Download or read book Corrosion Protection of Structural Metals and Alloys 2017 2018 written by Wolfram Fürbeth and published by Trans Tech Publications Ltd. This book was released on 2021-05-27 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregated Book

Download or read book Intelligent Coatings for Corrosion Control written by Atul Tiwari and published by Butterworth-Heinemann. This book was released on 2014-10-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Coatings for Corrosion Control covers the most current and comprehensive information on the emerging field of intelligent coatings. The book begins with a fundamental discussion of corrosion and corrosion protection through coatings, setting the stage for deeper discussion of the various types of smart coatings currently in use and in development, outlining their methods of synthesis and characterization, and their applications in a variety of corrosion settings. Further chapters provide insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. - Reviews fundamentals of corrosion and coatings for corrosion control before delving into a discussion of intelligent coatings—useful for researchers and grad students new to the subject - Covers the most current developments in intelligent coatings for corrosion control as presented by top researchers in the field - Includes many examples of current and potential applications of smart coatings to a variety of corrosion problems

Download or read book Corrosion written by Wolfram Fürbeth and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregated Book

Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-06 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. - Explores the literature between 1950 and 2020 and contains over 2000 references - Offers the most complete monograph on the issue - Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair - Delivers the most complete review on corrosion of metals in marine/offshore environments - Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms

Download or read book Handbook of Hot dip Galvanization written by Peter Maaß and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.

Download or read book Corrosion and Protection of Magnesium Alloys written by Liang Wu and published by Frontiers Media SA. This book was released on 2023-02-16 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) alloys, possessing good thermal and electrical conductivity, low density, recyclability, high specific strength, and excellent damping capacity, are regarded as one of the most promising light metallic materials. Mg alloys are also known as the “inexhaustible green light engineering material” compared with steel, aluminum, copper, and engineering plastics, providing some important applications in communications, automotive, defense, aerospace, and biomedical industries. However, the low electrode potential causes poor corrosion resistance in the environment of moist air, sulfur, and marine atmosphere. And thus, the corrosion and protection technology of Mg and its alloys is listed as an important research topic in this field. In this Research Topic, the latest research papers on corrosion and protection of Mg and its alloys are collected to provide a platform for researchers and readers to understand the recent developments in this field. Good use of this platform could improve the international research level in corrosion and protection of Mg and its alloys and promote the “green, safe, life-extending and smart” anti-corrosion technology and expand the application range of Mg and its alloys. High-quality Original Research and Review articles in this field are all welcome for submission to this Research Topic. Research interests include but are not limited to the following areas: • Corrosion behaviors and mechanisms • Surface treatment technology • Biodegradable medical applications • High-temperature oxidation • Inhibitors for Mg and its alloys • New monitoring, evaluation, simulation, and prediction methods

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Microstructure and Mechanical Properties of Structural Metals and Alloys written by Andrey Belyakov and published by MDPI. This book was released on 2019-06-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this special issue clearly reflect the modern research trends in materials science. These fields of specific attention are high-Mn TWIP steels, high-Cr heat resistant steels, aluminum alloys, ultrafine grained materials including those developed by severe plastic deformation, and high-entropy alloys. The major portion of the collected papers is focused on the mechanisms of microstructure evolution and the mechanical properties of metallic materials subjected to various thermo-mechanical, deformation or heat treatments. Another large portion of the studies is aimed on the elaboration of alloying design of advanced steels and alloys. The changes in phase content, transformation and particle precipitation and their effect on the properties are also broadly presented in this collection, including the microstructure/property changes caused by irradiation.

Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Corrosion and Protection written by Yongchang Huang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-02-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces corrosion mechanisms and protection technologies for metallic and non-metallic materials. A focus lies on the protection of high-tech materials with applications in space and environments exposed to unclear radiation and biological hazards. The determination, measurement and control of different corrosion mechanisms are discussed in detail. Combining theories with case studies, it is an essential reference for material scientists and engineers.

Download or read book Joining of Polymer Metal Hybrid Structures written by Sergio T. Amancio Filho and published by John Wiley & Sons. This book was released on 2018-02-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Damage of Structural Materials written by J. Koutský and published by Elsevier. This book was released on 2013-10-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the integrity of nuclear power plants is critical in the prevention or control of severe accidents. This monograph deals with both basic groups of structural materials used in the design of light-water nuclear reactors, making the primary safety barriers of NPPs. Emphasis is placed on materials used in VVER-type nuclear reactors: Cr-Mo-V and Cr-Ni-Mo-V steel for RPV and Zr-Nb alloys for fuel element cladding. The book is divided into 7 main chapters, with the exception of the opening one and the chapter providing a phenomenological background for the subject of radiation damage. Chapters 3-6 are devoted to RPV steels and chapters 7-9 to zirconium alloys, analysing their radiation damage structure, changes of mechanical properties due to neutron irradiation as well as factors influencing the degree of their performance degradation. The recovery of damaged materials is also discussed. Considerable attention is paid to a comparison of VVER-type and western-type light-water materials. This monograph will be of great value to postgraduate students in nuclear engineering and materials science, and for designers and research workers in nuclear energy.

Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.

Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Download or read book Lightweight Polymer Composite Structures written by Sanjay Mavinkere Rangappa and published by CRC Press. This book was released on 2020-09-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive account of developments in the area of lightweight polymer composites. It encompasses design and manufacturing methods for the lightweight polymer structures, various techniques, and a broad spectrum of applications. The book highlights fundamental research in lightweight polymer structures and integrates various aspects from synthesis to applications of these materials. Features Serves as a one stop reference with contributions from leading researchers from industry, academy, government, and private research institutions across the globe Explores all important aspects of lightweight polymer composite structures Offers an update of concepts, advancements, challenges, and application of lightweight structures Current status, trends, future directions, and opportunities are discussed, making it friendly for both new and experienced researchers.

Download or read book LaQue s Handbook of Marine Corrosion written by David A. Shifler and published by John Wiley & Sons. This book was released on 2022-07-13 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.