Download or read book 2017 5th International Conference on Control Instrumentation and Automation ICCIA written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidance and Control of Underwater Vehicles 2003 GCUV 2003 written by G. N. Roberts and published by Elsevier Science & Technology. This book was released on 2003 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains forty papers from the 1st IFAC Workshop on Guidance and Control of Underwater Vehicles. The aim of the Workshop was to bring together academic practitioners and industrialists involved in this important and expanding area of interest in order to exchange experiences on recent advances in this field. Topics covered by the papers in this proceeding include UUV Control Applications, System Identification, UUV Architectures, Navigation, Modelling, Fault Detection and Reconfiguration. Contributors from Italy, Ireland, Japan, Portugal, Spain, Turkey, USA and the United Kingdom were represented at the workshop.The Workshop was voted a resounding success by all delegates and in the light of this vote of confidence the Technical Committee on Marine Systems is planning to run this event again in 2005, with the slightly amended title of Navigation, Guidance and Control of Underwater Vehicles

Download or read book Underwater Vehicles written by Alexander Inzartsev and published by BoD – Books on Demand. This book was released on 2009-01-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the latest twenty to thirty years, a significant number of AUVs has been created for the solving of wide spectrum of scientific and applied tasks of ocean development and research. For the short time period the AUVs have shown the efficiency at performance of complex search and inspection works and opened a number of new important applications. Initially the information about AUVs had mainly review-advertising character but now more attention is paid to practical achievements, problems and systems technologies. AUVs are losing their prototype status and have become a fully operational, reliable and effective tool and modern multi-purpose AUVs represent the new class of underwater robotic objects with inherent tasks and practical applications, particular features of technology, systems structure and functional properties.

Download or read book Proceedings of the 9th International Symposium on Unmanned Untethered Submersible Technology September 27 29 1995 written by and published by . This book was released on 1995 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autonomous Underwater Vehicles written by Nuno Cruz and published by BoD – Books on Demand. This book was released on 2011-10-21 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous Underwater Vehicles (AUVs) are remarkable machines that revolutionized the process of gathering ocean data. Their major breakthroughs resulted from successful developments of complementary technologies to overcome the challenges associated with autonomous operation in harsh environments. Most of these advances aimed at reaching new application scenarios and decreasing the cost of ocean data collection, by reducing ship time and automating the process of data gathering with accurate geo location. With the present capabilities, some novel paradigms are already being employed to further exploit the on board intelligence, by making decisions on line based on real time interpretation of sensor data. This book collects a set of self contained chapters covering different aspects of AUV technology and applications in more detail than is commonly found in journal and conference papers. They are divided into three main sections, addressing innovative vehicle design, navigation and control techniques, and mission preparation and analysis. The progress conveyed in these chapters is inspiring, providing glimpses into what might be the future for vehicle technology and applications.

Download or read book Proceedings of SAI Intelligent Systems Conference IntelliSys 2016 written by Yaxin Bi and published by Springer. This book was released on 2017-08-22 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the SAI Intelligent Systems Conference 2016 (IntelliSys 2016) offer a remarkable collection of papers on a wide range of topics in intelligent systems, and their applications to the real world. Authors hailing from 56 countries on 5 continents submitted 404 papers to the conference, attesting to the global importance of the conference’s themes. After being reviewed, 222 papers were accepted for presentation, and 168 were ultimately selected for these proceedings. Each has been reviewed on the basis of its originality, novelty and rigorousness. The papers not only present state-of-the-art methods and valuable experience from researchers in the related research areas; they also outline the field’s future development.

Download or read book Control of Ships and Underwater Vehicles written by Khac Duc Do and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most ocean vessels are underactuated but control of their motion in the real ocean environment is essential. Starting with a review of the background on ocean-vessel dynamics and nonlinear control theory, the authors’ systematic approach is based on various nontrivial coordinate transformations coupled with advanced nonlinear control design methods. This strategy is then used for the development and analysis of a number of ocean-vessel control systems with the aim of achieving advanced motion control tasks including stabilization, trajectory-tracking, path-tracking and path-following. Control of Ships and Underwater Vehicles offers the reader: - new results in the nonlinear control of underactuated ocean vessels; - efficient designs for the implementation of controllers on underactuated ocean vessels; - numerical simulations and real-time implementations of the control systems designed on a scale-model ship for each controller developed to illustrate their effectiveness and afford practical guidance.

Download or read book Underwater Robots written by Gianluca Antonelli and published by Springer. This book was released on 2018-04-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic in underwater robotics. One of the first volumes in the “Springer Tracts in Advanced Robotics” series, it has been a bestseller through the previous three editions. Fifteen years after the publication of the first edition, the fourth edition comes to print. The book addresses the main control aspects in underwater manipulation tasks. With respect to the third edition, it has been revised, extended and some concepts better clustered. The mathematical model with significant impact on the control strategy is discussed. The problem of controlling a 6-degrees-of-freedoms autonomous underwater vehicle is investigated and a survey of fault detection/tolerant strategies for unmanned underwater vehicles is provided. Inverse kinematics, dynamic and interaction control for underwater vehicle-manipulator systems are then discussed. The code used to generate most of the numerical simulations is made available and briefly discussed.

Download or read book Proceedings of 3rd 2023 International Conference on Autonomous Unmanned Systems 3rd ICAUS 2023 written by Yi Qu and published by Springer Nature. This book was released on with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Inertial Quasi Velocity Based Controllers for a Class of Vehicles written by Przemyslaw Herman and published by Springer Nature. This book was released on 2022-02-26 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely overview of nonlinear control methods applied to a set of vehicles and their applications to study vehicle dynamics. The first part on the book presents the mathematical models used for describing motion of three class of vehicles such as underwater vehicles, hovercrafts and airships. In turn, each model is expressed in terms of Inertial Quasi-Velocities. Various control strategies from the literature, including model-free ones, are then analyzed. The second part and core of the book guides readers to developing model-based control algorithms using Inertial Quasi-Velocities. Both non-adaptive and adaptive versions are covered. Each controller is validated through simulation tests, which are reported in detail. In turn, this part shows how to use the controllers to gain information about vehicle dynamics, thus describing an important relationship between the dynamics of the moving object and its motion control. The effects of mechanical couplings between variables describing vehicle motion due to inertial forces are also discussed. All in all, this book offers a timely guide and extensive information on nonlinear control schemes for unmanned marine and aerial vehicles. It covers specifically the simulation tests and is therefore meant as a starting point for engineers and researchers that would like to verify experimentally the suitability of the proposed models in real vehicles. Further, it also supports advanced-level students and educators in their courses on vehicle dynamics, control engineering and robotics.

Download or read book Advances and Applications in Nonlinear Control Systems written by Sundarapandian Vaidyanathan and published by Springer. This book was released on 2016-03-17 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances and applications of nonlinear control systems. It consists of 30 contributed chapters by subject experts who are specialized in the various topics addressed in this book. The special chapters have been brought out in the broad areas of nonlinear control systems such as robotics, nonlinear circuits, power systems, memristors, underwater vehicles, chemical processes, observer design, output regulation, backstepping control, sliding mode control, time-delayed control, variables structure control, robust adaptive control, fuzzy logic control, chaos, hyperchaos, jerk systems, hyperjerk systems, chaos control, chaos synchronization, etc. Special importance was given to chapters offering practical solutions, modeling and novel control methods for the recent research problems in nonlinear control systems. This book will serve as a reference book for graduate students and researchers with a basic knowledge of electrical and control systems engineering. The resulting design procedures on the nonlinear control systems are emphasized using MATLAB software.

Download or read book Time Critical Cooperative Control of Autonomous Air Vehicles written by Isaac Kaminer and published by Butterworth-Heinemann. This book was released on 2017-08-02 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-Critical Cooperative Control of Autonomous Air Vehicles presents, in an easy-to-read style, the latest research conducted in the industry, while also introducing a set of novel ideas that illuminate a new approach to problem-solving. The book is virtually self-contained, giving the reader a complete, integrated presentation of the different concepts, mathematical tools, and control solutions needed to tackle and solve a number of problems concerning time-critical cooperative control of UAVs. By including case studies of fixed-wing and multirotor UAVs, the book effectively broadens the scope of application of the methodologies developed. This theoretical presentation is complemented with the results of flight tests with real UAVs, and is an ideal reference for researchers and practitioners from academia, research labs, commercial companies, government workers, and those in the international aerospace industry. - Addresses important topics related to time-critical cooperative control of UAVs - Describes solutions to the problems rooted in solid dynamical systems theory - Applies the solutions developed to fixed-wing and multirotor UAVs - Includes the results of field tests with both classes of UAVs

Download or read book Cooperative Control Design written by He Bai and published by Springer Science & Business Media. This book was released on 2011-06-03 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cooperative Control Design: A Systematic, Passivity-Based Approach discusses multi-agent coordination problems, including formation control, attitude coordination, and synchronization. The goal of the book is to introduce passivity as a design tool for multi-agent systems, to provide exemplary work using this tool, and to illustrate its advantages in designing robust cooperative control algorithms. The discussion begins with an introduction to passivity and demonstrates how passivity can be used as a design tool for motion coordination. Followed by the case of adaptive redesigns for reference velocity recovery while describing a basic design, a modified design and the parameter convergence problem. Formation control is presented as it relates to relative distance control and relative position control. The coverage is concluded with a comprehensive discussion of agreement and the synchronization problem with an example using attitude coordination.

Download or read book Intelligent Systems written by Siba K. Udgata and published by Springer Nature. This book was released on 2021-04-19 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features best selected research papers presented at the International Conference on Machine Learning, Internet of Things and Big Data (ICMIB 2020) held at Indira Gandhi Institute of Technology, Sarang, India, during September 2020. It comprises high-quality research work by academicians and industrial experts in the field of machine learning, mobile computing, natural language processing, fuzzy computing, green computing, human–computer interaction, information retrieval, intelligent control, data mining and knowledge discovery, evolutionary computing, IoT and applications in smart environments, smart health, smart city, wireless networks, big data, cloud computing, business intelligence, internet security, pattern recognition, predictive analytics applications in healthcare, sensor networks and social sensing and statistical analysis of search techniques.

Download or read book Optimization for Control Observation and Safety written by Guillermo Valencia-Palomo and published by MDPI. This book was released on 2020-04-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most used tools in control theory to compute control laws, adjust parameters (tuning), estimate states, fit model parameters, find conditions in order to fulfill a given closed-loop property, among others. Optimization also plays an important role in the design of fault detection and isolation systems to prevent safety hazards and production losses that require the detection and identification of faults, as early as possible to minimize their impacts by implementing real-time fault detection and fault-tolerant systems. Recently, it has been proven that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved easily and efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This book offers an overview of the state-of-the-art of the most advanced optimization techniques and their applications in control engineering.

Download or read book Proceedings of 2022 International Conference on Autonomous Unmanned Systems ICAUS 2022 written by Wenxing Fu and published by Springer Nature. This book was released on 2023-03-10 with total page 3985 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the ICAUS 2022, which offers a unique and interesting platform for scientists, engineers and practitioners throughout the world to present and share their most recent research and innovative ideas. The aim of the ICAUS 2022 is to stimulate researchers active in the areas pertinent to intelligent unmanned systems. The topics covered include but are not limited to Unmanned Aerial/Ground/Surface/Underwater Systems, Robotic, Autonomous Control/Navigation and Positioning/ Architecture, Energy and Task Planning and Effectiveness Evaluation Technologies, Artificial Intelligence Algorithm/Bionic Technology and Its Application in Unmanned Systems. The papers showcased here share the latest findings on Unmanned Systems, Robotics, Automation, Intelligent Systems, Control Systems, Integrated Networks, Modeling and Simulation. It makes the book a valuable asset for researchers, engineers, and university students alike.

Download or read book Intelligent Robotics and Applications written by Chun-Yi Su and published by Springer. This book was released on 2012-09-28 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volume set LNAI 7506, LNAI 7507 and LNAI 7508 constitutes the refereed proceedings of the 5th International Conference on Intelligent Robotics and Applications, ICIRA 2012, held in Montreal, Canada, in October 2012. The 197 revised full papers presented were thoroughly reviewed and selected from 271 submissions. They present the state-of-the-art developments in robotics, automation and mechatronics. This volume covers the topics of robotics for rehabilitation and assistance; mechatronics and integration technology in electronics and information devices fabrication; man-machine interactions; manufacturing; micro and nano systems; mobile robots and intelligent autonomous systems; motion control; multi-agent systems and distributed control; and multi-sensor data fusion algorithms.