Download or read book Corrosion and Scale Handbook written by J. R. Becker and published by PennWell Books. This book was released on 1998 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and scale in crude oil systems are two of the most costly problems facing oil companies, which go to great expense to effectively control the problems. Corrodible surfaces are found throughout production, transport, and refining equipment. Therefore, the protection of this equipment is critical to the profitability and successful operation of these companies. While scale control ranks lower in importance, its presence is also costly in terms of equipment damage. This book provides understanding of these processes, their impact on petroleum companies, and potential solutions and inhibitors.
Download or read book Handbook of Corrosion Inhibitors written by Michael Ash and published by . This book was released on 2001 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes almost 3800 trade name and generic chemicals used to prevent and remove corrosion and rust. Coverage includes chemicals that function as:Acid inhibitors; Antideposition aids; Corrosion inhibitors; Corrosion and rust intermediates; Dispersants; Film-formersRust inhibitors; Rust removers; Neutralizers; Metal deactivators; Oxygen scavengers; pH adjusters; Phosphatizers Protectants; Scale inhibitors; Water repellentsIn these Application Areas: Boiler water systems; Cement/Concrete; Consumer packaging; Cooling water systems; Dry cleaning processes Ferrous/Nonferrous metals; Food processing; Fuel additives Industrial/Consumer equipment; Lubricating systems Metalworking fluids; Oil field applications; Paints/Coatings Pigments Pulp/Paper processing; Wastewater treatment.
Download or read book Uhlig s Corrosion Handbook written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2011-05-18 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanomaterials, and dental materials, anodic protection. Also featured are chapters dealing with standards for corrosion testing, microbiological corrosion, and electrochemical noise.
Download or read book Corrosion and Corrosion Protection Handbook Second Edition written by Schweitzer and published by Routledge. This book was released on 2017-09-20 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing to provide excellent, state-of-the-art information on corrosion and practicalsolutions for reducing corrosion, the Second Edition contains valuable suggestionson how to select the best construction material for a specific application . . . choose anappropriate initial design to avoid inherent corrosion pitfalls . .. determine whatcorrosion problems may exist or develop, as well as the possible extent of the problems. .. and establish practices to monitor corrosion of existing equipment.In addition to significantly revising and expanding all chapters to reflect recent progressin the field, such as the development of materials for pollution control and methods ofcontrolling/preventing corrosion, Corrosion and Corrosion ProtectionHandbook, Second Edition features detailed discussions on such new topics asatmospheric corrosion, designing to prevent corrosion, sheet linings, and corrosioninhibitors.
Download or read book Corrosion Engineering Handbook 3 Volume Set written by Philip A. Schweitzer P.E. and published by CRC Press. This book was released on 2018-10-03 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion can be both costly and dangerous, resulting in product contamination or loss as well as structural instability and premature failure. This handbook contains information necessary for ensuring that, regardless of the structure being built, the materials selected for construction will minimize corrosion and its consequences. Nearly t
Download or read book The Corrosion Handbook written by Herbert Henry Uhlig and published by . This book was released on 1948 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Handbook written by Herbert H. Uhlig and published by . This book was released on 1948-01-15 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific data and industrial experience concerned primarily with corrosion protection.
Download or read book The Corrosion Handbook written by Herbert Henry Uhlig and published by . This book was released on 1963 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Handbook of Science Engineering of Green Corrosion Inhibitors written by Chandrabhan Verma and published by Elsevier. This book was released on 2021-11-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Science and Engineering of Green Corrosion Inhibitors: Modern Theory, Fundamentals and Practical Applications presents developments in green corrosion inhibitors and current applications. The book provides an overview of green corrosion inhibitors such as plant extracts, chemical medicines, natural polymers, synthetic green compounds, carbohydrates, amino acids and oleochemicals that can cost-effectively minimize corrosive damage. The book handles several compounds used as anticorrosive materials for different metals and alloys in a versatile corrosive environment. Sections address the fundamental characteristics of green corrosion inhibition and deal with the economic impact of corrosion and forms of corrosion, while also assessing and classifying corrosion inhibitors. The book covers a broad range of applications in green corrosion inhibition and concludes with new emerging trends in corrosion protection such as high temperature corrosion and its protection and nanomaterials as corrosion inhibitors. - Provides an overview of environmentally sustainable (green) corrosion inhibitors utilized in modern industrial platforms - Evaluates corrosion inhibitors as prime options for sustainable and transformational opportunities - Serves as a valuable reference for scientists and engineers who are searching modern design for corrosion inhibitors - Covers both synthetic and natural environmentally-friendly corrosion inhibitors
Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.
Download or read book Uhlig s Corrosion Handbook written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanomaterials, and dental materials, anodic protection. Also featured are chapters dealing with standards for corrosion testing, microbiological corrosion, and electrochemical noise.
Download or read book Handbook of Corrosion Engineering 2 E written by Pierre R. Roberge and published by McGraw Hill Professional. This book was released on 2012-01-26 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE MOST COMPLETE, UP-TO-DATE CORROSION CONTROL REFERENCE Fully revised throughout, Handbook of Corrosion Engineering, Second Edition discusses the latest advances in corrosion-resistant materials, methods, and protective coatings. This comprehensive resource covers all aspects of corrosion damage, including detection, monitoring, prevention, and control. Written by a world-renowned expert on the subject, the book helps you to select materials and resolve design issues where corrosion is considered a factor. Understand, predict, evaluate, mitigate, and correct corrosion problems with help from this authoritative guide. Coverage includes: Aqueous corrosion High-temperature corrosion Atmospheric, water, seawater, soil, concrete, and microbial environments Modeling, life prediction, and computer applications Identifying and inspecting corrosion failures Corrosion maintenance through inspection and monitoring Corrosion testing Selection and design of engineering materials Protective coatings and corrosion inhibitors Cathodic and anodic protection
Download or read book Corrosion Engineering Handbook Second Edition 3 Volume Set written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 1996-07-17 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers information on all types of corrosion, corrosion theory and the major materials of construction used for reducing corrosion, including metals, plastics, linings, coatings, elastomers and masonry products. The text provides analyses of corrosion testing techniques, materials handling and fabrication procedures, on-stream and off-stream corrosion monitoring, design methods that prevent or control corrosion, and more.
Download or read book Handbook of Corrosion Data written by Bruce D. Craig and published by ASM International. This book was released on 1994-12-31 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes it easy for you to find what effect environment has on the corrosion of metals and alloys. However, this volume offers information on additional environments including concrete, soil, groundwater, distilled water, sodium acetate and more. ThereAs also updated and expanded coverage of previously discussed environments as well as information on environments which deal with the dairy, food, brewing, aerospace, petrochemical and building industries. The environments are listed alphabetically. Each listing includes a general description of the conditions, a comment on the corrosion characteristics of various alloys in such a situation, a bibliography of recent articles specific to the environment, tables consolidating and comparing corrosion rates at various temperatures and concentrations for various alloys, and graphical information. Also included are summaries on the general corrosion characteristics of major metals and alloys.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Handbook of Corrosion Engineering Third Edition written by Pierre R. Roberge and published by McGraw Hill Professional. This book was released on 2019-07-08 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most complete corrosion control reference on the market―thoroughly revised for the latest advances This fully updated guide offers complete coverage of the latest corrosion-resistant materials, methods, and technologies. Written by a recognized expert on the subject, the book covers all aspects of corrosion damage, including detection, monitoring, prevention, and control. You will learn how to select materials and resolve design issues where corrosion is a factor. Handbook of Corrosion Engineering, Third Edition shows, step by step, how to understand, predict, evaluate, mitigate, and correct corrosion problems. This edition provides a new focus on the management of corrosion problems and draws on methodologies and examples from the 2016 IMPACT report. A new chapter discusses corrosion management across governments and industries. Coverage includes: • The functions and roles of a corrosion engineer • Atmospheric corrosion and mapping atmospheric corrosivity • Corrosion in waste water treatment and in water and soils • Corrosion of reinforced concrete • Microbes and biofouling • High-temperature corrosion • Modeling corrosion processes and life prediction • Corrosion failures • Corrosion maintenance through inspection and monitoring • Corrosion management across governments and industries • Selection and design considerations for engineering materials • Protective coatings and corrosion inhibitors • Cathodic and anodic protection
