Download or read book Design and Analysis of Fatigue Resistant Welded Structures written by Dieter Radaj and published by Woodhead Publishing. This book was released on 1990-01-03 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An English version of a sucessful German book. Both traditional and modern concepts are described.
Download or read book Recommendations for Fatigue Design of Welded Joints and Components written by A. F. Hobbacher and published by Springer. This book was released on 2015-12-23 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
Download or read book IIW Recommendations for the HFMI Treatment written by Gary B. Marquis and published by Springer. This book was released on 2016-09-29 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of recommendations presents an overview of High Frequency Mechanical Impact (HFMI) techniques existing today in the market and their proper procedures, quality assurance measures and documentation. Due to differences in HFMI tools and the wide variety of potential applications, certain details of proper treatments and quantitative quality control measures are presented generally. An example of procedure specification as a quality assurance measure is given in the Appendix. Moreover, the book presents procedures for the fatigue life assessment of HFMI-improved welded joints based on nominal stress, structural hot spot stress and effective notch stress. It also considers the extra benefit that has been experimentally observed for HFMI-treated high-strength steels. The recommendations offer proposals on the effect of loading conditions like high mean stress fatigue cycles, variable amplitude loading and large amplitude/low cycle fatigue cycles. Special considerations for low stress concentration welded joints are also given. In order to demonstrate the use of the guideline, the book provides several fatigue assessment examples.
Download or read book Fatigue of Welded Structures written by Timothy Russell Gurney and published by CUP Archive. This book was released on 1979-12-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Fatigue of Welded Joints and Structures written by K Macdonald and published by Elsevier. This book was released on 2011-04-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. - Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process - Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure - Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures
Download or read book Fatigue and Fracture Testing of Weldments written by Harry I. McHenry and published by ASTM International. This book was released on 1990 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fifteen papers from a symposium held in Sparks, Nev., April 1988. They cover: low and high cycle fatigue, fatigue crack growth, corrosion fatigue, fracture toughness testing, and wide-plate testing. Annotation copyright Book News, Inc. Portland, Or.
Download or read book IIW Recommendations for the Fatigue Assessment of Welded Structures By Notch Stress Analysis written by W Fricke and published by Woodhead Publishing. This book was released on 2012-10-22 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notch stress approach for fatigue assessment of welded joints is based on the highest elastic stress at the weld toe or root. In order to avoid arbitrary or infinite stress results, a rounded shape with a reference radius instead of the actual sharp toe or root is usually assumed. IIW recommendations for the fatigue assessment of welded structures by notch stress analysis reviews different proposals for reference radii together with associated S-N curves. Detailed recommendations are given for the numerical analysis of notch stress by the finite or boundary element method. Several aspects are discussed, such as the structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states. Appropriate S-N curves are presented for the assessment of the fatigue strength of different materials. Finally, four examples illustrate the application of the approach as well as the variety of structures which can be analysed and the range of results that can be obtained from different models. Provides detailed recommendations for the number analysis of notch stress by the finite or boundary element method Discusses structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states Provides four comprehensive examples, illustrating the variety of structures which can be analysed and the range of results that can be obtained from different models
Download or read book Cumulative Damage of Welded Joints written by T R Gurney and published by Woodhead Publishing. This book was released on 2006-08-25 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue is a mechanism of failure which involves the formation and growth of cracks under the action of repeated stresses. Ultimately, a crack may propagate to such an extent that total fracture of the member may occur. To avoid fatigue it is essential to design the structure with inherent fatigue strength. However, fatigue strength for variable amplitude loading is not a constant material property and any calculations are necessarily built on a number of assumptions. Cumulative damage of welded joints explores the wealth of research in this important field and its implications for the design and manufacture of welded components.After an Introduction, chapter two introduces the constant amplitude database, which contains results obtained in test conditions and which forms the basis of the basic S-N curves for various types of joint. Chapter three discusses the influence of residual stresses which can have a marked effect on fatigue behaviour. Chapter four explores variable amplitude loading and the problem of how information from laboratory tests, obtained under constant amplitude conditions, can be applied to the design of structures for service conditions. This problem is further investigated in the next chapter which is devoted to two and three level load testing. Chapters six, seven and eight look at the influence that the variety of variable loading spectra can have on fatigue strength, whether narrow or wide band loading or cycles of small stress range. Taking all of this knowledge, chapter nine discusses structure designs.Cumulative damage of welded joints is a comprehensive source of invaluable information for welding engineers, supervisors, inspection personnel and designers. It will also be of great interest for academics working in the fields of structural and mechanical engineering. - Covers the wealth of research in the field of fatigue strength and its role in the design and manufacture of welded components - Invaluable reference source for welding engineers, supervisors, inspection personnel and designers
Download or read book Structural Hot Spot Stress Approach to Fatigue Analysis of Welded Components written by Erkki Niemi and published by Springer. This book was released on 2017-08-28 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress
Download or read book Fatigue Assessment of Welded Joints by Local Approaches written by Dieter Radaj and published by Woodhead Publishing. This book was released on 2006-10-30 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. - Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods - Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. - Written by a distinguished team of authors
Download or read book Corrosion Fatigue written by T. W. Crooker and published by ASTM International. This book was released on 1983 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue 96 written by G. Lütjering and published by Elsevier. This book was released on 1996-05-20 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the 6th International Fatigue Congress, besides covering the entire field of fatigue, was to promote the intimate connection between basic science and engineering application by the selection of appropriate session topics.Fatigue is the main cause of failure of engineering structures and components. Making reliable fatigue predictions is highly difficult because knowledge about fatigue mechanisms in all stages of the fatigue process must be developed much further. In addition, the decreasing availability of raw materials and energy resources forces engineers to continually reduce the weight of constructions. This congress presents research results also particularly for new materials, including composites. Researchers, on the other hand, are confronted with the engineering demands. Futhermore, the overwhelming development which is presently taking place in the field of computer software and hardware dealing with fatigue problems is outlined along with the directions of future developments in all areas of fatigue.Close to 300 fully peer-reviewed papers are published in the proceedings, including nearly 30 overview and keynote papers covering the various session topics. The proceedings should therefore serve as a comprehensive review of the fatigue field at the present state-of-the-art, suitable for scientists, engineers and students.
Download or read book IIW Recommendations On Methods for Improving the Fatigue Strength of Welded Joints written by P J Haagensen and published by Woodhead Publishing. This book was released on 2013-01-25 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength
Download or read book Behavior of Materials Under Conditions of Thermal Stress written by S. S. Manson and published by . This book was released on 1953 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review is presented of available information on the behavior of brittle and ductile materials under conditions of thermal stress and thermal shock. For brittle materials, a simple formula relating physical properties to thermal-shock resistance are derived and used to determine the relative significance of two indices currently in use for rating materials. The importance of simulating operating conditions in thermal-shock testing is deduced from the formula and is experimentally illustrated by showing that BeO could be both inferior or superior to Al2O3 in thermal shock depending on the testing conditions. For ductile materials, thermal-shock resistance depends upon the complex interrelation among several metallurgical variables which seriously affect strength and ductility. These variables are briefly discussed and illustrated from literature sources. The importance of simulating operating conditions in tests for rating ductile materials is especially to be emphasized because of the importance of testing conditions in metallurgy. A number of practical methods that have been used to minimize the deleterious effects of thermal stress and thermal shock are outlined.
Download or read book Corrosion Fatigue Mechanics Metallury Eletrochemistry and Engineering written by and published by ASTM International. This book was released on with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metric Conversion Card written by United States. National Bureau of Standards and published by . This book was released on 1972 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:
