Download or read book Core Analysis written by Colin McPhee and published by Elsevier. This book was released on 2015-12-10 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Core Analysis: A Best Practice Guide is a practical guide to the design of core analysis programs. Written to address the need for an updated set of recommended practices covering special core analysis and geomechanics tests, the book also provides unique insights into data quality control diagnosis and data utilization in reservoir models. The book's best practices and procedures benefit petrophysicists, geoscientists, reservoir engineers, and production engineers, who will find useful information on core data in reservoir static and dynamic models. It provides a solid understanding of the core analysis procedures and methods used by commercial laboratories, the details of lab data reporting required to create quality control tests, and the diagnostic plots and protocols that can be used to identify suspect or erroneous data. - Provides a practical overview of core analysis, from coring at the well site to laboratory data acquisition and interpretation - Defines current best practice in core analysis preparation and test procedures, and the diagnostic tools used to quality control core data - Provides essential information on design of core analysis programs and to judge the quality and reliability of core analysis data ultimately used in reservoir evaluation - Of specific interest to those working in core analysis, porosity, relative permeability, and geomechanics
Download or read book Coring and Core Analysis Handbook written by Gene Anderson and published by . This book was released on 1975 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coring and Core Analysis Handbook written by Gene Anderson (Writer on core drilling) and published by . This book was released on 1975 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Working Guide to Reservoir Engineering written by William Lyons and published by Gulf Professional Publishing. This book was released on 2009-09-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Reservoir Engineering provides an introduction to the fundamental concepts of reservoir engineering. The book begins by discussing basic concepts such as types of reservoir fluids, the properties of fluid containing rocks, and the properties of rocks containing multiple fluids. It then describes formation evaluation methods, including coring and core analysis, drill stem tests, logging, and initial estimation of reserves. The book explains the enhanced oil recovery process, which includes methods such as chemical flooding, gas injection, thermal recovery, technical screening, and laboratory design for enhanced recovery. Also included is a discussion of fluid movement in waterflooded reservoirs. - Predict local variations within the reservoir - Explain past reservoir performance - Predict future reservoir performance of field - Analyze economic optimization of each property - Formulate a plan for the development of the field throughout its life - Convert data from one discipline to another - Extrapolate data from a few discrete points to the entire reservoir
Download or read book Coring Methods and Systems written by Rahman Ashena and published by Springer. This book was released on 2018-05-02 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to downhole rock sampling and coring concepts, methods, systems, and procedures for practitioners and researchers. Its chapters are based upon years of extensive studies and research about the coring methods and via direct and continuous communication and consultation obtained from various service and operator companies such as Baker Hughes GE, NOV, OMV, and Sandvik. The contributors discuss the state-of-the-art coring methods and systems (mainly used in the petroleum industry), which include: · conventional coring; · wireline continuous coring; · invasion mitigation coring (low invasion, gel coring, sponge coring); · jam-detection, anti-jamming, full closure; · safe-coring and tripping; · oriented-coring; · pressure/in-situ coring; · logging-while-coring; · motor coring; · mini-coring; · coiled Tubing Coring; and · underbalanced coring. The contributors provide practical and applicable understanding of the procedures of these coring methods and systems, as well as the specific core barrel components, working mechanisms, and schematics of the tools and processes used. Because Coring Methods and Systems analyses and compares the core barrels used in both petroleum and mining industries, it enhances the communication and may allow knowledge transfer between the two industries. As core damage is a serious issue during coring and handling jeopardizing correct calibration of exploration data, Coring Methods and Systems has greatly focused on its identification and its mitigation. Therefore, it can be used as an ideal source for geologists, core analysts, and reservoir engineers, to ensure the retrieval of high-quality cores.
Download or read book Properties of Reservoir Rocks Core Analysis written by R.P. Monicard and published by Springer. This book was released on 2014-11-14 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petrophysics written by Steve Cannon and published by John Wiley & Sons. This book was released on 2015-11-09 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petrophysics is the science of evaluating the rock and fluid properties of oil, gas and water reservoirs through the acquisition of physical samples, electrical, chemical, nuclear and magnetic data acquired by surface logging, downhole coring, and drilling and wireline sondes. The evaluation, analysis and interpretation of this data is as much an art as a science as it requires an understanding of geology, chemistry, physics, electronics, mechanics and drilling technology. The techniques have been developed over the last 100 years primarily by the oil and gas industry, but the principles are equally relevant in coal mining, hydrogeology and environmental science. This book is firmly aimed at students of geology and petroleum engineering looking for a practical understanding of the background and workflows required to complete a petrophysical study of a well, a reservoir or a field. Petrophysics is log analysis constrained by geology, and if we ignore the rocks we risk making poor investment decisions.
Download or read book Cores and Core Logging for Geoscientists written by Graham A. Blackbourn and published by . This book was released on 2012 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition has been brought up-to-date and incorporates modern developments in coring techniques and core handling. All aspects of cores are covered including cutting and recovery; wellsite handling and logging; recognition of coring damage; laboratory analysis; logging and sampling; preservation and storage. Logging and interpretation are dealt with in detail, encompassing structural and engineering investigations in addition to sedimentology. Emphasis is laid throughout on those features most important to the economical development of geological resources. --
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Petroleum Engineering written by and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for this book has arisen from demand for a current text from our students in Petroleum Engineering at Imperial College and from post-experience Short Course students. It is, however, hoped that the material will also be of more general use to practising petroleum engineers and those wishing for aa introduction into the specialist literature. The book is arranged to provide both background and overview into many facets of petroleum engineering, particularly as practised in the offshore environments of North West Europe. The material is largely based on the authors' experience as teachers and consultants and is supplemented by worked problems where they are believed to enhance understanding. The authors would like to express their sincere thanks and appreciation to all the people who have helped in the preparation of this book by technical comment and discussion and by giving permission to reproduce material. In particular we would like to thank our present colleagues and students at Imperial College and at ERC Energy Resource Consultants Ltd. for their stimulating company, Jill and Janel for typing seemingly endless manuscripts; Dan Smith at Graham and Trotman Ltd. for his perseverence and optimism; and Lesley and Joan for believing that one day things would return to normality. John S. Archer and Colin G. Wall 1986 ix Foreword Petroleum engineering has developed as an area of study only over the present century. It now provides the technical basis for the exploitation of petroleum fluids in subsurface sedimentary rock reservoirs.
Download or read book Reservoir Engineering Handbook written by Tarek H. Ahmed and published by Gulf Professional Publishing. This book was released on 2001 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book wxplains the fundamentals of reservoir engineering and their practical application in conducting a comprehensive field study.Two new chapters have been included in this second edition: chapter 14 and 15.
Download or read book Standard Handbook of Petroleum Natural Gas Engineering written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents the mathematics and general engineering and science of petroleum engineering. It also examines the auxiliary equipment and provides coverage of all aspects of drilling and well completion.
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering Volume 2 written by William C. Lyons and published by Elsevier. This book was released on 1996-10-16 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline. Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily. The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes. More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.
Download or read book Drilling Engineering Handbook written by E.H. Austin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamental principles of drilling en gineering, with the primary objective of making a good well using data that can be properly evaluated through geology, reservoir engineering, and management. It is written to assist the geologist, drilling engineer, reservoir engineer, and manager in performing their assignments. The topics are introduced at a level that should give a good basic understanding of the subject and encourage further investigation of specialized interests. Many organizations have separate departments, each per forming certain functions that can be done by several methods. The reentering of old areas, as the industry is doing today, particularly emphasizes the necessity of good holes, logs, casing design, and cement job. Proper planning and coordination can eliminate many mistakes, and I hope the topics discussed in this book will playa small part in the drilling of better wells. This book was developed using notes, comments, and ideas from a course I teach called "Drilling Engineering with Offshore Considerations." Some "rules of thumb" equations are used throughout, which have proven to be helpful when applied in the ix x / Preface proper perspective. The topics are presented in the proper order for carrying through the drilling of a well.
Download or read book Mud Logging Handbook written by Alun Whittaker and published by . This book was released on 1991 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coring and Core Analysis written by Tamara Kull and published by University of Texas at Austin Petroleum. This book was released on 1984 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series was reviewed by a subcommittee of the API Advisory Committee for the School of Production Technology and approved by the instructor of the topic covered. Each book is divided into sections that consist of learning objectives, instructional text, and a test. A glossary and an answer key are included. Describes coring operations; methods of core preservation, sampling, and preparation for analysis; and core analysis, including determination of porosity, permeability, and saturation.
