Download or read book Coupled Automotive Refrigerant Air Conditioning Hose Assemblies written by Interior Climate Control MAC Supplier Committee and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Scope of SAE J2064 covers coupled hose assemblies intended for containing and circulating lubricant, liquid and gaseous R134a and/or R-1234yf refrigerant in automotive air-conditioning systems. Historically, requirements for the hose used in coupled automotive refrigerant air conditioning assemblies was included in SAE J2064. SAE J2064 has been changed to establish the requirements for factory and field coupled hose assemblies. SAE J3062 has been issued to define requirements for the hose used in these assemblies into its own standard. SAE J2064 also provides the necessary values used in SAE J2727 Mobile Air Conditioning System Refrigerant Emission charts for R-134a and R-1234yf. The certified coupling of MAC hose assemblies is required in meeting certain regulatory requirements.A hose which has met the requirements of SAE J3062 and certified in J2911 must be used as part of the coupled assembly. A hose which meets the requirements of SAE J3062 does not insure the assembly will meet the requirements of SAE J2064. It is the hose assembly manufacturer's responsibility to confirm that the assemblies meet the specified acceptance criteria for this specification. The hose assembly shall be designed to minimize permeation of the refrigerant, contamination of the system, and to be functional over a temperature range of 30 to 125 °C. Specific construction details are to be agreed upon between user and supplier.Bulk hose produced prior to the release of this standard could be labeled "SAE J2064" and may not meet the requirements of SAE J3062. SAE J3062 has been issued to separate requirements for the hose used in SAE J2064 Coupled Refrigerant Automotive Air-Conditioning Hose Assembly Requirements into its own standard.Changes made to this document include: Title: This will now be a "coupled" hose assembly standard. Scope: Changed to reflected "coupled" hose assemblies and removed hose only references. Added the requirement that an SAE J2911 hose must be used in the assembly which meets the requirements of SAE J3062 Automotive Air-Conditioning Hose. References: Added SAEJ2911 and SAEJ3062. Manufacture: Deleted this section which is related to hose and is now part of SAEJ3062. Identification: Changed from "Hose Identification" to "Hose Assembly Identification". Deleted "Bulk Hose" section and removed hose marking references from "Hose Assembly Identification". Testing: Removed "Age Test", "Cold Test", "Vacuum Flattening", "Length Change", "Extraction Test", "Ozone Test" and "Moisture Ingression" tests. Removed listing these test results from Table A1 "Certification Table" shown in Appendix A. These are now requirements of SAEJ3062.

Download or read book Automotive Refrigerant Air Conditioning Hose Requirements written by Interior Climate Control MAC Supplier Committee and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Scope of SAE J3062 covers hose intended for containing and circulating lubricant, liquid and gaseous R134a and/or R-1234yf refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of the refrigerant, contamination of the system, and to be functional over a temperature range of -30 to 125 °C. Specific construction details are to be agreed upon between the user and supplier.Requirements for the hose used in coupled automotive refrigerant air-conditioning assemblies had been included in SAE J2064. SAE J3062 separates requirements for the hose used in these assemblies into its own standard. SAE J2064 also provides the necessary values used in SAE J2727 Mobile Air-Conditioning System Refrigerant Emission charts for R-134a and R-1234yf. Mobile air-conditioning system refrigerant emissions rates are established in SAE J2727 Emission charts and are important. The certified coupling of MAC hose assemblies is required in meeting certain regulatory requirements.Therefore, the Scope of SAE J2064 has been changed to establish the assembly requirements for factory and field coupled hose assemblies. A hose which meets the requirements of SAE J3062 may not meet the requirements of SAE J2064. Bulk hose produced prior to the release of this standard could be labeled "SAE J2064" and may not meet the requirements of SAE J3062. SAE J3062 has been issued to separate requirements for the hose used in SAE J2064 Coupled Refrigerant Automotive Air-Conditioning Hose Assembly Requirements into its own standard. These requirements are to be used for all bulk hose as of the release date of this standard.

Download or read book R134a Refrigerant Automotive Air Conditioning Hose written by Interior Climate Control Steering Committee and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose and hose assemblies intended for conducting liquid and gaseous R134a and/or R-1234yf refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of the refrigerant, contamination of the system, and to be functional over a temperature range of -30 to 125 °C. Specific construction details are to be agreed upon between user and supplier. A hose marked "J2064 - R-134a", "J2064 - R-1234rf" or "J2064 - R/134a/R-1234yf" signifies that it has been coupled, tested, and has met the requirements of SAE J2064 for the marked refrigerant(s). A hose marked "j2064" without any reference to refrigerant signifies that it has been coupled, tested, and has met the requirments of SAE J2064 for R134a only. It is the hose assembly manufacturer's responsibility to see that the assemblies meet the specified acceptance criteria for this specification.

Download or read book R134a Refrigerant Automotive Air Conditioned Hose written by Interior Climate Control MAC Supplier Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose and hose assemblies intended for conducting liquid and gaseous R134a and/or R-1234yf refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of the refrigerant, contamination of the system, and to be functional over a temperature range of 30 to 125 °C. Specific construction details are to be agreed upon between user and supplier. A hose marked "J2064 - R134a", "J2064 - R-1234yf" or "J2064 - R134a/R-1234yf" signifies that it has been coupled, tested, and has met the requirements of SAE J2064 for the marked refrigerant(s). A hose marked "J2064" without any reference to refrigerant signifies that it has been coupled, tested, and has met the requirements of SAE J2064 for R134a only. It is the hose assembly manufacturer's responsibility to see that the assemblies meet the specified acceptance criteria for this specification. Changes made to this document include: Title: changed to include R-1234yf and assemblies Scope: Changed to include R-1234yf. Hose labeling requirements added. Permeation: Acceptance criteria added for R-1234yf. Moisture Ingression: Steady state redefined to allow more variation in data when average results are below 50% of specification limit after 28 days. Field assembled hoses section added.

Download or read book R134a Refrigerant Automotive Air Conditioning Hose HS 150 2000 written by Interior Climate Control Steering Committee and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose and hose assemblies intended for conducting liquid and gaseous R134a refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of R134a refrigerant, contamination of the system, and to be functional over a temperature range of -30 to 125°C. Specific construction details are to be agreed upon between user and supplier. A hose marked "J2064" signifies that it has been coupled, tested, and has met the requirements of SAE J2064. It is the hose assembly manufacturer's responsibility to see that the assemblies meet the specified acceptance criteria for this specification.

Download or read book R134a Refrigerant Automotive Air Conditioned Hose written by Interior Climate Control Steering Committee and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose and hose assemblies intended for conducting liquid and gaseous R134a refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of R134a refrigerant, contamination of the system, and to be functional over a temperature range of -30 to 125øC. Specific construction details are to be agreed upon between user and supplier. A hose marked "J2064" signifies that it has been coupled, tested, and has met the requirements of SAE J2064. It is the hose assembly manufacturer's responsibility to see that the assemblies meet the specified acceptance criteria for this specification.

Download or read book Refrigerant 12 Automotive Air Conditioning Hose written by Non-Hydraulic Hose Committee and published by . This book was released on 1988 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers reinforced hose, or hose assemblies, intended for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12) in automotive air-conditioning systems. The hose shall be designed to minimize permeation of refrigerant 12 and contamination of the system and to be serviceable over a temperature range of -30 to 120 °C (-22 to 248 °F). Specific construction details are to be agreed upon between user and supplier. NOTE SAE J2064 is the Standard for refrigerant 134a hose. For refrigerant 134a use, refer to SAE J2064.

Download or read book AUTOMOTIVE AIR CONDITIONING HOSE written by Non-Hydraulic Hose Committee and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers reinforced rubber and reinforced thermoplastic hose, or hose assemblies, intended for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12) in automotive air conditioning systems. The hose shall be designed to minimize permeation of refrigerant 12 and contamination of the system and to be serviceable over a temperature range of 30 to 120°C (22 to 248°F). Specific construction details are to be agreed upon between user and supplier.

Download or read book Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning Specification Refrigerant 134a written by British Standards Institute Staff and published by . This book was released on 2001-11-07 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Road vehicles, Road vehicle components, Air-conditioning systems, Air-conditioning equipment, Flexible pipes, Rubber, Plastics, Refrigerants, Temperature, Working range

Download or read book Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning Specification written by British Standards Institution and published by . This book was released on 2020 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning Specification written by British Standards Institution and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hfc 134a R 134a Service Hose Fittings for Automotive Air Conditioning Service Equipment written by Interior Climate Control Steering Committee and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers fittings intended for connecting service hoses, per SAE J2196, from Mobile Air-Conditioning Systems to service equipment such as manifold gauges, vacuum pumps and air-conditioning charging, recovery and recycling equipment (Figure 1). Due to similarities between English and metric thread sizes a single, unique ACME thread fitting is specified. This fitting was recommended by the Compressed Gas Association (CGA), Connection Standards Committee Task Force as one which could be qualified to meet their requirements for use and safety in a time frame consistent with the introduction of R-134a. It was selected because its unique design would reduce the likelihood of cross-treading service hoses on R-12/R-134a refrigerant storage containers and service equipment. The high and low pressure hose in SAE J2196 requires the charge coupling (used to connect service hoses to vehicle access ports) to be an integral part of the hose assembly. To allow removal of the hose from the coupling for hose replacement only, a two-piece construction with a wrench tight connection is permitted. Specifications covering this fitting are provided.

Download or read book Service Hose for Automotive Air Conditioning written by Interior Climate Control Steering Committee and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use internally, in charging stations or service equipment intended for use in servicing mobile air-conditioning systems. The hose shall be designed to minimize permeation of refrigerants and contamination of refrigerant passing there through and to be serviceable over a temperature range of -30 to 95°C. Hose working pressure shall be a least 3.4 MPa and the minimum burst pressure be at least 5 times.

Download or read book BS ISO 8066 3 Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning Specification written by British Standards Institution and published by . This book was released on 2020 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning written by British Standards Institution and published by . This book was released on 2001 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Service Hose for Automotive Air Conditioning written by Interior Climate Control Service Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use internally, in charging stations or service equipment intended for use in servicing mobile air-conditioning systems. The technical report covers technology, products, or processes which are mature and not likely to change in the foreseeable future.

Download or read book Automotive Air Brake Hose and Hose Assemblies written by Hydraulic Hose and Hose Fittings Committee and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice covers minimum requirements for air brake hose assemblies made from reinforcedelastomeric hose and suitable fittings for use in automotive air brake systems including flexible connections from frame toaxle, tractor to trailer, trailer to trailer and other unshielded air lines with air pressures up to 1 MPa, that are exposed topotential pull or impact. This hose is not to be used where temperatures, external or internal, fall outside the range of-40 °C to +100 °C.This revision adds a fourth hose type, AIII, for use with permanent fittings only. Table 1 has been revised and nowcontains hoses A and AIII, Table 2 has been added for hoses AI and AII. All other Tables were renumbered accordingly.A note has been added that hose Type AIII in Table 1 can only be coupled with permanent fittings.