Download or read book Control Aspects of Complex Hydromechanical Transmissions written by L. Viktor Larsson and published by Linköping University Electronic Press. This book was released on 2017-08-17 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with control aspects of complex hydromechanical transmissions. The overall purpose is to increase the knowledge of important aspects to consider during the development of hydromechanical transmissions to ensure transmission functionality. These include ways of evaluating control strategies in early design stages as well as dynamic properties and control aspects of displacement controllers, which are key components in these systems. Fuel prices and environmental concerns are factors that drive research on propulsion in heavy construction machinery. Hydromechanical transmissions are strong competitors to conventional torque-converter transmissions used in this application today. They offer high efficiency and wide speed/torque conversion ranges, and may easily be converted to hybrids that allow further fuel savings through energy recuperation. One challenge with hydromechanical transmissions is that they offer many different configurations, which in turn makes it important to enable evaluation of control aspects in early design stages. In this thesis, hardware-in-the-loop simulations, which blend hardware tests and standard software-based simulations, are considered to be a suitable method. A multiple-mode transmission applied to a mid-sized construction machine is modelled and evaluated in offline simulations as well as in hardware-in-the-loopsimulations. Hydromechanical transmissions rely on efficient variable pumps/motors with fast, accurate displacement controllers. This thesis studies the dynamic behaviour of the displacement controller in swash-plate axial-piston pumps/motors. A novel control approach in which the displacement is measured with an external sensor is proposed. Performance and limitations of the approach are tested in simulations and in experiments. The experiments showed a significantly improved performance with a controller that is slightly more advanced than a standard proportional controller. The implementation of the controller allows simple tuning and good predictability of the displacement response.
Download or read book Advanced Hybrid Powertrains for Commercial Vehicles written by Haoran Hu and published by SAE International. This book was released on 2021-04-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrains for commercial vehicles have evolved since the late nineteenth-century invention of the ICE. In the revised second edition of Advanced Hybrid Powertrains for Commercial Vehicles, the authors explore commercial powertrains through history from the ICE through the introduction of the hybrid powertrain in commercial vehicles. Readers are given an understanding of the ICE as well as the classification of commercial vehicle hybrid powertrains, the variety of energy storage systems, fuel-cell hybrid powertrain systems, and commercial vehicle electrification. The authors review the legislation of vehicle emissions and the regulation necessary to promote the production of fuel-efficient vehicles.
Download or read book Design and Control of Automotive Propulsion Systems written by Zongxuan Sun and published by CRC Press. This book was released on 2014-12-20 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Better Understand the Relationship between Powertrain System Design and Its Control IntegrationWhile powertrain system design and its control integration are traditionally divided into two different functional groups, a growing trend introduces the integration of more electronics (sensors, actuators, and controls) into the powertrain system.
Download or read book Hydrostatic Transmissions and Actuators written by Gustavo Costa and published by John Wiley & Sons. This book was released on 2015-09-28 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrostatic Transmissions and Actuators takes a pedagogical approach and begins with an overview of the subject, providing basic definitions and introducing fundamental concepts. Hydrostatic transmissions and hydrostatic actuators are then examined in more detail with coverage of pumps and motors, hydrostatic solutions to single-rod actuators, energy management and efficiency and dynamic response. Consideration is also given to current and emerging applications of hydrostatic transmissions and actuators in automobiles, mobile equipment, wind turbines, wave energy harvesting and airplanes. End of chapter exercises and real world industrial examples are included throughout and a companion website hosting a solution manual is also available. Hydrostatic Transmissions and Actuators is an up to date and comprehensive textbook suitable for courses on fluid power systems and technology, and mechatronics systems design.
Download or read book Hydraulic Control Systems written by Noah Manring and published by John Wiley & Sons. This book was released on 2005-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique resource that demystifies the physical basics of hydraulic systems Hydraulic Control Systems offers students and professionals a reliable, complete volume of the most up-to-date hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. Hydraulic Control Systems is a powerful tool for developing a solid understanding of hydraulic control systems that will serve the practicing engineer in the field. Throughout the book, illustrative case studies highlight important topics and demonstrate how equations can be implemented and used in the real world. Featuring exercise problems at the end of every chapter, Hydraulic Control Systems presents: A useful review of fluid mechanics and system dynamics Thorough analysis of transient fluid flow forces within valves Discussions of flow ripple for both gear pumps and axial piston pumps Updated analysis of the pump control problems associated with swash plate type machines A successful methodology for hydraulic system design—starting from the load point of the system and working backward to the ultimate power source Reduced-order models and PID controllers showing control objectives of position, velocity, and effort
Download or read book Servo Hydraulic Control of a Continuously Variable Transmission written by Brian Douglas Moran and published by . This book was released on 2000 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Automotive Transmission Book written by Robert Fischer and published by Springer. This book was released on 2015-05-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.
Download or read book Electric Systems for Transportation written by Maria Carmen Falvo and published by MDPI. This book was released on 2021-09-02 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation systems play a major role in the reduction of energy consumptions and environmental impact all over the world. The significant amount of energy of transport systems forces the adoption of new solutions to ensure their performance with energy-saving and reduced environmental impact. In this context, technologies and materials, devices and systems, design methods, and management techniques, related to the electrical power systems for transportation are continuously improving thanks to research activities. The main common challenge in all the applications concerns the adoption of innovative solutions that can improve existing transportation systems in terms of efficiency and sustainability.
Download or read book Hydraulic Fluid Power written by Andrea Vacca and published by John Wiley & Sons. This book was released on 2021-04-28 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYDRAULIC FLUID POWER LEARN MORE ABOUT HYDRAULIC TECHNOLOGY IN HYDRAULIC SYSTEMS DESIGN WITH THIS COMPREHENSIVE RESOURCE Hydraulic Fluid Power provides readers with an original approach to hydraulic technology education that focuses on the design of complete hydraulic systems. Accomplished authors and researchers Andrea Vacca and Germano Franzoni begin by describing the foundational principles of hydraulics and the basic physical components of hydraulics systems. They go on to walk readers through the most practical and useful system concepts for controlling hydraulic functions in modern, state-of-the-art systems. Written in an approachable and accessible style, the book’s concepts are classified, analyzed, presented, and compared on a system level. The book also provides readers with the basic and advanced tools required to understand how hydraulic circuit design affects the operation of the equipment in which it’s found, focusing on the energy performance and control features of each design architecture. Readers will also learn how to choose the best design solution for any application. Readers of Hydraulic Fluid Power will benefit from: Approaching hydraulic fluid power concepts from an “outside-in” perspective, emphasizing a problem-solving orientation Abundant numerical examples and end-of-chapter problems designed to aid the reader in learning and retaining the material A balance between academic and practical content derived from the authors’ experience in both academia and industry Strong coverage of the fundamentals of hydraulic systems, including the equations and properties of hydraulic fluids Hydraulic Fluid Power is perfect for undergraduate and graduate students of mechanical, agricultural, and aerospace engineering, as well as engineers designing hydraulic components, mobile machineries, or industrial systems.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book TRANSBALTICA XIII Transportation Science and Technology written by Olegas Prentkovskis and published by Springer Nature. This book was released on 2023-02-21 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative research and developments in the broad field of transportation. It covers solutions relating to intelligent vehicles and infrastructure, energy and combustion management, vehicle dynamics and engineering, as well as research on railway transport, aerospace technologies, logistics and security. Contributions are based on peer-reviewed papers presented at the 13th international scientific conference "Transbaltica: Transportation Science and Technology", held on September 15-16, 2022, at Vilnius Gediminas Technical University, in Vilnius, Lithuania. All in all, this book offers extensive information on modern transport systems, with a good balance of theory and practice.
Download or read book Proceedings of the FISITA 2012 World Automotive Congress written by SAE-China and published by Springer Science & Business Media. This book was released on 2012-10-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 10: Chassis Systems and Integration Technology focuses on: •Chassis structure and Design •Chassis Controls and Integration •Tire and wheel Design/ Tire Properties and Modeling •Subjective and Objective Evaluation on Dynamic Performance •Dynamics Modeling, Simulation and Experimental Validation Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book. SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design and education in the fields of automotive and related industries. FISITA is the umbrella organization for the national automotive societies in 37 countries around the world. It was founded in Paris in 1948 with the purpose of bringing engineers from around the world together in a spirit of cooperation to share ideas and advance the technological development of the automobile.
Download or read book Report written by and published by . This book was released on 1968 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Fluid Power Systems with Simcenter Amesim written by Nicolae Vasiliu and published by CRC Press. This book was released on 2018-04-09 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates numerical simulation of fluid power systems by LMS Amesim Platform covering hydrostatic transmissions, electro hydraulic servo valves, hydraulic servomechanisms for aerospace engineering, speed governors for power machines, fuel injection systems, and automotive servo systems It includes hydrostatic transmissions, automotive fuel injection, hydropower speed units governor, aerospace servo systems along with case studies of specified companies Aids in predicting and optimizing the static and dynamic performances related to the systems under study
Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.
Download or read book Highway Safety Literature written by and published by . This book was released on 1979 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
