Download or read book Control and Operation of Grid Connected Wind Energy Systems written by Ali M. Eltamaly and published by Springer Nature. This book was released on 2021-03-04 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book analyses and discusses the current issues of integration of wind energy systems in the power systems. It collects recent studies in the area, focusing on numerous issues including unbalanced grid voltages, low-voltage ride-through and voltage stability of the grid. It also explores the impact of the emerging technologies of wind turbines and power converters in the integration of wind power systems in power systems. This book utilizes the editors’ expertise in the energy sector to provide a comprehensive text that will be of interest to researchers, graduate students and industry professionals.
Download or read book Control and Operation of Grid Connected Wind Farms written by John N. Jiang and published by Springer. This book was released on 2016-05-31 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of grid integration and operation, this monograph advances the subject of wind energy control from the individual-unit to the wind-farm level. The basic objectives and requirements for successful integration of wind energy with existing power grids are discussed, followed by an overview of the state of the art, proposed solutions and challenges yet to be resolved. At the individual-turbine level, a nonlinear controller based on feedback linearization, uncertainty estimation and gradient-based optimization is shown robustly to control both active and reactive power outputs of variable-speed turbines with doubly-fed induction generators. Heuristic coordination of the output of a wind farm, represented by a single equivalent turbine with energy storage to optimize and smooth the active power output is presented. A generic approximate model of wind turbine control developed using system identification techniques is proposed to advance research and facilitate the treatment of control issues at the wind-farm level. A supervisory wind-farm controller is then introduced with a view to maximizing and regulating active power output under normal operating conditions and unusual contingencies. This helps to make the individual turbines cooperate in such as way that the overall output of the farm accurately tracks a reference and/or is statistically as smooth as possible to improve grid reliability. The text concludes with an overall discussion of the promise of advanced wind-farm control techniques in making wind an economic energy source and beneficial influence on grid performance. The challenges that warrant further research are succinctly enumerated. Control and Operation of Grid-Connected Wind Farms is primarily intended for researchers from a systems and control background wishing to apply their expertise to the area of wind-energy generation. At the same time, coverage of contemporary solutions to fundamental operational problems will benefit power/energy engineers endeavoring to promote wind as a reliable and clean source of electrical power.
Download or read book Stability Augmentation of a Grid connected Wind Farm written by S. M. Muyeen and published by Springer Science & Business Media. This book was released on 2008-09-25 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Stability Augmentation of a Grid-connected Wind Farm” introduces a comprehensive approach to stabilizing the power output from wind farms, covering both fixed and variable speed wind turbine generator systems. The book presents the different tools suitable for application in wind farms, together with modeling and control strategies. The book reports on output power and terminal voltage fluctuation minimization, using the integration of energy storage systems with power electronic converters. Transient stability enhancement of the power systems is also discussed. “Stability Augmentation of a Grid-connected Wind Farm” provides advanced tools with detailed modeling and controller design, including extensive simulation results.
Download or read book Wind Solar Hybrid Renewable Energy System written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2020-02-26 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a platform for scientists and engineers to comprehend the technologies of solar wind hybrid renewable energy systems and their applications. It describes the thermodynamic analysis of wind energy systems, and advanced monitoring, modeling, simulation, and control of wind turbines. Based on recent hybrid technologies considering wind and solar energy systems, this book also covers modeling, design, and optimization of wind solar energy systems in conjunction with grid-connected distribution energy management systems comprising wind photovoltaic (PV) models. In addition, solar thermochemical fuel generation topology and evaluation of PV wind hybrid energy for a small island are also included in this book. Since energy storage plays a vital role in renewable energy systems, another salient part of this book addresses the methodology for sizing hybrid battery-backed power generation systems in off-grid connected locations. Furthermore, the book proposes solutions for sustainable rural development via passive solar housing schemes, and the impacts of renewable energies in general, considering social, economic, and environmental factors. Because this book proposes solutions based on recent challenges in the area of hybrid renewable technologies, it is hoped that it will serve as a useful reference to readers who would like to be acquainted with new strategies of control and advanced technology regarding wind solar hybrid systems
Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)
Download or read book Stability Control and Reliable Performance of Wind Turbines written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for academics and engineers working in universities, research institutes, and industry sectors wishing to acquire new information and enhance their knowledge of the current trends in wind turbine technology. Readers will gain new ideas and special experience with in-depth information about modeling, stability control, assessment, reliability, and future prospects of wind turbines. This book contains a number of problems and solutions that can be integrated into larger research findings and projects. The book enhances studies concerning the state of the art of wind turbines, modeling and intelligent control of wind turbines, power quality of wind turbines, robust controllers for wind turbines in cold weather, etc. The book also looks at recent developments in wind turbine supporting structures, noise reduction estimation methods, reliability and prospects of wind turbines, etc. As I enjoyed preparing this book, I am sure that it will be valuable for a large sector of readers.
Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.
Download or read book Operation and Control of Renewable Energy Systems written by Mukhtar Ahmad and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference to renewable energy technologies with a focus on power generation and integration into power systems This book addresses the generation of energy (primarily electrical) through various renewable sources. It discusses solar and wind power—two major resources that are now in use in small as well as large-scale power production—and their requirements for effectively using advanced control techniques.In addition, the book looks at theintegration of renewable energy in the power grid and its ability to work in a micro grid. Operation and Control of Renewable Energy Systems describes the numerous types of renewable energy sources available and the basic principles involving energy conversion, including the theory of fluid mechanics and the laws of thermodynamics. Chapter coverage includes the theory of power electronics and various electric power generators, grid scale energy storage systems, photovoltaic power generation, solar thermal energy conversion technology, horizontal and vertical wind turbines for power generation, and more. Covers integration into power systems with an emphasis on microgrids Introduces a wide range of subjects related to renewable energy systems, including energy storage, microgrids, and battery technologies Includes tutorial materials such as up-to-date references for wind energy, grid connection, and power electronics—plus worked examples and solutions Operation and Control of Renewable Energy Systems is the perfect introduction to renewable energy technologies for undergraduate and graduate students and can also be very useful to practicing engineers.
Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters
Download or read book Wind Energy Generation Modelling and Control written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY GENERATION WIND ENERGY GENERATION MODELLING AND CONTROL With increasing concern over climate change and the security of energy supplies, wind power is emerging as an important source of electrical energy throughout the world. Modern wind turbines use advanced power electronics to provide efficient generator control and to ensure compatible operation with the power system. Wind Energy Generation describes the fundamental principles and modelling of the electrical generator and power electronic systems used in large wind turbines. It also discusses how they interact with the power system and the influence of wind turbines on power system operation and stability. Key features: Includes a comprehensive account of power electronic equipment used in wind turbines and for their grid connection. Describes enabling technologies which facilitate the connection of large-scale onshore and offshore wind farms. Provides detailed modelling and control of wind turbine systems. Shows a number of simulations and case studies which explain the dynamic interaction between wind power and conventional generation.
Download or read book Power Electronics for Modern Wind Turbines written by Frede Blaabjerg and published by Morgan & Claypool Publishers. This book was released on 2006 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The introduction of power electronics is changing the basic characteristic of wind turbines from being an energy source to be an active power source. With prices of power electronic devices falling, these solutions become more and more attractive. Power Electronics for Modern Wind Turbines introduce the electrical aspects of modern wind generation systems, including modern power electronics and converters, electric generation and conversion systems for both fixed speed and variable speed systems, control techniques for wind turbines, configurations of wind farms, and the issues of integrating wind turbines into power systems.
Download or read book Integration of Renewable Energy Sources with Smart Grid written by M. Kathiresh and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTEGRATION OF RENEWABLE ENERGY SOURCES WITH SMART GRID Provides comprehensive coverage of renewable energy and its integration with smart grid technologies. This book starts with an overview of renewable energy technologies, smart grid technologies, and energy storage systems and covers the details of renewable energy integration with smart grid and the corresponding controls. It also provides an enhanced perspective on the power scenario in developing countries. The requirement of the integration of smart grid along with the energy storage systems is deeply discussed to acknowledge the importance of sustainable development of a smart city. The methodologies are made quite possible with highly efficient power convertor topologies and intelligent control schemes. These control schemes are capable of providing better control with the help of machine intelligence techniques and artificial intelligence. The book also addresses modern power convertor topologies and the corresponding control schemes for renewable energy integration with smart grid. The design and analysis of power converters that are used for the grid integration of solar PV along with simulation and experimental results are illustrated. The protection aspects of the microgrid with power electronic configurations for wind energy systems are elucidated. The book also discusses the challenges and mitigation measure in renewable energy integration with smart grid. Audience The core audience is hardware and software engineers working on renewable energy integration related projects, microgrids, smart grids and computing algorithms for converter and inverter circuits. Researchers and students in electrical, electronics and computer engineering will also benefit reading the book.
Download or read book Grid Integration of Wind Energy written by Siegfried Heier and published by John Wiley & Sons. This book was released on 2014-04-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This popular reference describes the integration of wind-generated power into electrical power systems and, with the use of advanced control systems, illustrates how wind farms can be made to operate like conventional power plants. Fully revised, the third edition provides up-to-date coverage on new generator developments for wind turbines, recent technical developments in electrical power conversion systems, control design and essential operating conditions. With expanded coverage of offshore technologies, this edition looks at the characteristics and static and dynamic behaviour of offshore wind farms and their connection to the mainland grid. Brand new material includes: comprehensive treatment of onshore and offshore grid integration updated legislative guidelines for the design, construction and installation of wind power plants the fundamental characteristics and theoretical tools of electrical and mechanical components and their interactions new and future types of generators, converters, power electronics and controller designs improved use of grid capacities and grid support for fixed- and variable-speed controlled wind power plants options for grid control and power reserve provision in wind power plants and wind farms This resource is an excellent guide for researchers and practitioners involved in the planning, installation and grid integration of wind turbines and power plants. It is also highly beneficial to university students studying wind power technology, renewable energy and power systems, and to practitioners in wind engineering, turbine design and manufacture and electrical power engineering.
Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2011-01-13 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. It has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. Designed to appeal to a new generation of engineering professionals, Power Electronics Handbook, 3rd Edition features four new chapters covering renewable energy, energy transmission, energy storage, as well as an introduction to Distributed and Cogeneration (DCG) technology, including gas turbines, gensets, microturbines, wind turbines, variable speed generators, photovoltaics and fuel cells, has been gaining momentum for quite some time now.smart grid technology. With this book readers should be able to provide technical design leadership on assigned power electronics design projects and lead the design from the concept to production involving significant scope and complexity. - Contains 45 chapters covering all aspects of power electronics and its applications - Three new chapters now including coverage Energy Sources, Energy Storage and Electric Power Transmission - Contributions from more than fifty leading experts spanning twelve different countries
Download or read book Wind Turbines written by Erich Hau and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Turbines addresses all those professionally involved in research, development, manufacture and operation of wind turbines. It provides a cross-disciplinary overview of modern wind turbine technology and an orientation in the associated technical, economic and environmental fields. It is based on the author's experience gained over decades designing wind energy converters with a major industrial manufacturer and, more recently, in technical consulting and in the planning of large wind park installations, with special attention to economics. The second edition accounts for the emerging concerns over increasing numbers of installed wind turbines. In particular, an important new chapter has been added which deals with offshore wind utilisation. All advanced chapters have been extensively revised and in some cases considerably extended
Download or read book Integration of Large Scale Wind Energy with Electrical Power Systems in China written by Zongxiang Lu and published by John Wiley & Sons. This book was released on 2018-03-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth examination of large scale wind projects and electricity production in China Presents the challenges of electrical power system planning, design, operation and control carried out by large scale wind power, from the Chinese perspective Focuses on the integration issue of large scale wind power to the bulk power system, probing the interaction between wind power and bulk power systems Wind power development is a burgeoning area of study in developing countries, with much interest in offshore wind farms and several big projects under development English translation of the Chinese language original which won the "Fourth China Outstanding Publication Award nomination" in March 2013