Download or read book Cooperative Design of Manufacturing Systems in SMEs written by Dörte Bastian-Köpp and published by GITO mbH Verlag. This book was released on 2009 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planning and improving of production systems and manufacturing processes is a most complex task in engineering. In small and medium sized enterprises (SME's) it is usually carried out by a group of enterprise planners from different departments within a planning project. The main issue of this research is to overcome the logical and technical boundaries between the highly-interrelated modelling experts and their specific modelling tools and partial planning models as well as to efficiently coordinate their distributed, cooperative planning tasks. Therefore, a methodical integration concept as well as a groupware-based cooperation concept was developed. Now it is possible to combine the large number of sophisticated modelling tools, factory simulators as well as GPM tools, and to guarantee a seamless planning process. The conceptual ideas were implemented in a prototypical toolbox to show the technical realization of the flexible concepts for integration and cooperation support. (Back cover).
Download or read book Design Decisions and Co operative Development of Manufacturing Systems written by Pär Mårtensson and published by . This book was released on 2006 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Collaborative Product Design and Manufacturing Methodologies and Applications written by Wei Dong Li and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative Product Design and Manufacturing Methodologies and Applications introduces a wide spectrum of collaborative engineering issues in design and manufacturing. It offers state-of-the-art chapters written by international experts from academia and industry, and reflects the most up-to-date R & D work and applications, especially those from the last three to five years. The book will serve as an essential reference for academics, upper-level undergraduate and graduate students and practicing professionals.
Download or read book Industry 4 0 for SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2020-01-03 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.
Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.
Download or read book Industry 4 0 for SMEs Smart Manufacturing and Logistics for SMEs written by and published by . This book was released on 2020-08-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer. This book was released on 2013-08-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2013, held in Palma de Mallorca, Spain, in September 2013. The 34 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers cover all the topics of cooperative engineering, basic theories, methods and technologies that support CDVE, cooperative design, visualization and applications. There are special contributions dealing with the cooperative issues brought by the Internet of things - such as the situation in the ambient assisted living systems. Other papers in the volume cover a wide range of cooperative application topics such as cooperative e-learning, cooperative decision making and cooperative simulation etc.
Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer. This book was released on 2009-08-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.
Download or read book Handbook of Manufacturing Systems and Design written by Uzair Khaleeq uz Zaman and published by CRC Press. This book was released on 2023-08-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of manufacturing systems, their role in product/process design, and their interconnection with an Industry 4.0 perspective, especially related to design, manufacturing, and operations. Handbook of Manufacturing Systems and Design: An Industry 4.0 Perspective provides the knowledge related to the theories and concepts of Industry 4.0. It focuses on the different types of manufacturing systems in Industry 4.0 along with associated design, and control strategies. It concentrates on the operations in Industry 4.0 with a particular focus on supply chain, logistics, risk management, and reverse engineering perspectives. Offering basic concepts and applications through to advanced topics, the handbook feeds into the goal of being a source of knowledge as well as a vehicle to explore the future possibilities of design, techniques, methods, and operations associated with Industry 4.0. Concepts with practical applications in the form of case studies are added to each chapter to round out the many attributes this handbook offers. This handbook targets students, engineers, managers, designers, and manufacturers, and will assist in their understanding of the core concepts of manufacturing systems in connection with Industry 4.0 and optimize alignment between supply and demand in real time for effective implementation of the design concepts.
Download or read book Computer Supported Cooperative Work in Design II written by Weiming Shen and published by Springer. This book was released on 2006-02-26 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 9th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2005, held in Coventry, UK, in May 2005. The 65 revised full papers presented were carefully reviewed and selected from numerous submissions during at least two rounds of reviewing and improvement.
Download or read book Design and Manufacturing Systems written by National Science Foundation and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cooperative Knowledge Processing for Engineering Design written by Arthur B. Baskin and published by Springer Science & Business Media. This book was released on 1998-12-31 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cooperative working environments and their development are becoming increasingly important and ever more frequent in different industrial sectors and this book provides a scientific approach for managing Team Engineering. Meta-cognitive knowledge and networks are identified as the key resources enabling engineering teams to work effectively and to reduce engineering time and this book illustrates how computer support can aid cooperative work within the context of practical methodologies and examples. The fields covered in the book include: State-of-the-art research in cooperative learning tools; Practical examples and methodologies illustrating the implementation of cooperative networks; and An interdisciplinary approach to team engineering. This valuable new book is sponsored by the International Federation for Information Processing (IFIP) and will be essential reading for researchers, engineers, technical managers involved in the development of advanced applications for engineering and manufacturing, and software design and engineering.
Download or read book Advances in Production Management Systems Competitive Manufacturing for Innovative Products and Services written by Christos Emmanouilidis and published by Springer. This book was released on 2013-08-13 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.
Download or read book Advances in Production Management Systems The Path to Intelligent Collaborative and Sustainable Manufacturing written by Hermann Lödding and published by Springer. This book was released on 2017-08-29 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.
Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-24 with total page 1237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation, sustainability and health, safety and well-being at work. Topics cover manufacturing process analysis and optimization, supply chain management, quality control, as well as human factors and logistics. They highlight the role and advantages of intelligent systems and technologies, discussing current best-practices and challenges to cope with in the near future. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18–22, 2023, in Porto, Portugal, this second volume of a 2-volume set provides academics and professionals with extensive information on innovative strategies for industrial management in the era of industry 5.0.
Download or read book OECD SME and Entrepreneurship Outlook 2005 written by OECD and published by OECD Publishing. This book was released on 2005-07-21 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes recent trends concerning SMEs and entrepreneurship in OECD economies and beyond discussing innovation, regulatory burdens, entrepreneurship education, access to financing, and women's entrepreneurship. Includes a statistical annex.
Download or read book Digital Factory for Human oriented Production Systems written by Luca Canetta and published by Springer Science & Business Media. This book was released on 2011-07-10 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital factory is a comprehensive approach providing methodologies, models and tools that support manufacturing enterprises in the rearrangement of their organizational structures to deal with expected changes in manufacturing processes and markets. Digital Factory for Human-oriented Production Systems investigates the impact of the digital factory through a consideration of the entire product/process lifecycle, and the broad network of product engineering, material and component suppliers, manufacturing equipment suppliers, and customers involved in current and next generation manufacturing. It covers the utilization and integration of: human body ergonomics models; production system discrete event simulation; 3D/virtual and augmented reality visualization; collaborative design tools; automatic data capture; and knowledge management systems based on semantic web ontologies integrated by a continuous data management. The coverage of various types of factory and manufacturing phases, representations and simulations allows researchers in academia and industry to perform a dynamic analysis and up-to-date modeling of the processes involved. Digital Factory for Human-oriented Production Systems describes the tools that allow a move towards the integrated digital factory and underlines the business impact that companies can obtain by adopting these tools. As well as benefiting international organizations, the proposed methodologies and technologies have also been developed in order to facilitate their adoption by small or medium-sized businesses, making them relevant to all product engineers and managers who want improve the efficiency and effectiveness of their enterprises.
