Download or read book Control Surface Deflection Effects on the Innovative Control Effectors ICE 101 Design written by Gregory A. Addington and published by . This book was released on 2000 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: A static wind tunnel test of the Innovative Controls Effectors (ICE 101) conceptual aircraft configuration was conducted in the Air Force Research Laboratory's Vertical Wind Tunnel. This entry characterized the increments to the aerodynamic loading provided by the various control surfaces while using a more finely-resolved test matrix in angle of attack and sideslip than typically seen in wind tunnel testing. The purpose for obtaining these data was to determine the effect which control surface deflection had on critical state locations in preparation for the test of a second ICE model built with remotely- actuated control surfaces. (Critical states are discrete flight mechanical states where the aerodynamic response looses its analytic dependence on one or more state variables.) These data demonstrate that the aerodynamic increments are in many cases at minimum nonlinear functions of the surface deflection angle, and strongly suggest that some critical states do shift in angle of attack and/or sideslip with changing deflection angle.
Download or read book Innovations in Defence Support Systems 1 written by Anthony Finn and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in the area of Defence Support Systems are multi-disciplinary, cover a broad range of technologies, and could not possibly be covered within a single volume. This research book presents a sample of research as below: • On the Transition of Innovation and Technology in Defence • Inserting Innovations In-service • Classification of Battlefield Ground Vehicles based on the Acoustic Emissions • Convoy Movement Problem – An Optimization Perspective • Machine Vision Algorithms for Autonomous Aerial Refueling for UAVs using the USAF Refueling Boom Method • Motion Optimization Scheme for Cooperative Mobile Robots • An Automated Decision System for Landmine Detection and Classification The book is directed to the application engineers, research students, professors, decision makers and scientists & engineers working in defence and related areas.
Download or read book Proceedings of the 6th China Aeronautical Science and Technology Conference written by Chinese Aeronautical Society and published by Springer Nature. This book was released on 2024-01-03 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the original peer-reviewed research papers presented at the 6th China Aeronautical Science and Technology Conference held in Wuzhen, Zhejiang Province, China, in September 2023. Topics covered include but are not limited to Navigation/Guidance and Control Technology, Aircraft Design and Overall Optimisation of Key Technologies, Aviation Testing Technology, Airborne Systems/Electromechanical Technology, Structural Design, Aerodynamics and Flight Mechanics, Advanced Aviation Materials and Manufacturing Technology, Advanced Aviation Propulsion Technology, and Civil Aviation Transportation. The papers presented here share the latest findings in aviation science and technology, making the book a valuable resource for researchers, engineers and students in related fields.
Download or read book Aircraft Control Allocation written by Wayne Durham and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Control Allocation Wayne Durham, Virginia Polytechnic Institute and State University, USA Kenneth A. Bordignon, Embry-Riddle Aeronautical University, USA Roger Beck, Dynamic Concepts, Inc., USA An authoritative work on aircraft control allocation by its pioneers Aircraft Control Allocation addresses the problem of allocating supposed redundant flight controls. It provides introductory material on flight dynamics and control to provide the context, and then describes in detail the geometry of the problem. The book includes a large section on solution methods, including 'Banks' method', a previously unpublished procedure. Generalized inverses are also discussed at length. There is an introductory section on linear programming solutions, as well as an extensive and comprehensive appendix dedicated to linear programming formulations and solutions. Discrete-time, or frame-wise allocation, is presented, including rate-limiting, nonlinear data, and preferred solutions. Key features: Written by pioneers in the field of control allocation. Comprehensive explanation and discussion of the major control allocation solution methods. Extensive treatment of linear programming solutions to control allocation. A companion web site contains the code of a MATLAB/Simulink flight simulation with modules that incorporate all of the major solution methods. Includes examples based on actual aircraft. The book is a vital reference for researchers and practitioners working in aircraft control, as well as graduate students in aerospace engineering.
Download or read book Innovation in Flight written by Joseph R. Chambers and published by . This book was released on 2005 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book Flying beyond the stall written by Douglas A. Joyce and published by . This book was released on 2014 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The X-31 Enhanced Fighter Maneuverability Demonstrator was unique among experimental aircraft. A joint effort of the United States and Germany, the X-31 was the only X-plane to be designed, manufactured, and flight tested as an international collaboration. It was also the only X-plane to support two separate test programs conducted years apart, one administered largely by NASA and the other by the U.S. Navy, as well as the first X-plane ever to perform at the Paris Air Show. Flying Beyond the Stall begins by describing the government agencies and private-sector industries involved in the X-31 program, the genesis of the supermaneuverability concept and its initial design breakthroughs, design and fabrication of two test airframes, preparation for the X-31's first flight, and the first flights of Ship #1 and Ship #2. Subsequent chapters discuss envelope expansion, handling qualities (especially at high angles of attack), and flight with vectored thrust. The book then turns to the program's move to NASA's Dryden Flight Research Center and actual flight test data. Additional tasking, such as helmet-mounted display evaluations, handling quality studies, aerodynamic parameter estimation, and a "tailless" study are also discussed.The book describes how, in the aftermath of a disastrous accident with Ship #1 in 1995, Ship #2 was prepared for its outstanding participation in the Paris Air Show. The aircraft was then shipped back to Edwards AFB and put into storage until the late 1990s, when it was refurbished for participation in the U. S. Navy's VECTOR program. The book ends with a comprehensive discussion of lessons learned and includes an Appendix containing detailed information.
Download or read book Beyond Tube and Wing written by Bruce Larrimer and published by . This book was released on 2020-06-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Launch Vehicle Design Process Characterization Technical Integration and Lessons Learned written by J. C. Blair and published by . This book was released on 2001 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Intelligent Aircraft Structures SARISTU written by Piet Christof Wölcken and published by Springer. This book was released on 2015-09-04 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.
Download or read book Proceedings of the AIAA Modeling and Simulation Technologies Conference written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics for the 1997 conference on modelling and simulation technologies included: motion systems; rotor-craft and air cushion vehicle dynamics and modelling; pilot training and low-cost simulation; weapons and engagement modelling and simulation; simulator network and information technologies; visual, radarf and environmental modelling and simulation; test and evaluation; space systems; simulator fidelity; aircraft dynamics, modelling and performance; simulator development and software re-use; human factors; and research and test facilities.
Download or read book Dynamics of Atmospheric Flight written by Bernard Etkin and published by Courier Corporation. This book was released on 2012-08-29 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This treatment for upper-level undergraduates, graduate students, and professionals makes special reference to stability and control of airplanes, with extensive numerical examples covering a variety of vehicles. 260 illustrations. 1972 edition.
Download or read book Rhythms of the Brain written by G. Buzsáki and published by Oxford University Press. This book was released on 2011 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of mechanisms in the brain that allow complicated things to happen in a coordinated fashion have produced some of the most spectacular discoveries in neuroscience. This book provides eloquent support for the idea that spontaneous neuron activity, far from being mere noise, is actually the source of our cognitive abilities. It takes a fresh look at the coevolution of structure and function in the mammalian brain, illustrating how self-emerged oscillatory timing is the brain's fundamental organizer of neuronal information. The small-world-like connectivity of the cerebral cortex allows for global computation on multiple spatial and temporal scales. The perpetual interactions among the multiple network oscillators keep cortical systems in a highly sensitive "metastable" state and provide energy-efficient synchronizing mechanisms via weak links. In a sequence of "cycles," György Buzsáki guides the reader from the physics of oscillations through neuronal assembly organization to complex cognitive processing and memory storage. His clear, fluid writing-accessible to any reader with some scientific knowledge-is supplemented by extensive footnotes and references that make it just as gratifying and instructive a read for the specialist. The coherent view of a single author who has been at the forefront of research in this exciting field, this volume is essential reading for anyone interested in our rapidly evolving understanding of the brain.
Download or read book Aircraft Flight Dynamics and Control written by Wayne Durham and published by John Wiley & Sons. This book was released on 2013-07-18 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Flight Dynamics and Control addresses airplane flight dynamics and control in a largely classical manner, but with references to modern treatment throughout. Classical feedback control methods are illustrated with relevant examples, and current trends in control are presented by introductions to dynamic inversion and control allocation. This book covers the physical and mathematical fundamentals of aircraft flight dynamics as well as more advanced theory enabling a better insight into nonlinear dynamics. This leads to a useful introduction to automatic flight control and stability augmentation systems with discussion of the theory behind their design, and the limitations of the systems. The author provides a rigorous development of theory and derivations and illustrates the equations of motion in both scalar and matrix notation. Key features: Classical development and modern treatment of flight dynamics and control Detailed and rigorous exposition and examples, with illustrations Presentation of important trends in modern flight control systems Accessible introduction to control allocation based on the author's seminal work in the field Development of sensitivity analysis to determine the influential states in an airplane's response modes End of chapter problems with solutions available on an accompanying website Written by an author with experience as an engineering test pilot as well as a university professor, Aircraft Flight Dynamics and Control provides the reader with a systematic development of the insights and tools necessary for further work in related fields of flight dynamics and control. It is an ideal course textbook and is also a valuable reference for many of the necessary basic formulations of the math and science underlying flight dynamics and control.
Download or read book Space Vehicle Design written by Michael Douglas Griffin and published by AIAA. This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Knowledge based Guidance and Control Functions written by and published by . This book was released on 1995 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
