stress criterion, and stress equations are then outlined, as are methods for inventing new crack-resistant materials. The importance of crack healing is emphasized and cracks that grow under tension, bending, compression, crazing, and adhesion are discussed at length as well - Provides a better understanding of crack formation in various materials allowing for more efficient investigations of crack-based material or structural failure - Demonstrates how to prevent cracks by arresting them at the nano- and micro-levels - Looks at methods for developing new tougher and stronger materials through crack inhibition - Emphasizes the importance of crack healing and explains crack stopping through changing the peel shape in various ways
Download or read book Handbook of Fatigue Crack Propagation in Metallic Structures written by A. Carpinteri and published by Newnes. This book was released on 2012-12-02 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this Handbook is to provide a review of the knowledge and experiences in the field of fatigue fracture mechanics. It is well-known that engineering structures can fail due to cyclic loading. For instance, a cyclically time-varying loading reduces the structure strength and can provoke a fatigue failure consisting of three stages: (a) crack initiation (b) crack propagation and (c) catastrophic failure. Since last century many scientists have tried to understand the reasons for the above-mentioned failures and how to prevent them. This Handbook contains valuable contributions from leading experts within the international scientific community and covers many of the important problems associated with the fatigue phenomena in civil, mechanical and nuclear engineering.
Download or read book Fatigue Crack Growth written by Hans Albert Richard and published by Springer. This book was released on 2016-06-13 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a concise introduction to fatigue crack growth, based on practical examples. It discusses the essential concepts of fracture mechanics, fatigue crack growth under constant and variable amplitude loading and the determination of the fracture-mechanical material parameters. The book also introduces the analytical and numerical simulation of fatigue crack growth as well as crack initiation. It concludes with a detailed description of several practical case studies and some exercises. The target group includes graduate students, researchers at universities and practicing engineers.
Download or read book Shallow Crack Fracture Mechanics Toughness Tests and Applications written by Michael Graham Dawes and published by Woodhead Publishing. This book was released on 1992-01-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last decade there has been an increasing awareness that use of standards deeply notched fracture mechanics test specimens can result in substantial over-or-under-assessments of the real fracture toughness associated with shallow surface cracks.
Download or read book The Modern Asphalt Pavement written by Clifford Richardson and published by . This book was released on 1905 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin written by and published by . This book was released on 1919 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
