Download or read book Cost Effective Energy Design Strategies written by Passive Solar Industries Council (U.S.). Solar Energy Research Institute and published by . This book was released on 1990* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Design and Retrofit of Energy Efficient Buildings Communities and Urban Centers written by Moncef Krarti and published by Butterworth-Heinemann. This book was released on 2018-03-27 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Design and Retrofit of Energy Efficient Buildings, Communities, and Urban Centers presents current techniques and technologies for energy efficiency in buildings. Cases introduce and demonstrate applications in both the design of new buildings and retrofit of existing structures. The book begins with an introduction that includes energy consumption statistics, building energy efficiency codes, and standards and labels from around the world. It then highlights the need for integrated and comprehensive energy analysis approaches. Subsequent sections present an overview of advanced energy efficiency technologies for buildings, including dynamic insulation materials, phase change materials, LED lighting and daylight controls, Life Cycle Analysis, and more. This book provides researchers and professionals with a coherent set of tools and techniques for enhancing energy efficiency in new and existing buildings. The case studies presented help practitioners implement the techniques and technologies in their own projects. Introduces a holistic analysis approach to energy efficiency for buildings using the concept of energy productivity Provides coverage of individual buildings, communities and urban centers Includes both the design of new buildings and retrofitting of existing structures to improve energy efficiency Describes state-of-the-art energy efficiency technologies Presents several cases studies and examples that illustrate the analysis techniques and impact of energy efficiency technologies and controls

Download or read book Hawaiian Design written by Kent Royle and published by DIANE Publishing. This book was released on 1993-07 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents seven strategies for energy efficient architectural design in Hawaii -- orientation and building form, solar control, daylighting, natural ventilation, landscaping, building systems and material selection and equipment efficiency. Provides architects with practical design guidelines to serve as a basis for decision making during the conceptual and schematic stages of a project. Drawings, graphs and photos.

Download or read book Energy Design Strategies for Retrofitting written by A. Boeri and published by WIT Press. This book was released on 2014-12-15 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a coherent and realistic vision of the implications of the energy issue in the future development of our cities; places emphasis on the links between very specific and technical topics and the most challenging issues concerning energy savings and the transition to a low carbon society. A great part of the built environment in most European cities consists of buildings dating from 60s to early 90s, for residential purposes: this stock clearly presents several problems related to its functional layout, as well as its energy/thermal behaviour. Applying sustainable and energy savings principles to retrofitting interventions on the stock above is one of the most urgent challenges to be met in the very near future. Giving some examples and case studies, this book investigates retrofitting interventions in terms of energy balance: from design strategies to choice of materials and components; from market trends analysis to economical assessment, from the targeted energy performance to the energy investments needed for achieving it. The reader will benefit from the real life experiences and related results described in this book and acquire all the tools for a constructive evaluation of the different options available to him/her, when faced with retrofitting interventions, thanks to a global view of all the issues involved.

Download or read book Guideline for sustainable energy efficient architecture and construction written by Rückert, Klaus and published by Universitätsverlag der TU Berlin. This book was released on 2014-07-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays there is an ever growing awareness regarding inevitable importance of sustainable development and its sub topics such as environment protection, ecology, resource saving, energy efficiency, etc. Due to massive and rapid development in recent years, this topic is getting more crucial in developing countries for instance Iran. It is getting more obvious that most of the development activities in absence of precise analysis of current conditions, as well as consequences of such activities, will lead to devastation of natural resources. The resources that is essential for further development of the country. Therefore, It is necessary to deal with sustainable development and environmental issues from the broader perspective, where includes items underlying immediate causes of environmental impact and at the same time tries to improve them. Sustainability or sustainable development is an umbrella covering many issues and aspects, among them energy, which is the key item, because energy consumption of buildings could have an impact on environment more than other aspects. Considering the huge portion of energy consumption in construction industry and housing sector, paying special attention to improvements in this sector is essential. Following this goal, the aim of this publication is to highlight procedures and practices which promote sustainable construction that is about creating a better quality of building and more healthy places to live in. Procedure of sustainable design includes various approaches and methods to develop energy efficient and environmentally sensitive buildings. Such approaches and methods demonstrate how to design, develop and construct all buildings in general and residential buildings in particular. Among various approaches towards sustainability, “Passive solar strategies” are well-known thanks to their cost efficiency and context friendliness of its principals and measures. The approach of passive design (architectural) strategies could be considered as the most applicable approach for resource saving and sustainability, thinking about special situation of Iran in particular and the Mena region in general. Such an approach requires paying special attention to climate, social characteristics of current or prospective inhabitants, topographical-physical characteristics as well as architectural characteristics of the understudied area. The relationships and interactions among society, building and its architecture and climate is “Site-specific” and dynamic. Therefore, they should be studied and properly analyzed throughout a specific project process for each certain place. The most expecting outcomes are precise definitions of passive design strategies, generally for buildings in MENA Region and especially for Iran. This publication is prepared in the young cities project framework, as the reasonable outcome of the developed pilot projects. The book starts with introducing the target group, related definitions and a brief overview on a conventional approach and its impact on environment. This chapter ends up with a brief review on benefits of applying sustainable guidelines. As the next step, after analyzing the climate and its relationship with thermal comfort and building, the main principals of passive solar design are introduced. The selected principles are: orientation, day-lighting, shading, thermal mass, insulation and ventilation. After a brief introduction of the principals, each one is explained in detail through its general principles and design strategies. Sustainable construction is examined based on its main pillars: construction systems, building elements, ecological building materials, and applicable measures for building physic. Construction systems are sorted out in six main groups as: block work- brick infill, block work- lightweight block infill, conventional panels, light weight steel frame, tunnel form structural system and precast modular. All selected systems are introduced based on following factors: brief description of the building concept, factory production, insulation, wastage, finishes, labor, installation, transport- lifting, services, hydronic cooling/ heating and safety. Then main building elements are examined. Here the elements are limited to: foundations, walls, floors, roofs, doors and windows. After a short description, different types of each element are introduced. Ecological building materials are investigated in chapter four. To find a base to compare, several common criteria are selected such as: embodied energy, pollution and waste, local production, reusability and recyclability, durability and interdependency. Applicable measures for building physic are examined in chapter five. The selected main measures are as follows: insulation, glazing, thermal mass, day-lighting, shading, ventilation and air-tightness. After describing the general principles of each measure, several recommendations in frame of design considerations are provided. Die enorme Bedeutung nachhaltiger Projekte wie Umweltschutz, Ökologie, sparsamer Umgang mit Rohstoffen, Energieeffizienz usw. dringt immer stärker in unser Bewusstsein. Aufgrund der massiven und rasanten Entwicklung in den Schwellenländern, z. B. Iran, gewinnen Umweltschutz und Nachhaltigkeit immer mehr an Relevanz. Ein einseitiges Wirtschaftswachstum, ohne Berücksichtigung ökologischer und klimatischer Bedingungen, verursacht die Zerstörung der Umwelt und Rohstoffe, Ressourcen, die für die weitere Entwicklung der Länder unverzichtbar sind. Es ist unumgänglich, sich umfassend mit nachhaltiger Entwicklung und ökologischen Aspekten auseinanderzusetzen, die unmittelbaren Auswirkungen auf die Umwelt zu erfassen und gleichzeitig Möglichkeiten einer Optimierung aufzuzeigen. Nachhaltigkeit und Umweltschutz erfassen eine Vielzahl von Themen und Aspekten, u. a. den Energieverbrauch; ein wesentlicher Faktor, da der Energieverbrach in Gebäuden den größten Einfluss auf die Umweltbilanz hat. In Anbetracht des enormen Energieverbrauchs in Bauwirtschaft und Wohnungsbau ist es unerlässlich, gerade in diesem Bereich eine Optimierung in der weiteren Entwicklung zu verfolgen. Diesem Ziel folgend, werden in dieser Publikation Verfahren und Methoden, für nachhaltige Bauweisen, unter Berücksichtigung einer besseren Bauqualität und gesundheitlicher Aspekte, erläutert. Die Maßnahmen nachhaltigen Designs beinhalten verschiedene Ansätze und Methoden, energieeffiziente und umweltfreundliche Gebäude zu entwickeln. Sie zeigen Entwurf, Konstruktion und bauliche Ausführung von Gebäuden im Allgemeinen und Wohngebäuden im speziellen. Neben den verschiedenen Ansätzen sind die „passive solar strategies“ die wohl namhaftesten Methoden, da diese sehr rentabel und daher für Bauherren attraktiv sind. Angesichts der speziellen Situation im Iran im Besonderen und der MENA-Region im Allgemeinen, könnten die passiven Design- (Architektur-) Strategien als eine der am besten anzuwendenden Methoden für Rohstoffeffizienz und Nachhaltigkeit betrachtet werden. Dies setzt eine besondere Berücksichtigung des dortigen Klimas, der sozialen Charakteristiken derzeitiger oder zukünftiger Einwohner als auch der topographisch-physischen und architektonischen Charakteristiken der betroffenen Region voraus. Beeinflussung und Beziehungen zwischen Gesellschaft, Gebäuden, Architektur und Klima sind „lokal spezifisch“ und dynamisch. Deshalb sollten diese Faktoren für jeden Standort neu geprüft und analysiert werden. Die Resultate dieser Analysen, allgemein für Gebäude in der MENA-Region und im Besonderen im Iran, zeigen deutlich die Überlegenheit von passiven Designstrategien. Diese Publikation ist das Resultat der entwickelten Pilotprojekte im Rahmen des Young Cities-Projektes. Sie beginnt mit der Vorstellung der Zielgruppe, relevanten Definitionen und einem kurzem Überblick des konventionellen Ansatzes und dessen Einfluss auf die Umwelt. Das Kapitel endet mit einem kurzen Rückblick über den Nutzen nachhaltiger Bauweise. Nach Analyse des Klimas und seine Beziehung zu thermischem Komfort und Gebäuden werden die wichtigsten Prinzipien passiver Solarenergie vorgestellt: Orientierung, Tageslicht, Schatten, thermale Masse, Isolierung und Ventilierung; ihre Grundlagen und Designstrategien detailliert erläutert. Nachhaltige Konstruktion und deren Hauptpfeiler, Bausysteme, Bauelemente, ökologische Bauelemente und anwendbare Maßnahmen für die Bauphysik, werden anschließend beleuchtet. Dabei wurden die Konstruktionssysteme in sechs Hauptgruppen gegliedert: Ziegeleinfüllung, leichtgewichtige Ziegeleinfüllung, klassische Füllwände, leichtgewichtige Stahlrahmen, tunnelförmige Struktursysteme und vorgefertigte Modelle. Anhand folgender Faktoren werden diese eingehend dargestellt: Baukonzepts, Fabrikproduktion, Isolierung, Abnutzung, Verarbeitung, Arbeitsaufwand, Installierung, Transport-Beförderung, Services, hydronische Kühlung/Heizung und Sicherheit. Die Hauptbauelemente wie Unterbau, Wände, Boden, Dächer, Türen und Fenster werden beschrieben und verschiedene Baureihen dieser vorgestellt. Das vierte Kapitel befasst sich mit ökologischen Baumaterialien. Um hierbei eine vergleichbare Basis zu finden, wurden gemeinsame Kriterien ausgewählt: graue Energie, Verschmutzung und Abfall, lokale Produktion, Wiederverwendung und Recycling, Nachhaltigkeit und Interdependenzen. Im fünften Kapitel werden anwendbare Maßnahmen für die Bauphysik, wie Isolierung, Lasur, Wärmemasse, Tageslicht, Schatten, Ventilation und Luftdichte, untersucht, deren Grundlagen beschrieben und Empfehlungen bezüglich der Gestaltung präsentiert

Download or read book Cost Effective Energy Efficient Building Retrofitting written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2017-01-03 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost-Effective Energy Efficient Building Retrofitting:Materials, Technologies, Optimization and Case Studies provides essential knowledge for civil engineers, architects, and other professionals working in the field of cost-effective energy efficient building retrofitting. The building sector is responsible for high energy consumption and its global demand is expected to grow as each day there are approximately 200,000 new inhabitants on planet Earth. The majority of electric energy will continue to be generated from the combustion of fossil fuels releasing not only carbon dioxide, but also methane and nitrous oxide. Energy efficiency measures are therefore crucial to reduce greenhouse gas emissions of the building sector. Energy efficient building retrofitting needs to not only be technically feasible, but also economically viable. New building materials and advanced technologies already exist, but the knowledge to integrate all active components is still scarce and far from being widespread among building industry stakeholders. Emphasizes cost-effective methods for the refurbishment of existing buildings, presenting state-of-the-art technologies Includes detailed case studies that explain various methods and Net Zero Energy Explains optimal analysis and prioritization of cost effective strategies

Download or read book Greening Our Built World written by Greg Kats and published by Island Press. This book was released on 2013-03-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Green” buildings—buildings that use fewer resources to build and to sustain—are commonly thought to be too expensive to attract builders and buyers. But are they? The answer to this question has enormous consequences, since residential and commercial buildings together account for nearly 50% of American energy consumption—including at least 75% of electricity usage—according to recent government statistics. This eye-opening book reports the results of a large-scale study based on extensive financial and technical analyses of more than 150 green buildings in the U.S. and ten other countries. It provides detailed findings on the costs and financial benefits of building green. According to the study, green buildings cost roughly 2% more to build than conventional buildings—far less than previously assumed—and provide a wide range of financial, health and social benefits. In addition, green buildings reduce energy use by an average of 33%, resulting in significant cost savings. Greening Our Built World also evaluates the cost effectiveness of “green community development” and presents the results of the first-ever survey of green buildings constructed by faith-based organizations. Throughout the book, leading practitioners in green design—including architects, developers, and property owners—share their own experiences in building green. A compelling combination of rock-solid facts and specific examples, this book proves that green design is both cost-effective and earth-friendly.

Download or read book Design Smart written by B.C. Hydro. Power Smart and published by Burnaby, B.C. : Power Smart, B.C. Hydro. This book was released on 1995 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Architectural Energy Efficiency written by Nasrollahi, Farshad and published by Universitätsverlag der TU Berlin. This book was released on 2013-06-14 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy saving in buildings through cost and energy-intensive measures, such as the application of additional building materials and technologies, is only possible with a great consumption of resources and CO2 emissions for their production. For low energy buildings, the investment costs, including user costs and governmental subsidies, are generally high, and construction is not always economically viable in consideration of the national capital in the present economic conditions of most countries. For these reasons, it is first of all necessary to apply cost and resource-efficient measures to save energy in buildings and then make use of additional cost and energy-intensive measures by improving the thermal envelope, the HVAC system or by installing energy generating systems. One of the most cost effective and ecological methods of energy saving in buildings is the reduction of energy requirements through climate responsive architecture. Due to the fact that energy saving through the optimization of architecture is not only cost-neutral, resource-efficient and carbon-neutral but also has a very high energy-saving potential, the first and most important strategy to save energy should be an optimized and climate responsive design. Energy saving through optimized architectural design is economically and ecologically sustainable. The development of building simulation science in the last decades has made it easier to study the energy performance of buildings. Tools have made it possible to predict the complex behavior of buildings regarding the climate. Except for the comparison of different building typologies to find the most efficient, there are no other methods to achieve energy savings through the architectural design, which can be applied by a variety of building types and climates. Therefore, in order to encourage the optimization of architectural design, it is necessary to improve these methods which represent strategies to significantly reduce the energy demand of buildings. Architectural Energy Efficiency is a parametric method which separately studies the effects of various energy-related architectural factors on the energy demand of buildings by using dynamic energy simulations to find the, from an energy efficiency point of view, optimum value for each of these. The architectural factors include orientation, building elongation, building form, opening ratio in different orientations, sun shading, natural ventilation etc. The research process that led to the formulation of the Architectural Energy Efficiency method is based on a series of simulations carried out by a dynamic simulation software tool (DesignBuilder) to calculate the energy demands of a building with different variants for a single architectural feature. The aim of the simulations is to find an optimum set of energy-related variables that result in the best and most efficient energy performance for a specific building type and climate. This method of efficiency illustrates the effects different architectural features have on the various energy demands of buildings. The criteria are derived from the application of this method for a specific building occupation and climate, and can be applied in the design process of buildings, which leads to improvements of the energy performance and a reduction of resource consumption. As the architectural design affects the heating and cooling as well as the lighting energy demands of buildings, the optimum value of each factor must be based on these three aspects. The heating, cooling and lighting energy demands of buildings all behave very differently. Therefore, these three energy demands together (i. e. the sum of heating, cooling and lighting energy) must also be applied as a criterion to study the building energy performance and find the optimum value for each architectural feature. The criteria for selecting the best variant can not only be based on the total energy demand, but should also consider the primary energy demand, the CO2 emissions, energy costs (for heating, cooling and lighting), life cycle costs, etc. The application of these findings to the architectural design of buildings minimizes the energy demand, the CO2 emissions and energy costs of the building, does not, however, affect the initial building costs. The advantages of energy saving through optimizing the architectural design are not only the improvement of the building’s energy performance, but also the fact that the energy saving is cost and resource-efficient. This means that the energy demand of a building will decrease without increasing the investment costs of the building and without consuming any resources and energy for the production of additional building materials. The cost and resource efficiency contributes towards the economic and ecological sustainability of a building during the full life cycle.

Download or read book Designing Climate Solutions written by Hal Harvey and published by Island Press. This book was released on 2018-11-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the effects of climate change already upon us, the need to cut global greenhouse gas emissions is nothing less than urgent. It’s a daunting challenge, but the technologies and strategies to meet it exist today. A small set of energy policies, designed and implemented well, can put us on the path to a low carbon future. Energy systems are large and complex, so energy policy must be focused and cost-effective. One-size-fits-all approaches simply won’t get the job done. Policymakers need a clear, comprehensive resource that outlines the energy policies that will have the biggest impact on our climate future, and describes how to design these policies well. Designing Climate Solutions: A Policy Guide for Low-Carbon Energy is the first such guide, bringing together the latest research and analysis around low carbon energy solutions. Written by Hal Harvey, CEO of the policy firm Energy Innovation, with Robbie Orvis and Jeffrey Rissman of Energy Innovation, Designing Climate Solutions is an accessible resource on lowering carbon emissions for policymakers, activists, philanthropists, and others in the climate and energy community. In Part I, the authors deliver a roadmap for understanding which countries, sectors, and sources produce the greatest amount of greenhouse gas emissions, and give readers the tools to select and design efficient policies for each of these sectors. In Part II, they break down each type of policy, from renewable portfolio standards to carbon pricing, offering key design principles and case studies where each policy has been implemented successfully. We don’t need to wait for new technologies or strategies to create a low carbon future—and we can’t afford to. Designing Climate Solutions gives professionals the tools they need to select, design, and implement the policies that can put us on the path to a livable climate future.

Download or read book Net Zero Energy Design written by Thomas Hootman and published by John Wiley & Sons. This book was released on 2012-10-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conveniently organized and packed with robust technical content and clear explanations of key principles Written by an architect who is the director of sustainability at a global architecture firm, Net Zero Energy Design is a practical guide for architects and related construction professionals who want to design and build net zero energy commercial architecture. It offers no-nonsense strategies, step-by-step technical analysis, and valuable examples, in addition to developed case studies. With a focus on application in a variety of building types and scales, the book also develops a broad-based understanding of all the integrated principles involved in achieving net zero energy. This book is an indispensable resource for anyone venturing into net zero energy design, construction, and operation, and it also serves as an excellent resource on a variety of sustainable design topics. Important features include: Organization based upon the commercial building delivery process Robust technical content for use in actual project applications Analysis examples that demonstrate key technical principles Plenty of design data for use as a valuable design resource Abundant and sophisticated information graphics and color illustrations and photographs A distinct design focus on the content that inspires adoption of principles into projects

Download or read book Energy Efficient Building Systems written by Lal Jayamaha and published by McGraw Hill Professional. This book was released on 2006-12-11 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proven Strategies and Solutions for Reducing Energy Consumption Property and facility managers can turn to Energy-Efficient Building Systems as a one-stop guide to operating and maintaining commercial building systems at peak efficiency. Designed to help reduce energy costs and meet environmental standards, this state-of-the-art productivity tool contains fully illustrated, real-world examples of successful green building projects that have achieved significant, energy-saving results. From energy management and auditing, HVAC systems, cooling towers, and pumping systems...to lighting, electrical systems, automation, and building envelope, this expert resource takes readers step by step through procedures for getting optimal performance from every building system. For each system, the book presents the latest methods for improving efficiency...identifying promising new solutions...evaluating their feasibility...and estimating actual savings. Comprehensive and authoritative, Energy-Efficient Building Systems enables building professionals to: Get an in-depth understanding of the principles of each building system Select the most efficient systems for any nonresidential building Maximize energy efficiency with practical strategies and solutions Utilize hands-on methods for evaluating feasibility and estimating savings Review real-world examples of successful green building projects Inside This Cost-Saving Energy Guide • Energy Management and Energy Auditing • Air-Conditioning and Central Chiller Systems • Boilers and Heating Systems • Pumping Systems • Cooling Towers • Air Handling and Distribution Systems • Lighting Systems • Building Electrical Systems • Building Automation Systems • Building Envelope

Download or read book Architecture Comfort and Energy written by M. Sala and published by Elsevier. This book was released on 1999-02-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we seek to approach the architecture-energy combination and its relationship to human comfort and the environment .There are chapters on thermal comfort, low energy architecture dealing with various criterion for comfort in different parts of the World. The book also seeks to understand how previous generations lived in harsh climates and without abundant sources of energy, yet managed to design and build appropriate dwellings providing both comfort and harmony with the environment. Other chapters deal with the bioclimatic concept in Vernacular Architecture; the major role which climate plays at different locations and how this can dictate the shape and form of the buildings and save energy; the importance of micro-climate and its various elements and usage; ventilation and its importance in buildings and the technology for modern architecture.

Download or read book Passive Solar Desing Strategies for Buildings A Case Study on Improvement of an Existing Residential Building s Thermal Performance by Passive Solar Design Tools written by Serkan Bilgiç and published by . This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the potentials of the use of Passive Solar Design strategies in existing low-rise residential buildings in the context of energy-efficient building design. Among the ways of developing energy-efficient building design, there are mainly active and passive systems to consider and the thesis focuses on passive ones which require integration of architectural characteristics and energy-efficiency strategies, which can likely be cost-effective and thermally comfortable as a result of that integration.In order to achieve the objective of the study, a methodology has been developed. Fist a thorough literature survey is conducted. Then examples related to subject are investigated. Finally an existing residential building is selected and analysed as the case study. Current thermal performance and improved thermal performance of this building are analysed by the help of a software called Energy-10. Results of both original and improved projects are interpreted accordingly.In buildings, Passive Solar Design strategies can provide fundamental comfort conditions related to heating, cooling for thermal and natural lighting for visual comfort or help building.s conventional mechanical systems achieve these conditions requiring less amount of energy. Some of the Passive Solar Desgin strategies are seem in traditional architecture from harsh cold to hot humid climate, they have been in harmony with their environment and provide comfort conditions adjusting the outdoor climatic features by climatic design strategies and they are called as climate-responsive buildings. Solar orientation, solar apertures, thermal mass, solar chimneys, wind captures, lattice brise-soleils or mushrabiyas are the Passive Solar Design elements which have been used in traditional buildings, now abandoned, running by means of natural air currents.To achieve a low-energy building, thermal insulation ought to be considered as the main energy-efficiency feature. Turkish thermal insulation standarts .TS 825. is deficient for designing low-energy buildings and there is no regulations that make the designers feel the desire to utilize low-energy concepts for their designs. Besides, the building.s morphological organisation should be involved with respect to climatic and environmental data. One of the most important criterion in designing an energy-efficient building is incoprating properties of microclimate of the site that the building is to be placed. Using environmental (climatic, geographic, etc.) data well in building designs can lead to energy efficiency. Solar geometry, latitude, altitude, wind patterns, vegetation, hills and neighbor buildings are the determinants of microclimate of a site.The findings of the study indicate that with the energy-efficiency design strategies by passive solar components having the additional cost of about 9% of the total building cost, it is possible to save the total annual energy used in this specific residential building by 18%. There are three types of energy need for the space conditioning and visual comfort (i. e., heating, cooling and lighting), the maximum energy saving is achieved in heating energy use by 61% decrease, lighting energy use is also decreased by 40%. However, in cooling energy need, there is an increase of 34%. This amount is overshadowed by passive solar gains in other energy savings (i. e., heating and lighting) and when the cooling strategies of the building (i. e., natural ventilation and stack effect ventilation) are considered, the building might be said to perform well in terms of thermaly in annual operation.

Download or read book The Not So Big House written by Sarah Susanka and published by Taunton Press. This book was released on 2001 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a review of social trends and their effect on architecture and design.

Download or read book Energy Performance Based Design Build Process written by and published by . This book was released on 2014 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.

Download or read book Energy and Environment in Architecture written by Nick Baker and published by Taylor & Francis. This book was released on 2003-09-02 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and revolutionary text which explains the principles behind the LT Method (2.1), a manual design tool developed in Cambridge by the BRE. The LT Method is a unique way of estimating the combined energy usage of lighting, heating, cooling and ventilation systems, to enable the designer to make comparisons between options at an early, strategic stage. In addition,Energy and Environment in Architecture the book deals with other environmental issues such as noise, thermal comfort and natural ventilation design. A variety of case studies provide a critique of real buildings and highlight good practice. These topics include thermal comfort, noise and natural ventilation.