Download or read book Thermal Design of Electronic Equipment written by Ralph Remsburg and published by CRC Press. This book was released on 2017-12-19 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a field where change and growth is inevitable, new electronic packaging problems continually arise. Smaller, more powerful devices are prone to overheating, causing intermittent system failures, corrupted signals, lower MTBF, and outright system failure. Since convection cooling is the heat transfer path most engineers take to deal with thermal problems, it is appropriate to gain as much understanding about the underlying mechanisms of fluid motion as possible. Thermal Design of Electronic Equipment is the only book that specifically targets the formulas used by electronic packaging and thermal engineers. It presents heat transfer equations dealing with polyalphaolephin (PAO), silicone oils, perfluorocarbons, and silicate ester-based liquids. Instead of relying on theoretical expressions and text explanations, the author presents empirical formulas and practical techniques that allow you to quickly solve nearly any thermal engineering problem in electronic packaging.
Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.
Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 1998-02-28 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: With today's high density, high performance electronic systems, packaging and more specifically thermal engineering has become the critical factor that limits on-time product introduction and reliability in the field. This book serves as a reference for engineers who must predict the thermal performance of a company's latest product as well as the technicians who must quickly solve the problem of an overheating chip in a product that is already on the shelves.
Download or read book Cooling and Thermal Design of Electronic Systems written by and published by . This book was released on 1995 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of electronic packaging continues to grow at an amazing rate. To be successful in this field requires analytical skills, a foundation in mechanical engineering, and access to the latest developments in the electronics field. The emphasis for each project that the electronic packaging engineer faces changes from project to project, and from company to company, yet some constants should continue into the foreseeable future. One of these is the emphasis on ther mal design. Although just a few years ago thermal analysis of electronic equipment was an afterthought, it is becoming one of the primary aspects of many packaging jobs. It seems that the days of just adding a bigger fan to reduce the overheat ing problem are almost over. Replacing that thought is the up-front commitment to CFD (Computational Fluid Dynamics) software code, FEA (Finite Element Analysis) software, and the realization that the problem will only get worse. As the electronic circuit size is reduced, speed is increased. As the power of these systems increases and the volume allowed diminishes, heat flux or density (heat per unit area, W/m 2 or Btulh ft2) has spiraled. Much of the improvement in the reliability and packaging density of electronic circuits can be traced to advances in thermal design. While air cooling is still used extensively, advanced heat transfer techniques using exotic synthetic liquids are becoming more prominent, allowing still smaller systems to be manufactured. The appli cation of advanced thermal management techniques requires a background in fluid dynamics.
Download or read book Thermal Management of Electronic Systems written by C.J. Hoogendoorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eurotherm Committee has chosen Thermal Management of Electronic Systems as the subject of its 29th Seminar, at Delft University of Technology, the Netherlands, 14-16 June 1993. This volume constitutes the proceedings of the Seminar. Thermal Management is but one of the several critical topics in the design of electronic systems. However, as a result of the combined effects of increasing heat fluxes, miniaturisation and the striving for zero defects, preferably in less time and at a lower cost than before, thermal management has become an increasingly tough challenge. Therefore, it is being increasingly recognised that cooling requirements could eventually hamper the technical progress in miniaturisation. It might be argued that we are on the verge of a revolution in thermal management techniques. Previously, a packaging engineer had no way of predicting the tempera tures of critical electronic parts with the required accuracy. He or she· had to rely on full-scale experiments, doubtful design rules, or worst-case estimates. This situation is going to be changed in the foreseeable future. User-friendly software tools, the acquisition and integrity of input and output data, the badly needed training mea sures, the introduction into a concurrent engineering environment: all these items will exert a heavy toll on the flexibility of the electronics industries. Fortunately, this situation is being realised at the appropriate management levels, and the interest in this seminar and the pre-conference tutorials testifies to this assertion.
Download or read book Air Cooling Technology for Electronic Equipment written by Sung Jin Kim and published by CRC Press. This book was released on 2020-07-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear your bookcase of references containing bits and pieces of useful information and replace them with this thorough, single-volume guide to thermal analysis. Air Cooling Technology for Electronic Equipment is a helpful, practical resource that answers questions frequently asked by thermal and packaging engineers grappling with today's demand for increased thermal control in electronics. Superbly organized for quick reference, the book dedicates each chapter to answering fundamental questions, such as: What is the optimal spacing between the printed circuit boards? What is a good estimate of the heat transfer coefficient and the associate pressure drop for forced convection over package arrays? How are heat transfer and fluid flow characteristics in the entrance region different from those in the fully developed region? What is the effect of substrate conduction on convection cooling? The chapters, written by engineers and engineering educators who are experts in electronic cooling, are packed with details and present the latest developments in air cooling techniques and thermal design guidelines. They provide problem-solving analyses that are jargon-free, straightforward, and easy to understand. Air Cooling Technology for Electronic Equipment is a handy source of technical information for anyone who wants to get the most out of air cooling.
Download or read book Cooling and Thermal Design of Electronic Systems written by Cristina H. Amon and published by . This book was released on 1995 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Electronic Systems Design written by Jens Lienig and published by Springer. This book was released on 2017-04-25 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design of electronic systems from the ground up, from drawing and CAD essentials to recycling requirements. Chapter by chapter, it deals with the challenges any modern system designer faces: The design process and its fundamentals, such as technical drawings and CAD, electronic system levels, assembly and packaging issues and appliance protection classes, reliability analysis, thermal management and cooling, electromagnetic compatibility (EMC), all the way to recycling requirements and environmental-friendly design principles. "This unique book provides fundamental, complete, and indispensable information regarding the design of electronic systems. This topic has not been addressed as complete and thorough anywhere before. Since the authors are world-renown experts, it is a foundational reference for today’s design professionals, as well as for the next generation of engineering students." Dr. Patrick Groeneveld, Synopsys Inc.
Download or read book Heat Transfer written by Younes Shabany and published by CRC Press. This book was released on 2009-12-17 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuing trend toward miniaturization and high power density electronics results in a growing interdependency between different fields of engineering. In particular, thermal management has become essential to the design and manufacturing of most electronic systems.Heat Transfer: Thermal Management of Electronics details how engineers can use
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Thermal Management of Electronic Systems II written by E. Beyne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the second time, the Eurotherm Committee has chosen Thermal Managment of Electronic Systems as the subject for its 45th Seminar, held at IMEC in Leuven, Belgium, from 20 to 22 September 1995. After the successfui first edition of this seminar in Delft, June 14-16, 1993, it was decided to repeat this event on a two year basis. This volume constitutes the edited proceedings of the Seminar. Thermal management of electronic systems is gaining importance. Whereas a few years ago papers on this subject where mainly devoted to applications in high end markets, such as mainframes and telecommunication switching equipment, we see a growing importance in the "lower" end applications. This may be understood from the growing impact of electronics on every day life, from car electronics, GSM phones, personal computers to electronic games. These applications add new requirements to the thermal design. The thermal problem and the applicable cooling strategies are quite different from those in high end products. In this seminar the latest developments in many of the different aspects of the thermal design of electronic systems were discussed. Particular attention was given to thermal modelling, experimental characterisation and the impact of thermal design on the reliability of electronic systems.
Download or read book Cooling Techniques for Electronic Equipment written by Dave S. Steinberg and published by Wiley-Interscience. This book was released on 1991-10-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details infallible techniques for designing electronic hardware to withstand severe thermal environments. Using both SI and English units throughout, it presents methods for the development of various reliable electronic systems without the need of high-speed computers. It also offers mathematical modeling applications, using analog resistor networks, to provide the breakup of complex systems into numerous individual thermal resistors and nodes for those who prefer high-speed digital computer solutions to thermal problems.
Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.
Download or read book Cooling of Electronic Equipment written by Allan W. Scott and published by Wiley-Interscience. This book was released on 1974 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by Younes Shabany and published by . This book was released on 2010 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Thermal Modeling of Electronic Components and Systems written by Allan D. Kraus and published by . This book was released on 1993-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume opens with a sweeping overview of the physical design of electronic systems-methodology, technology, and future challenges-thermally induced failures in electronic systems. Subsequent chapters examine the causes for thermally induced failures of electronic components and the techniques used to analyze and prevent such failures. It gives a comprehensive bibliograhy of project managers and lead engineers, packaging engineers and mechanical analysts, consultants, and academic, industrial, and government laboratory researchers.
