Download or read book Control Applications of Nonlinear Programming and Optimization 1989 written by H.B. Siguerdidjane and published by Elsevier. This book was released on 2014-07-04 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings provide valuable information on the exchange of ideas between scientists who apply nonlinear programming and optimization to real world control problems and those who develop new methods, algorithms and software. The papers deal with windshear problems, optimization of aircraft and spacecraft trajectories, optimal control for robots, the optimization of urban traffic control, general mechanical systems, multilevel inventory systems and robust control.

Download or read book Nonlinear Control Systems Design 1989 written by A. Isidori and published by Elsevier. This book was released on 2014-05-23 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, the development of specific methodologies for the control of systems described by nonlinear mathematical models has attracted an ever increasing interest. New breakthroughs have occurred which have aided the design of nonlinear control systems. However there are still limitations which must be understood, some of which were addressed at the IFAC Symposium in Capri. The emphasis was on the methodological developments, although a number of the papers were concerned with the presentation of applications of nonlinear design philosophies to actual control problems in chemical, electrical and mechanical engineering.

Download or read book Power Systems and Power Plant Control 1989 written by U. Ahn and published by Elsevier. This book was released on 2014-06-05 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of power systems and power plants is a subject of growing interest which continues to sustain a high level of research, development and application in many diverse yet complementary areas, such as maintaining a high quality but economical service and coping with environmental constraints. The papers included within this volume provide the most up to date developments in this field of research.

Download or read book Information Control Problems in Manufacturing Technology 1989 written by E.A. Puente and published by Elsevier. This book was released on 2014-06-28 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.

Download or read book Control of Distributed Parameter Systems 1989 written by M. Amouroux and published by Elsevier. This book was released on 2014-06-28 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.

Download or read book Distributed Computer Control Systems 1989 written by L. Motus and published by Elsevier. This book was released on 2014-07-04 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the workshop was on recent advances in the theory, applications and techniques for distributed computer control systems. Topics included: tools and methods for inner layers of DCCS; application papers presenting operational DCCS; the infiltration of true real-time or "time critical" concepts and the emergence of artificial intelligence methods in DCCS applications, leading to novel computer architectures being integrated in computer networks. The book will be of interest not only to those involved in DCCS but also software engineers and distributed computing scientists.

Download or read book Convexification and Global Optimization in Continuous and Mixed Integer Nonlinear Programming written by Mohit Tawarmalani and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in constrained optimization originated with the simple linear pro gramming model since it was practical and perhaps the only computationally tractable model at the time. Constrained linear optimization models were soon adopted in numerous application areas and are perhaps the most widely used mathematical models in operations research and management science at the time of this writing. Modelers have, however, found the assumption of linearity to be overly restrictive in expressing the real-world phenomena and problems in economics, finance, business, communication, engineering design, computational biology, and other areas that frequently demand the use of nonlinear expressions and discrete variables in optimization models. Both of these extensions of the linear programming model are NP-hard, thus representing very challenging problems. On the brighter side, recent advances in algorithmic and computing technology make it possible to re visit these problems with the hope of solving practically relevant problems in reasonable amounts of computational time. Initial attempts at solving nonlinear programs concentrated on the de velopment of local optimization methods guaranteeing globality under the assumption of convexity. On the other hand, the integer programming liter ature has concentrated on the development of methods that ensure global optima. The aim of this book is to marry the advancements in solving nonlinear and integer programming models and to develop new results in the more general framework of mixed-integer nonlinear programs (MINLPs) with the goal of devising practically efficient global optimization algorithms for MINLPs.

Download or read book Advanced Information Processing in Automatic Control AIPAC 89 written by R. Husson and published by Elsevier. This book was released on 2014-05-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.

Download or read book Information Control Problems in Manufacturing Technology 1992 written by M.B. Zaremba and published by Elsevier. This book was released on 2016-02-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain more than 80 of the best papers presented at the INCOM '92 Symposium, and relate to the vast changes which are occurring worldwide in manufacturing technology. Research oriented technical papers cover subjects such as: simulation of manufacturing processes; sensor based robots; information systems; general aspects of CIM and manufacturing networks.

Download or read book Production Control in the Process Industry written by E. O'shima and published by Elsevier. This book was released on 2014-07-04 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers within this volume reflect the multidisciplinary approach taken by the workshop to the development and improvement of existing production control theories and practices as applied to the process industry. Subjects covered include production planning, quality control and assurance, operational control and maintenance strategy. The development of this area is seen by those at the workshop as only being achieved by various groups working together rather than in isolation, so that the overall aim of production control is not lost in too much detail. This volume will provide the reader with essential information on new initiatives in the process industry with regard to production control.

Download or read book International Conflict Resolution Using System Engineering SWIIS written by H. Chestnut and published by Elsevier. This book was released on 2014-07-04 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding an alternative to supplement military ways of resolving international conflicts has been taken up by many people skilled in various areas such as political science, economics, social studies, modelling and simulation, artificial intelligence and expert systems, military strategy and weaponry as well as private business and industry. The Workshop will therefore be of use as it looks at various control methods which would create a conciliatory social and political environment or climate for seeking and obtaining non-military solutions to international conflicts and to solutions to national conflicts which may lead to international conflicts.

Download or read book Automatic Control 1990 written by Ü Jaaksoo and published by Elsevier. This book was released on 2014-05-23 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.

Download or read book Advanced and Optimization Based Sliding Mode Control Theory and Applications written by Antonella Ferrara and published by SIAM. This book was released on 2019-07-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compendium of the authors’ recently published results, this book discusses sliding mode control of uncertain nonlinear systems, with a particular emphasis on advanced and optimization based algorithms. The authors survey classical sliding mode control theory and introduce four new methods of advanced sliding mode control. They analyze classical theory and advanced algorithms, with numerical results complementing the theoretical treatment. Case studies examine applications of the algorithms to complex robotics and power grid problems. Advanced and Optimization Based Sliding Mode Control: Theory and Applications is the first book to systematize the theory of optimization based higher order sliding mode control and illustrate advanced algorithms and their applications to real problems. It presents systematic treatment of event-triggered and model based event-triggered sliding mode control schemes, including schemes in combination with model predictive control, and presents adaptive algorithms as well as algorithms capable of dealing with state and input constraints. Additionally, the book includes simulations and experimental results obtained by applying the presented control strategies to real complex systems. This book is suitable for students and researchers interested in control theory. It will also be attractive to practitioners interested in implementing the illustrated strategies. It is accessible to anyone with a basic knowledge of control engineering, process physics, and applied mathematics.

Download or read book Automatic Control in Aerospace 1989 written by T. Nishimura and published by Elsevier. This book was released on 2014-05-23 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented at the Symposium covered the areas in aerospace technology where automatic control plays a vital role. These included navigation and guidance, space robotics, flight management systems and satellite orbital control systems. The information provided reflects the recent developments and technical advances in the application of automatic control in space technology.

Download or read book Improvements to a Hybrid Algorithm for Rapid Generation of 3 D Optimal Launch Vehicle Ascent Trajectories written by Peter F. Gath and published by diplom.de. This book was released on 1999-12-15 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: This thesis presents improvements to FLOAT, a hybrid analytical/numerical algorithm for rapid generation of three dimensional, optimal launch vehicle ascent trajectories. Improvements have been made to the terminal constraints, which are now available in a more general form to allow for an optimal attachment point to the target orbit.The existing algorithm also has been extended with logic that allows for vehicles with low thrust to weight ratios in the upper stage and successful convergence of problems with path constraints for normal force and angle of attack Another major extension made to the code is the introduction of coasting arcs. Coasting arcs are implemented using a completely analytical solution for the prediction of states and costates as well as for the required sensitivity matrix. This allows for a very fast and accurate calculation even with long coasting arcs. Finally, an approach for the optimization of start and end time of coast arcs is presented.This approach was implemented and the results of a test case compare very well with results generated with OTIS for the same case. At the end, suggestions for future development are made. Inhaltsverzeichnis:Table of Contents: Summaryi Acknowledgementsii Contentsiii Nomenclaturev Figuresviii Introduction1 1.Problem description3 1.1Describing the final orbit3 1.2Coordinate frame5 1.3Dynamic system6 1.4Initial conditions7 1.5Path constraints7 1.6Performance index7 1.7Terminal constraints8 1.8Solution method8 1.9Non-dimensionalization of the variables9 2.Solving the two-point boundary value problem10 2.1Vacuumsolution10 2.1.1Simplified model equations10 2.1.2Optimal control for vacuum solution11 2.1.3Thrust integrals and closed form solution for ascent in vacuum12 2.2Atmospheric solution13 2.2.1Dynamic system and collocation variables13 2.2.2Optimality condition to solve for 1b14 2.2.3Differential equations for the costate variables16 2.3Terminal constraints16 2.3.1Attaching at perigee17 2.3.2Free attachment point17 2.4Transversality conditions18 2.4.1Final costates for attaching at perigee18 2.4.2Final costates for free attachment point19 2.4.3Equatorial orbits22 2.5Adjusting final time22 2.6Computation procedure23 2.7Numerical results24 3.Low thrust upper stages27 3.1Typical low thrust case27 3.2Problems with low thrust upper stages28 3.3Upper stage modification30 3.4Advantage of free attachment point for low thrust [...]

Download or read book Dynamic Modelling and Control of National Economies 1989 written by N.M. Christodoulakis and published by Elsevier. This book was released on 2014-06-28 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium aimed at analysing and solving the various problems of representation and analysis of decision making in economic systems starting from the level of the individual firm and ending up with the complexities of international policy coordination. The papers are grouped into subject areas such as game theory, control methods, international policy coordination and the applications of artificial intelligence and experts systems as a framework in economic modelling and control. The Symposium therefore provides a wide range of important information for those involved or interested in the planning of company and national economics.

Download or read book DGOR written by Wolfgang Bühler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the results of the joint annual conference of the four Operations Research Societies DGOR, GM\OR, \GOR and SVOR, held in Vienna in 1990. The main goal was to present practical experiences as well as theoretical results. Both aspects are covered in a balanced way. Papers cover topics from the fields Optimization, Stochastic Modells, Decision Theory and Multicriteria Decision Making, Control Theory, Mathematical Economics, Game Theory, Macroeconomics, Econometrics and Statistics, Supercomputing and Simulation, Non-linear Systems, Artificial Intelligence and Expert Systems, Fuzzy Sets and Systems, Production, Logistics, Inventory and Marketing among others.