Download or read book Corrosion Inhibition Performance of Methionine for CO2 Absorption Plants written by Balaji Udayappan and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic corrosion inhibitors including heavy metals have been widely used in the carbon dioxide (CO2) absorption process for corrosion control. However, they are not environmentally friendly causing costly handling and disposal costs. This work therefore evaluated corrosion inhibition performance of an organic amino acid compound, namely Methionine (MTI) which is less toxic, more readily biodegradable, and has lower potential for bioaccumulation in aquatic organisms compared to common amine absorption solvents. The evaluation was experimentally implemented using electrochemical and weight loss methods. Carbon steel (CS1018) and 5.0 kmol/m3 Monoethanolamine (MEA) purged with 85% CO2 and 15% oxygen (O2) were used as tested material and absorption solution, respectively. The electrochemical results showed that at solution temperatures up to 80oC, MTI effectively reduced corrosion rates of CS1018 with maximum inhibition efficiencies of 83.56% ± 1.82% under a static condition (0 rpm) and 74.96% ± 0.95% under a dynamic condition (1500 rpm). Its inhibition performance was found to increase with inhibitor concentration and solution temperature but decrease with rotational speed. MTI acted as a mixed-type inhibitor and exhibited pitting tendency. The optimal MTI concentrations were 1500 ppm at 0 rpm and 2000 ppm at 1500 rpm. The post data analysis involving adsorption isotherm and activation thermodynamic properties revealed that MTI protected metal surface by undergoing spontaneous and endothermic physical adsorption. Its adsorption characteristic matched well with the Langmuir adsorption isotherm, thereby suggesting that MTI formed a protective monolayer on the metal surface. The results of quantum chemical analysis suggested MTI has higher affinity, polarizability, and electron donating ability than MEA. III The results of weight loss experiments carried out for up to 28 days showed that at 120oC, 5 bar and 1500 rpm, MTI was able to reduce corrosion rates of CS1018 to below 1 mmpy. The inhibition efficiencies were up to 78.7% for carbon steel specimens fully immersed in the MEA solutions, 53.5% for those partially immersed in the MEA solution and partially exposed to vapor, and 85.6% for those fully exposed to vapor. Pits were observed on carbon steel specimens fully immersed in both uninhibited and MTI inhibited solutions.
Download or read book Corrosion Inhibition Performance of Sulfur and Nitrogen Based Environmentally Friendly Inhibitors for CO2 Absorption Plants written by Prathap Iyapazham Vaigunda Suba and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion in CO2 Absorption Process Using Aqueous Monoethanolamine piperazine Solution written by Manjula Nainar and published by . This book was released on 2007 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work explores the promise of aqueous solutions of blended monoethanolamine (MEA) and piperazine (PZ) as a cost-effective solvent for carbon dioxide (CO2) capture from industrial flue gas streams with respect to addressing corrosion, which is regarded as one of the most severe operational problems in typical CO2 capture plants. Two types of corrosion experiments were carried out in bench-scale setups, electrochemical tests for short-term exposure and weight loss tests for long-term exposure. The results show that the blended MEA/PZ solutions are more corrosive than the MEA solutions. The corrosion rate of carbon steel increases with concentration of PZ, total amine concentration, CO2 loading of solution, solution temperature, the presence of heat stable salts, and the presence of the proprietary oxidative degradation inhibitor (Inhibitor A provided by the University of Texas at Austin). Among the tested heat-stable salts, formate is the most corrosive salt, followed by acetate, oxalate, and thiosulfate in the absence of oxygen (O2), while acetate is the most corrosive salt followed by formate, oxalate, and thiosulfate in the presence of O2. Based on the level of corrosion rate found in the MEA/PZ system, corrosion control is required during plant operation to suppress the corrosion rate of carbon steel to below an acceptable level. Sodium metavanadate (NaVO3) and copper carbonate (CuCO3) were proven to be effective corrosion inhibitors with inhibition performance of up to 94-98%. Dissolved O2 is required in the solution to maintain active Cu2 or V5+, which, thus, prevents the metallic copper (Cu) from plating out or the formation of other oxidative states of vanadate. The performance of these two inhibitors can be deteriorated by the presence of heat-stable salts in the solutions.
Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Green Corrosion Inhibitors written by V. S. Sastri and published by John Wiley & Sons. This book was released on 2012-02-14 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book to cover developments in corrosion inhibitors is long overdue. This has been addressed by Dr Sastri in a book which presents fundamental aspects of corrosion inhibition, historical developments and the industrial applications of inhibitors. The book deals with the electrochemical principles and chemical aspects of corrosion inhibition, such as stability of metal complexes, the Hammett equation, hard and soft acid and base principle, quantum chemical aspects and Hansch' s model and also with the various surface analysis techniques, e.g. XPS, Auger, SIMS and Raman spectroscopy, that are used in industry for corrosion inhibition. The applications of corrosion inhibition are wide ranging. Examples given in this book include: oil and gas wells, petrochemical plants, steel reinforced cement, water cooling systems, and many more. The final chapters discuss economic and environmental considerations which are now of prime importance. The book is written for researchers in academia and industry, practicing corrosion engineers and students of materials science, engineering and applied chemistry.
Download or read book Corrosion Inhibitors Principles and Recent Applications written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-04-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To protect metals or alloys from corrosion, some methods can be used such as isolating the structure from the aggressive media or compensating the loss of electrons from the corroded structure. The use of corrosion inhibitors may include organic and inorganic compounds that adsorb on the metallic structure to isolate it from its surrounding media to decrease oxidation-reduction processes. This book collects new developments about corrosion inhibitors and their recent applications.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1969-09 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Download or read book Corrosion Prevention and Protection written by Edward Ghali and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Prevention and Protection: Practical Solutions presents a functional approach to the various forms of corrosion, such as uniform corrosion, pitting corrosion, crevice corrosion, galvanic corrosion, stress corrosion, hydrogen-induced damage, sulphide stress cracking, erosion-corrosion, and corrosion fatigue in various industrial environments. The book is split into two parts. The first, consisting of five chapters: Introduction and Principles (Fundamentals) of Corrosion Corrosion Testing, Detection, Monitoring and Failure Analysis Regulations, Specifications and Safety Materials: Metals, Alloys, Steels and Plastics Corrosion Economics and Corrosion Management The second part of the book consists of two chapters which present: a discussion of corrosion reactions, media, active and active-passive corrosion behaviour and the various forms of corrosion, a collection of case histories and practical solutions which span a wide range of industrial problems in a variety of frequently encountered environments, including statues & monuments, corrosion problems in metallurgical and mineral processing plants, boilers, heat exchangers and cooling towers, aluminum and copper alloys, galvanized steel structures as well as hydrogeological environmental corrosion This text is relevant to researchers and practitioners, engineers and chemists, working in corrosion in industry, government laboratories and academia. It is also suitable as a course text for engineering students as well as libraries related to chemical and chemical engineering institutes and research departments.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1966 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography of Agriculture written by and published by . This book was released on 1975 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Absorption Based Post Combustion Capture of Carbon Dioxide written by Paul Feron and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absorption-Based Post-Combustion Capture of Carbon Dioxide provides a comprehensive and authoritative review of the use of absorbents for post-combustion capture of carbon dioxide. As fossil fuel-based power generation technologies are likely to remain key in the future, at least in the short- and medium-term, carbon capture and storage will be a critical greenhouse gas reduction technique. Post-combustion capture involves the removal of carbon dioxide from flue gases after fuel combustion, meaning that carbon dioxide can then be compressed and cooled to form a safely transportable liquid that can be stored underground. Provides researchers in academia and industry with an authoritative overview of the amine-based methods for carbon dioxide capture from flue gases and related processes Editors and contributors are well known experts in the field Presents the first book on this specific topic
Download or read book Corrosion Inhibitors written by Esther Hart and published by Nova Science Publishers. This book was released on 2016 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses principles, mechanisms and applications of corrosion inhibitors. Chapter One focuses on organic corrosion inhibitors and their industrial applications. Chapter Two explores the application of polymer composites and nanocomposites as corrosion inhibitors for different metal substrates in different corrosive media. Chapter Three provides a review of corrosion inhibitors and a progress towards use of environmentally friendly corrosion inhibitors in the amine-based CO2 absorption process for acid gas treatment and carbon capture. Chapter Four studies the effectiveness of copaiba oil loaded on microemulsion systems as green corrosion inhibitors. Chapter Five addresses the mechanism of corrosion for APMMCs, and discusses different methods of inhibition to corrosion for APMMCs. Chapter Six focuses on the eletrochemical study of 1,3,4-triazolium-2-thiol as a corrosion inhibitor of mild steel in saline medium
Download or read book Gas liquid Reactions written by P. V. Danckwerts and published by . This book was released on 1970 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
