Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.

Download or read book Advances in Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear system is relatively unique on board an aircraft—it is both structure and machine, supporting the aircraft on the ground, yet providing functions such as energy absorption during landing, retraction, steering, and braking. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Additionally, papers discussing self-powered landing gear and more electrical overall aircraft architectures have been included. The content of Advances in Aircraft Landing Gear is divided into two sections: Analysis and Design Methods; and Electric Actuation, Control, and Taxi. For those looking for more information on aircraft landing gears, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by this committee appears in the appendix.

Download or read book Advances in Aircraft Brakes and Tires written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: An aircraft’s interface with the ground—through its wheels, tires, and brakes—is critical to ensure safe and reliable operation, demanding constant technology development. Significant advancements have occurred with almost all civil airliners entering service with radial tires, and with the Boeing 787 having entered service in 2011 with electrically actuated carbon-carbon brakes. This book is divided into three sections: tires, control systems, and brakes, presenting a selection of the most relevant papers published by SAE International on these matters in the past fifteen years. They have been chosen to provide significant interest to those engineers working in the landing gear field. With almost all current large civil aircraft (and many smaller aircraft) opting exclusively for carbon-carbon brakes, a number of papers addressing the challenges of this technology are included. Papers touching on tire behavior and papers discussing brake control strategies are provided. For those looking for more information on aircraft landing gears, brakes, and tires, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by the A-5 committee is included in the appendix.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1994 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1996 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Materials written by K. H. J. Buschow and published by . This book was released on 2001 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanyind CR-ROM conrtains The Encyclopedia of Materials Science and Technology on a web access disc.

Download or read book Aeronautical Enginnering A Cumulative Index to a Continuing Bibliography supplement 312 written by and published by . This book was released on 1994 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerospace Materials and Applications written by Biliyar N. Bhat and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The present volume is focused on documenting the novel processing, fabrication, characterization, and testing approaches that are unique to aerospace materials/structures/systems"--Preface.

Download or read book Aerospace Alloys written by Stefano Gialanella and published by Springer Nature. This book was released on 2019-10-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.

Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA.* All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry

Download or read book The Rocket Company written by Patrick J. G. Stiennon and published by AIAA. This book was released on 2005 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A fictionalized account of the challenges faced by a group of seven investors and their engineering team in developing a low-cost, reusable, Earth-to orbit launch vehicle. The marketing, regulatory, and technical problems are explored ... "cover p. [4].

Download or read book Gaseous Hydrogen Embrittlement of Materials in Energy Technologies written by Richard P Gangloff and published by Elsevier. This book was released on 2012-01-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern energy systems are reliant on the production, transportation, storage, and use of gaseous hydrogen. The safety, durability, performance and economic operation of these systems is challenged by operating-cycle dependent degradation by hydrogen of otherwise high performance materials. This important two-volume work provides a comprehensive and authoritative overview of the latest research into managing hydrogen embrittlement in energy technologies.Volume 1 is divided into three parts, the first of which provides an overview of the hydrogen embrittlement problem in specific technologies including petrochemical refining, automotive hydrogen tanks, nuclear waste disposal and power systems, and H2 storage and distribution facilities. Part two then examines modern methods of characterization and analysis of hydrogen damage and part three focuses on the hydrogen degradation of various alloy classesWith its distinguished editors and international team of expert contributors, Volume 1 of Gaseous hydrogen embrittlement of materials in energy technologies is an invaluable reference tool for engineers, designers, materials scientists, and solid mechanicians working with safety-critical components fabricated from high performance materials required to operate in severe environments based on hydrogen. Impacted technologies include aerospace, petrochemical refining, gas transmission, power generation and transportation. - Summarises the wealth of recent research on understanding and dealing with the safety, durability, performance and economic operation of using gaseous hydrogen at high pressure - Reviews how hydrogen embrittlement affects particular sectors such as the petrochemicals, automotive and nuclear industries - Discusses how hydrogen embrittlement can be characterised and its effects on particular alloy classes

Download or read book Impactful Times written by James R. Asay and published by Springer. This book was released on 2017-05-02 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a history of shock compression science, including development of experimental, material modeling, and hydrodynamics code technologies over the past six decades at Sandia National Laboratories. The book is organized into a discussion of major accomplishments by decade with over 900 references, followed by a unique collection of 45 personal recollections detailing the trials, tribulations, and successes of building a world-class organization in the field. It explains some of the challenges researchers faced and the gratification they experienced when a discovery was made. Several visionary researchers made pioneering advances that integrated these three technologies into a cohesive capability to solve complex scientific and engineering problems. What approaches worked, which ones did not, and the applications of the research are described. Notable applications include the turret explosion aboard the USS Iowa and the Shoemaker-Levy comet impact on Jupiter. The personal anecdotes and recollections make for a fascinating account of building a world-renowned capability from meager beginnings. This book will be inspiring to the expert, the non expert, and the early-career scientist. Undergraduate and graduate students in science and engineering who are contemplating different fields of study should find it especially compelling.

Download or read book Reactivity of Titanium with Oxygen written by W. A. Riehl and published by . This book was released on 1963 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was undertaken to develop information on which a knowledgeable decision could be based concerning the use of titanium for construction of thin walled LOX tanks. The primary goals were to investigate the reactions of titanium alloys with oxygen under a variety of conditions associated with space vehicles, and to determine if the titanium could be treated or coated in some fashion to eliminate such hazards.