Download or read book Absorption Based Post Combustion Capture of Carbon Dioxide written by Paul Feron and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absorption-Based Post-Combustion Capture of Carbon Dioxide provides a comprehensive and authoritative review of the use of absorbents for post-combustion capture of carbon dioxide. As fossil fuel-based power generation technologies are likely to remain key in the future, at least in the short- and medium-term, carbon capture and storage will be a critical greenhouse gas reduction technique. Post-combustion capture involves the removal of carbon dioxide from flue gases after fuel combustion, meaning that carbon dioxide can then be compressed and cooled to form a safely transportable liquid that can be stored underground. - Provides researchers in academia and industry with an authoritative overview of the amine-based methods for carbon dioxide capture from flue gases and related processes - Editors and contributors are well known experts in the field - Presents the first book on this specific topic

Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.

Download or read book Advanced CO2 Capture Technologies written by Shin-ichi Nakao and published by Springer. This book was released on 2019-05-07 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarises the advanced CO2 capture technologies that can be used to reduce greenhouse gas emissions, especially those from large-scale sources, such as power-generation and steel-making plants. Focusing on the fundamental chemistry and chemical processes, as well as advanced technologies, including absorption and adsorption, it also discusses other aspects of the major CO2 capture methods: membrane separation; the basic chemistry and process for CO2 capture; the development of materials and processes; and practical applications, based on the authors’ R&D experience. This book serves as a valuable reference resource for researchers, teachers and students interested in CO2 problems, providing essential information on how to capture CO2 from various types of gases efficiently. It is also of interest to practitioners and academics, as it discusses the performance of the latest technologies applied in large-scale emission sources.

Download or read book Carbon Dioxide Chemistry Capture and Oil Recovery written by Iyad Karamé and published by BoD – Books on Demand. This book was released on 2018-08-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels still need to meet the growing demand of global economic development, yet they are often considered as one of the main sources of the CO2 release in the atmosphere. CO2, which is the primary greenhouse gas (GHG), is periodically exchanged among the land surface, ocean, and atmosphere where various creatures absorb and produce it daily. However, the balanced processes of producing and consuming the CO2 by nature are unfortunately faced by the anthropogenic release of CO2. Decreasing the emissions of these greenhouse gases is becoming more urgent. Therefore, carbon sequestration and storage (CSS) of CO2, its utilization in oil recovery, as well as its conversion into fuels and chemicals emerge as active options and potential strategies to mitigate CO2 emissions and climate change, energy crises, and challenges in the storage of energy.

Download or read book Post combustion CO2 Capture Technology written by Helei Liu and published by Springer. This book was released on 2018-09-25 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of the latest information on all aspects of the post-combustion carbon capture process. It provides designers and operators of amine solvent-based CO2 capture plants with an in-depth understanding of the most up-to-date fundamental chemistry and physics of the CO2 absorption technologies using amine-based reactive solvents. Topics covered include the physical properties, chemical analysis, reaction kinetics, CO2 solubility, and innovative configurations of absorption and stripping columns as well as information on technology applications. This book also examines the post-build operational issues of corrosion prevention and control, solvent management, solvent stability, solvent recycling and reclaiming, intelligent monitoring and plant control including process automation. In addition, the authors discuss the recent insights into the theoretical basis of plant operation in terms of thermodynamics, transport phenomena, chemical reaction kinetics/engineering, interfacial phenomena, and materials. The insights provided help engineers, scientists, and decision makers working in academia, industry and government gain a better understanding of post-combustion carbon capture technologies.

Download or read book Membrane Contactors Fundamentals Applications and Potentialities written by Enrico Drioli and published by Elsevier. This book was released on 2011-08-30 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Contactors: Fundamentals, Applications and Potentialities, Volume 11 covers new operations that could be efficiently used to improve the performance of a variety of industrial production cycles in applications ranging from biotechnology to agrofood. This book focuses on the basic "principles of work": required membrane materials and properties; major operating parameters; the importance of module configuration and design and; the performance of membrane contactors in specific processes. The authors' dynamic approach to this subject makes Membrane Contactors: Fundamentals, Applications and Potentialities, Volume 11 the most comprehensive book currently available on all aspects related to the 'membrane contactor world.* Describes new unit operations in process engineering* Covers a wide variety of industrial applications, from biotechnology to agrofood* Applicable to process intensification and sustainable growth strategies

Download or read book Corrosion and Degradation of Metallic Materials written by François Ropital and published by Editions technip. This book was released on 2010 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second section describes the various techniques used in the petroleum industry to protect metallic materials, to detect and to monitor corrosion, in a manner readily accessible to non-specialist readers. --

Download or read book Process Systems and Materials for CO2 Capture written by Athanasios I. Papadopoulos and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume brings together an extensive collection of systematic computer-aided tools and methods developed in recent years for CO2 capture applications, and presents a structured and organized account of works from internationally acknowledged scientists and engineers, through: Modeling of materials and processes based on chemical and physical principles Design of materials and processes based on systematic optimization methods Utilization of advanced control and integration methods in process and plant-wide operations The tools and methods described are illustrated through case studies on materials such as solvents, adsorbents, and membranes, and on processes such as absorption / desorption, pressure and vacuum swing adsorption, membranes, oxycombustion, solid looping, etc. Process Systems and Materials for CO2 Capture: Modelling, Design, Control and Integration should become the essential introductory resource for researchers and industrial practitioners in the field of CO2 capture technology who wish to explore developments in computer-aided tools and methods. In addition, it aims to introduce CO2 capture technologies to process systems engineers working in the development of general computational tools and methods by highlighting opportunities for new developments to address the needs and challenges in CO2 capture technologies.

Download or read book Handbook of Climate Change Mitigation written by Wei-Yin Chen and published by Springer. This book was released on 2012-02-13 with total page 2130 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a mounting consensus that human behavior is changing the global climate and its consequence could be catastrophic. Reducing the 24 billion metric tons of carbon dioxide emissions from stationary and mobile sources is a gigantic task involving both technological challenges and monumental financial and societal costs. The pursuit of sustainable energy resources, environment, and economy has become a complex issue of global scale that affects the daily life of every citizen of the world. The present mitigation activities range from energy conservation, carbon-neutral energy conversions, carbon advanced combustion process that produce no greenhouse gases and that enable carbon capture and sequestion, to other advanced technologies. From its causes and impacts to its solutions, the issues surrounding climate change involve multidisciplinary science and technology. This handbook will provide a single source of this information. The book will be divided into the following sections: Scientific Evidence of Climate Change and Societal Issues, Impacts of Climate Change, Energy Conservation, Alternative Energies, Advanced Combustion, Advanced Technologies, and Education and Outreach.

Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. - Explores key CO2 separation and compare technologies in terms of provable advantages and limitations - Analyzes all critical CO2 capture methods in tandem with related technologies - Introduces a panorama of various applications of CO2 capture

Download or read book Corrosion in CO2 Capture Transportation Geological Utilization and Storage written by Liwei Zhang and published by Springer Nature. This book was released on 2023-07-21 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically discusses the operational stages with high risk of CO2-induced corrosion in CCUS projects, and related measures for corrosion control. CO2 capture, utilization, and storage (CCUS) is a key technology to mitigate climate change and substantially reduce greenhouse gas emissions from fossil fuels. CCUS deals with high concentration CO2, which is very corrosive in a humid environment. Therefore, it is very important to characterize, monitor, and mitigate CO2-induced corrosion in all processes of the CCUS operation chain. Some corrosion control techniques included in this book (e.g., CO2-resisting wellbore cement additives) are beneficial for corrosion control research and engineering practices. This book belongs to the field of corrosion science and engineering, and the expected readership is researchers and engineers working on CCUS.

Download or read book Carbon Dioxide Capture and Conversion written by Sonil Nanda and published by Elsevier. This book was released on 2022-07-28 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Capture and Conversion: Advanced Materials and Process provides information about the fundamental principles and recent development of various methods and processes for CO2 mitigation and transformation. Beginning with a brief overview of recent advancements in CO2 capture and valorization technologies, the book elaborates on CO2 capture and conversion by covering nanoporous materials, biomaterials, innovative solvents, advanced membrane technology, nanocatalyst synthesis and design, cutting-edge characterization techniques as well as reaction mechanisms and kinetics. In addition to techno-economic evaluation and life-cycle assessment for CO2 capture and conversion processes, future perspectives, opportunities and current challenges regarding these processes in terms of their industrial applications, are systematically discussed. Carbon Dioxide Capture and Conversion: Advanced Materials and Process is, therefore, an essential resource for academic researchers, postgraduates, scientists, and engineers seeking fundamental knowledge and practical applications for use in their research and development, studies and industrial operations. - Includes recent developments in nanomaterials and advanced processes implemented for CO2 capture and conversion - Contains state-of-the-art CO2 capture and conversion technology written by leading experts - Offers advanced techniques of nanomaterials synthesis, characterization, evaluation, and industrial implementation in a wide range of CO2 capture and conversion processes

Download or read book Gas Capture Processes written by Zhien Zhang and published by MDPI. This book was released on 2020-12-14 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the recent technologies introduced for gases capture including CO2, CO, SO2, H2S, NOx, and H2. Various processes and theories for gas capture and removal are presented. The book provides a useful source of information for engineers and specialists, as well as for undergraduate and postgraduate students in the fields of environmental and chemical science and engineering.

Download or read book Climate Change 2014 written by Groupe d'experts intergouvernemental sur l'évolution du climat and published by . This book was released on 2015 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Primer on the Taguchi Method Second Edition written by Ranjit K. Roy and published by Society of Manufacturing Engineers. This book was released on 2010 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the completely revised second edition, additional chapters and more case studies add to the clear, simple, and essentially non-mathematical presentation of the basic concepts, techniques, and applications of the renowned Taguchi approach. This practical guide introduces the fundamentals of Taguchi experimental design and shows engineers how to design, analyze, and interpret experiments for a wide range of common products and processes. What Readers Are Saying "...a clear, step-by-step guide to the Taguchi design of experiments method. The careful descriptions, calculations, and examples demonstrate the versatility of these practical and powerful tools." —Fred Schenkelberg, Consultant, FMS Reliability, Los Gatos, California "Dr. Roy presents the theory and relates it to practical examples, explaining difficult concepts in an understandable manner. This is an easy-to-read, right-on-the-mark guide to understanding and applying Taguchi robust design and DOE. Readers will find these techniques extremely useful, practical, and easily applied to the daily job." —George Li, Process Improvement Manager, Research in Motion, Waterloo, Ontario, Canada "The book has a detailed discussion of Taguchi methods that are not covered in great detail in many books on DOE." —Frederick H. Long, President, Spectroscopic Solutions, LLC, Randolph, New Jersey "Dr. Roy's name is instantly associated with Taguchi methodologies in the manufacturing industries. His skill set is also being recognized for project management instruction. The new edition includes more easy-to-follow descriptions and examples." —Andrea Stamps, Engineering Specialist, Six Sigma Master Black Belt, General Dynamics, Southfield, Michigan "Research engineers, process development engineers, pilot plant engineers, design engineers, national research labs and academic research laboratories should use this book extensively. It's a practical textbook on how to maximize output with minimal use of resources." —Dr. Naresh Mahamuni, Research Associate, North Carolina A&T University, Greensboro, North Carolina "Dr. Roy has many years of practical experience helping engineers understand and improve their engineering, reliability, and problem-solving skills using Dr. Taguchi's ideas. He anticipates questions engineers would ask and provides information exactly when it is needed." —Larry R. Smith, Quality and Reliability Manager (retired), Ford Motor Co., Dearborn, Michigan "A large number of examples support the contents. Case studies are enumerated, which is a strength of the book." —Dr. Pradeep Kumar, Professor and Head, Dept. of Mechanical and Industrial Engineering, IIT Roorkee, Uttarakhand, India "Dr. Roy's book lists many application examples that can help engineers use the Taguchi method effectively." —Dr. Side Zhao, Control Engineer, NACCO Materials Handling Group, Portland, Oregon "The author's experience on the topic is what makes this book very useful as a principal reference in teaching the Taguchi method in quality engineering." —Dr. Carlos Diaz Ramos, Research Professor, Instituto Tecnologico de Orizaba and Universidad Veracruzana, Mexico "The author is able to explain concepts in a very knowledgeable yet down-to-earth and systematic manner. The material is very well organized." —Kush Shah, Manager, Alternative Propulsion Technology Quality, General Motors, LLC, Pontiac, Michigan "This book is a valuable introductory text in Taguchi methods with a number of illustrative examples and case studies that make the concepts clearer than books with theory only." —Dr. R. Mahalinga Iyer, Senior Lecturer, Queensland University of Technology, Brisbane, Queensland, Australia.

Download or read book Recent Progress and New Developments in Post combustion Carbon capture Technology with Reactive Solvents written by Future Science Ltd and published by . This book was released on 2013 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Capture and Storage written by Steve A. Rackley and published by Butterworth-Heinemann. This book was released on 2017-09-05 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture and Storage, Second Edition, provides a thorough, non-specialist introduction to technologies aimed at reducing greenhouse gas emissions from burning fossil fuels during power generation and other energy-intensive industrial processes, such as steelmaking. Extensively revised and updated, this second edition provides detailed coverage of key carbon dioxide capture methods along with an examination of the most promising techniques for carbon storage. The book opens with an introductory section that provides background regarding the need to reduce greenhouse gas emissions, an overview of carbon capture and storage (CCS) technologies, and a primer in the fundamentals of power generation. The next chapters focus on key carbon capture technologies, including absorption, adsorption, and membrane-based systems, addressing their applications in both the power and non-power sectors. New for the second edition, a dedicated section on geological storage of carbon dioxide follows, with chapters addressing the relevant features, events, and processes (FEP) associated with this scenario. Non-geological storage methods such as ocean storage and storage in terrestrial ecosystems are the subject of the final group of chapters. A chapter on carbon dioxide transportation is also included. This extensively revised and expanded second edition will be a valuable resource for power plant engineers, chemical engineers, geological engineers, environmental engineers, and industrial engineers seeking a concise, yet authoritative one-volume overview of this field. Researchers, consultants, and policy makers entering this discipline also will benefit from this reference. - Provides all-inclusive and authoritative coverage of the major technologies under consideration for carbon capture and storage - Presents information in an approachable format, for those with a scientific or engineering background, as well as non-specialists - Includes a new Part III dedicated to geological storage of carbon dioxide, covering this topic in much more depth (9 chapters compared to 1 in the first edition) - Features revisions and updates to all chapters - Includes new sections or expanded content on: chemical looping/calcium looping; life-cycle GHG assessment of CCS technologies; non-power industries (e.g. including pulp/paper alongside ones already covered); carbon negative technologies (e.g. BECCS); gas-fired power plants; biomass and waste co-firing; and hydrate-based capture