Download or read book Corrosion Monitoring in Nuclear Systems EFC 56 written by Stefan Ritter and published by Routledge. This book was released on 2017-09-20 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research into the detection of stress corrosion crack initiation in nuclear power plant environments (essentially high temperature water at around 300 °C) by various methods, particularly the electrochemical noise technique but also including the electrochemical impedance, acoustic emission and direct current potential drop methods. The second part addresses the goal to develop in-situ techniques and includes examples of the application of electrochemical corrosion potential monitoring. This book will be of particular interest to scientists and engineers concerned with the mitigation of corrosion in nuclear systems.
Download or read book Corrosion Monitoring in Nuclear Systems written by Stefan Ritter and published by . This book was released on 2010 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation. This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems. With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches
Download or read book Techniques for Corrosion Monitoring written by Lietai Yang and published by Woodhead Publishing. This book was released on 2020-12-01 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques for Corrosion Monitoring, Second Edition, reviews electrochemical techniques for corrosion monitoring, such as polarization techniques, potentiometric methods, electrochemical noise and harmonic analyses, galvanic sensors, differential flow through cells and multielectrode systems. Other sections analyze the physical or chemical methods of corrosion monitoring, including gravimetric, radioactive tracer, hydrogen permeation, electrical resistance and rotating cage techniques, and examine corrosion monitoring in special environments such as microbial systems, concrete and soil, and remote monitoring and model predictions. A final group of chapters case studies covering ways in which corrosion monitoring can be applied to engine exhaust systems, cooling water systems, and more. With its distinguished editor and international team of contributors, this book is a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion in such areas as automotive engineering, power generation, water suppliers and the petrochemical industry. Provides an in-depth presentation of what current corrosion monitoring techniques are available Presents insights into how to choose the best technique(s) for specific corrosion monitoring needs Includes case studies that highlight the main issues Serves as a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion
Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the “Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 (“Number 1 - Corrosion in the Nuclear Industry ). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment Provides comprehensive coverage of the topic as written by noted experts in the field Includes coverage of nuclear waste corrosion
Download or read book Performace of Multi Probe Corrosion Monitoring Systems at the Hanford Site written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Between 2007 and 2009, several different multi-probe corrosion monitoring systems were designed and installed in high-level nuclear waste tanks at the U.S. Department of Energy's Hanford Site in WaShington State. The probe systems are being monitored to ensure waste tanks operate in regions that minimize localized corrosion (i.e., pitting) and stress corrosion cracking. The corrosion monitoring systems have been installed in wastes with different chemistry types. An ongoing effort during the same time period has generated non-radioactive simulants that are tested in the laboratory to establish baseline corrosion monitoring system performance and characterize data to allow interpretation of readings from the multiple corrosion monitoring systems. Data collection from these monitoring systems has reached the point where the results allow comparison with the laboratory testing. This paper presents analytical results from the corrosion monitoring system development program.
Download or read book Corrosion Inspection and Monitoring written by Pierre R. Roberge and published by John Wiley & Sons. This book was released on 2007-02-09 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference on modern techniques and methods for monitoring and inspecting corrosion Strategic corrosion inspection and monitoring can improve asset management and life cycle assessment and optimize operational budgets. Advances in computer technologies and electronics have led to very efficient tools for monitoring and inspecting corrosion, including impedance spectroscopy, electrical field signatures, acoustic emissions, and radiographs. This up-to-date reference explains both intrusive and non-intrusive methods of measuring corrosion rates. It covers: The impact of corrosion on the economy and the safe operation of systems in diverse operational environments The various forms of corrosion, with a focus on the detectability of corrosion damage in the real world The principles of risk-based inspection and various risk assessment methodologies (HAZOP, FMECA, FTA, and ETA), with examples from industry The monitoring of microbiologically induced corrosion (MIC), cathodic protection (CP) systems, and atmospheric corrosion Non-destructive evaluation (NDE) techniques, including visual, ultrasonic, radiographic, electromagnetic, and thermographic inspection Roadmaps used by various industries and organizations for carrying out complex inspection and monitoring schedules Complete with graphics and illustrations, this is the definitive reference for professionals involved in the maintenance of industrial systems and structures, from oil exploration to chemical plants and infrastructures; consultants; property managers; and civil, materials, and construction engineers.
Download or read book A Study of Corrosion Monitoring Techniques Used in URLs for Metals written by Sirui Li and published by . This book was released on 2017 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: With the increasing use of fission-type nuclear power generation, particularly high-levels radioactive nuclear waste are generated, so the safe use of nuclear energy requires proper disposal of high-level radioactive nuclear waste. The selected treatment method is deep geological disposal. Therefore, underground research laboratory (URL) to prepare for deep geological disposal will also be carried out. Corrosion of metallic materials, which are closely related to the safety of URL, is the focus of this research project. This study selected monitoring techniques for URL and developed a rough monitoring scheme for temperature and resistivity in URL. In this study, corrosion-temperature and corrosion-resistivity monitoring experiments were carried out in different bentonite samples to simulate the experiments in URL. The results show that the self-compensating high-precision inductance corrosion monitoring system and multifunction soil corrosion rate measurer proved to be a good system for monitoring the corrosion-temperature and corrosion-resistivity of metals. However, the life span limitation makes them unable to meet the requirements of URL. The results also show that the corrosion rate of metal in bentonite is positively correlated with temperature. The existing electrochemical probes are suitable for monitoring the corrosion rate, but not suitable for soil corrosion rate monitoring.
Download or read book PERFORMANCE OF MULTI PROBE CORROSION MONITORING SYSTEMS AT THE HANFORD SITE written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Between 2007 and 2009, several different multi-probe corrosion monitoring systems were designed and installed in high-level nuclear waste tanks at the U.S. Department of Energy's Hanford Site in WaShington State. The probe systems are being monitored to ensure waste tanks operate in regions that minimize localized corrosion (i.e., pitting) and stress corrosion cracking. The corrosion monitoring systems have been installed in wastes with different chemistry types. An ongoing effort during the same time period has generated non-radioactive simulants that are tested in the laboratory to establish baseline corrosion monitoring system performance and characterize data to allow interpretation of readings from the multiple corrosion monitoring systems. Data collection from these monitoring systems has reached the point where the results allow comparison with the laboratory testing. This paper presents analytical results from the corrosion monitoring system development program.
Download or read book CORROSION MONITORING IN HANFORD NUCLEAR WASTE STORAGE TANKS DESIGN AND DATA FROM 241 AN 102 MULTI PROBE CORROSION MONITORING SYSTEM written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2008, a new Multi-Probe Corrosion Monitoring System (MPCMS) was installed in double-shell tank 241-AN-102 on the U.S. Department of Energy's Hanford Site in Washington State. Developmental design work included laboratory testing in simulated tank 241-AN-102 waste to evaluate metal performance for installation on the MPCMS as secondary metal reference electrodes. The MPCMS design includes coupon arrays as well as a wired probe which facilitates measurement of tank potential as well as corrosion rate using electrical resistance (ER) sensors. This paper presents the MPCMS design, field data obtained following installation of the MPCMS in tank 241-AN-102, and a comparison between laboratory potential data obtained using simulated waste and tank potential data obtained following field installation.
Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.
Download or read book Sulphur Assisted Corrosion in Nuclear Disposal Systems written by Damien Féron and published by CRC Press. This book was released on 2020-11-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the different disposal concepts for high-level nuclear waste, corrosion of the metallic barriers and in particular the overpack/container is a major issue. It is imperative for performance assessment to predict the lifetime of these containers. In the lifetime prediction of metallic barriers for the disposal of high level nuclear waste (HLW) or of spent fuel, the presence of (reduced) sulphur species is an issue of growing importance, as the sulphur species are involved in localised corrosion phenomena. The international workshop on Sulphur-Assisted Corrosion in Nuclear Waste Disposal Systems (SACNUC2008) aimed to provide an exchange of information on the influence of sulphur species on the corrosion of metallic barriers. This workshop was a co-organisation of the Belgian Nuclear Research Centre, SCK*CEN, and the Belgian Agency for the Management of Radioactive Waste and Enriched Fissile Materials, ONDRAF/NIRAS, under the auspices of the European Federation of Corrosion (EFC event N 311). The proceedings are divided into five chapters: Chapter 1 provides a general overview of the disposal concepts of nuclear waste and the role of corrosion. Chapter 2 explains the mechanism of sulphur-induced corrosion processes. This chapter also contains information from outside the nuclear disposal field in which sulphur is known to act as a detrimental factor (e.g. oil and gas industry). Chapter 3 addresses the role of microbial processes in sulphur-assisted corrosion. Chapter 4 covers the modelling of sulphide-assisted corrosion. Chapter 5 is devoted to a panel discussion aiming to identify open issues in the investigation of sulphur-assisted corrosion phenomena and how to incorporate these in robust lifetime prediction of metallic barriers.
Download or read book Erosion corrosion induced Pipe Wall Thinning in US Nuclear Power Plants written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Erosion/corrosion in single-phase piping systems was not clearly recognized as a potential safety issue before the pipe rupture incident at the Surry Power Station in December 1986. This incident reminded the nuclear industry and the regulators that neither the US Nuclear Regulatory Commission (NRC) nor Section XI of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code require utilities to monitor erosion/corrosion in the secondary systems of nuclear power plants. This report provides a brief review of the erosion/corrosion phenomenon and its major occurrence in nuclear power plants. In addition, efforts by the NRC, the industry, and the ASME Section XI Committee to address this issue are described. Finally, results of the survey and plant audits conducted by the NRC to assess the extent of erosion/corrosion-induced piping degradation and the status of program implementation regarding erosion/corrosion monitoring are discussed. This report will support a staff recommendation for an additional regulatory requirement concerning erosion/corrosion monitoring. 21 refs., 3 tabs.
Download or read book Corrosion Monitoring in Industrial Plants Using Nondestructive Testing and Electrochemical Methods written by George C. Moran and published by ASTM International. This book was released on 1986 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Congress 12th Corrosion Control for Low Cost Reliability Held in Houston Texas on September 19 24 1993 Volume 6 Electric Power Industry written by and published by . This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Partial contents includes: (1) Cutting the cost of corrosion and fouling by real-time performance monitoring; (2) Service water electrochemical monitoring development at Ontario hydro; (3) On line monitoring of fireside corrosion on power plants; (4) Experience with neutron activation for a real- time corrosion monitoring in a urea plant; (5) Monitoring of microbiological activity in power plants; (6) Electrochemical monitoring of erosion-corrosion in multiphase flows; (7) Monitoring and prediction of environmentally assisted crack growth in stainless steel piping; (8) Corrosion monitoring using harmonic impedance spectroscopy; (9) An electrochemical sensor for oxygen and pH in Aqueous systems; (10) On line particulate iron and sulfur X-ray monitor; (11) On-line dissolution and analysis of corrosion products; (12) Remote monitoring of corrosion chemicals via fiber optic raman spectroscopy; and (13) Surface enhanced raman scattering as an in-reactor monitor of phenomena of interest to the nuclear power industry.
Download or read book Alternating Current Techniques for Corrosion Monitoring in Water Reactor Systems written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in both nuclear and fossil fueled steam generators is generally a consequence of the presence of aggressive impurities introduced into the coolant system through condenser leakage. The impurities concentrate in regions of the steam generator protected from coolant flow, in crevices or under deposited corrosion products and adjacent to heat transfer surfaces. These three factors, the aggressive impurity, crevice type areas and heat transfer surfaces appear to be the requirements for the onset of rapid corrosion. Under conditions where coolant impurities do not concentrate the corrosion rates are low, easily measured and can be accounted for by allowances in the design of the steam generator. Rapid corrosion conditions cannot be designed for and must be suppressed. The condition of the surfaces when rapid corrosion develops must be markedly different from those during normal operation and these changes should be observable using electrochemical techniques. This background formed the basis of a design of a corrosion monitoring device, work on which was initiated at BNL. The basic principles of the technique are described. The object of the work is to develop a corrosion monitoring device which can be operated with PWR steam generator secondary coolant feed water.
Download or read book Corrosion Management of Seawater Cooling Systems written by Francois Ropital and published by Elsevier. This book was released on 2024-06-28 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. Covers key technological developments in corrosion management of seawater cooling systems Includes coverage of seawater heat exchangers“/li> Provides information on many different forms of corrosion Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) Discusses maintenance, control, monitoring and inspection