Download or read book Control of Integral Processes with Dead Time written by Antonio Visioli and published by Springer Science & Business Media. This book was released on 2010-11-18 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Integral Processes with Dead Time provides a unified and coherent review of the various approaches devised for the control of integral processes, addressing the problem from different standpoints. In particular, the book treats the following topics: How to tune a PID controller and assess its performance; How to design a two-degree-of-freedom control scheme in order to deal with both the set-point following and load disturbance rejection tasks; How to modify the basic Smith predictor control scheme in order to cope with the presence of an integrator in the process; and how to address the presence of large process dead times. The methods are presented sequentially, highlighting the evolution of their rationale and implementation and thus clearly characterising them from both academic and industrial perspectives.
Download or read book Control of Dead time Processes written by Julio E. Normey-Rico and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the fundamental techniques for controlling dead-time processes from simple monovariable to complex multivariable cases. Dead-time-process-control problems are studied using classical proportional-integral-differential (PID) control for the simpler examples and dead-time-compensator (DTC) and model predictive control (MPC) methods for progressively more complex ones. Downloadable MATLAB® code makes the examples and ideas more convenient and simpler.
Download or read book Control of Dead time Processes written by Julio E. Normey-Rico and published by Springer Science & Business Media. This book was released on 2007-06-07 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the fundamental techniques for controlling dead-time processes from simple monovariable to complex multivariable cases. Dead-time-process-control problems are studied using classical proportional-integral-differential (PID) control for the simpler examples and dead-time-compensator (DTC) and model predictive control (MPC) methods for progressively more complex ones. Downloadable MATLAB® code makes the examples and ideas more convenient and simpler.
Download or read book Control of Integral Processes with Dead Time written by and published by . This book was released on 2011-07-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification of Continuous Systems written by Heinz Unbehauen and published by . This book was released on 1987 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together important advances in the field of continuous system identification, this book deals with both parametric and nonparametric methods. It pays special attention to the problem of retaining continuous model parameters in the estimation equations, to which all the existing techniques used in estimating discrete models may be applied. It is aimed at both the academic researcher and the control engineer in industry. The techniques covered range from certain simple numerical or graphical methods applicable to some of the frequently encountered model forms, to attractive recursive algorithms for continuous model identification suitable for real time implementation. These include the recent methods based on orthogonal functions such as those of Walsh and Poisson moment functionals. Some techniques based on stable model adaptation principles are also presented and illustrated.
Download or read book Handbook of PI and PID Controller Tuning Rules written by Aidan O'Dwyer and published by Imperial College Press. This book was released on 2006 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of automatic controllers used to compensate industrial processes are of PI or PID type. This book comprehensively compiles, using a unified notation, tuning rules for these controllers proposed over the last seven decades (1935OCo2005). The tuning rules are carefully categorized and application information about each rule is given. The book discusses controller architecture and process modeling issues, as well as the performance and robustness of loops compensated with PI or PID controllers. This unique publication brings together in an easy-to-use format material previously published in a large number of papers and books. This wholly revised second edition extends the presentation of PI and PID controller tuning rules, for single variable processes with time delays, to include additional rules compiled since the first edition was published in 2003. Sample Chapter(s). Chapter 1: Introduction (17 KB). Contents: Controller Architecture; Tuning Rules for PI Controllers; Tuning Rules for PID Controllers; Performance and Robustness Issues in the Compensation of FOLPD Processes with PI and PID Controllers. Readership: Control engineering researchers in academia and industry with an interest in PID control and control engineering practitioners using PID controllers. The book also serves as a reference for postgraduate and undergraduate students."
Download or read book PID Controllers written by Karl Johan Åström and published by Isa. This book was released on 1995-01 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PID Control for Industrial Processes written by Mohammad Shamsuzzoha and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: PID Control for Industrial Processes presents a clear, multidimensional representation of proportional - integral - derivative (PID) control for both students and specialists working in the area of PID control. It mainly focuses on the theory and application of PID control in industrial processes. It incorporates recent developments in PID control technology in industrial practice. Emphasis has been given to finding the best possible approach to develop a simple and optimal solution for industrial users. This book includes several chapters that cover a broad range of topics and priority has been given to subjects that cover real-world examples and case studies. The book is focused on approaches for controller tuning, i.e., method bases on open-loop plant tests and closed-loop experiments.
Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
Download or read book Practical Process Control for Engineers and Technicians written by Wolfgang Altmann and published by Elsevier. This book was released on 2005-05-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at engineers and technicians who need to have a clear, practical understanding of the essentials of process control, loop tuning and how to optimize the operation of their particular plant or process. The reader would typically be involved in the design, implementation and upgrading of industrial control systems. Mathematical theory has been kept to a minimum with the emphasis throughout on practical applications and useful information.This book will enable the reader to:* Specify and design the loop requirements for a plant using PID control* Identify and apply the essential building blocks in automatic control* Apply the procedures for open and closed loop tuning* Tune control loops with significant dead-times* Demonstrate a clear understanding of analog process control and how to tune analog loops* Explain concepts used by major manufacturers who use the most up-to-date technology in the process control field·A practical focus on the optimization of process and plant·Readers develop professional competencies, not just theoretical knowledge·Reduce dead-time with loop tuning techniques
Download or read book Process Control for Practitioners written by Jacques F. Smuts and published by . This book was released on 2011-09-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Dead time Processes written by Julio E. Normey-Rico and published by Springer. This book was released on 2009-10-12 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the fundamental techniques for controlling dead-time processes from simple monovariable to complex multivariable cases. Dead-time-process-control problems are studied using classical proportional-integral-differential (PID) control for the simpler examples and dead-time-compensator (DTC) and model predictive control (MPC) methods for progressively more complex ones. Downloadable MATLAB® code makes the examples and ideas more convenient and simpler.
Download or read book PID Control in the Third Millennium written by Ramon Vilanova and published by Springer Science & Business Media. This book was released on 2012-02-03 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early 21st century has seen a renewed interest in research in the widely-adopted proportional-integral-differential (PID) form of control. PID Control in the Third Millennium provides an overview of the advances made as a result. Featuring: new approaches for controller tuning; control structures and configurations for more efficient control; practical issues in PID implementation; and non-standard approaches to PID including fractional-order, event-based, nonlinear, data-driven and predictive control; the nearly twenty chapters provide a state-of-the-art resumé of PID controller theory, design and realization. Each chapter has specialist authorship and ideas clearly characterized from both academic and industrial viewpoints. PID Control in the Third Millennium is of interest to academics requiring a reference for the current state of PID-related research and a stimulus for further inquiry. Industrial practitioners and manufacturers of control systems with application problems relating to PID will find this to be a practical source of appropriate and advanced solutions.
Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use
Download or read book Process Control written by Béla G. Lipták and published by Butterworth-Heinemann. This book was released on 2013-10-02 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook, Third Edition: Process Control provides information pertinent to control hardware, including transmitters, controllers, control valves, displays, and computer systems. This book presents the control theory and shows how the unit processes of distillation and chemical reaction should be controlled. Organized into eight chapters, this edition begins with an overview of the method needed for the state-of-the-art practice of process control. This text then examines the relative merits of digital and analog displays and computers. Other chapters consider the basic industrial annunciators and other alarm systems, which consist of multiple individual alarm points that are connected to a trouble contact, a logic module, and a visual indicator. This book discusses as well the data loggers available for process control applications. The final chapter deals with the various pump control systems, the features and designs of variable-speed drives, and the metering pumps. This book is a valuable resource for engineers.
Download or read book Instrumentation for Process Measurement and Control Third Editon written by Norman A. Anderson and published by CRC Press. This book was released on 1997-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perennially bestselling third edition of Norman A. Anderson's Instrumentation for Process Measurement and Control provides an outstanding and practical reference for both students and practitioners. It introduces the fields of process measurement and feedback control and bridges the gap between basic technology and more sophisticated systems. Keeping mathematics to a minimum, the material meets the needs of the instrumentation engineer or technician who must learn how equipment operates. I t covers pneumatic and electronic control systems, actuators and valves, control loop adjustment, combination control systems, and process computers and simulation
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1996 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt:
