Download or read book Groundwater Modelling in Arid and Semi Arid Areas written by Howard S. Wheater and published by Cambridge University Press. This book was released on 2010-09-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Arid and semi-arid regions face major challenges in the management of scarce freshwater resources under pressures of population, economic development, climate change, pollution and over-abstraction. Groundwater is commonly the most important water resource in these areas. Groundwater models are widely used globally to understand groundwater systems and to guide decisions on management. However, the hydrology of arid and semi-arid areas is very different from that of humid regions, and there is little guidance on the special challenges of groundwater modelling for these areas. This book brings together the experience of internationally leading experts to fill a gap in the scientific and technical literature. It introduces state-of-the-art methods for modelling groundwater resources, illustrated with a wide-ranging set of illustrative examples from around the world. The book is valuable for researchers, practitioners in developed and developing countries, and graduate students in hydrology, hydrogeology, water resources management, environmental engineering and geography.

Download or read book Parallel Computing written by Roman Trobec and published by Springer Science & Business Media. This book was released on 2009-06-18 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of parallel programming and architectures is essential for simulating and solving problems in modern computational practice. There has been rapid progress in microprocessor architecture, interconnection technology and software devel- ment, which are in?uencing directly the rapid growth of parallel and distributed computing. However, in order to make these bene?ts usable in practice, this dev- opment must be accompanied by progress in the design, analysis and application aspects of parallel algorithms. In particular, new approaches from parallel num- ics are important for solving complex computational problems on parallel and/or distributed systems. The contributions to this book are focused on topics most concerned in the trends of today’s parallel computing. These range from parallel algorithmics, progr- ming, tools, network computing to future parallel computing. Particular attention is paid to parallel numerics: linear algebra, differential equations, numerical integ- tion, number theory and their applications in computer simulations, which together form the kernel of the monograph. We expect that the book will be of interest to scientists working on parallel computing, doctoral students, teachers, engineers and mathematicians dealing with numerical applications and computer simulations of natural phenomena.

Download or read book High Performance Concrete written by Y. Malier and published by CRC Press. This book was released on 2018-05-08 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough review of properties, durability and use of high performance concrete, derived from recent research and experience. This book contains contributions from the leading French, Canadian and Swiss researchers, designers and material specialists, translated into English for the first time.

Download or read book Satellite Situation Report written by Goddard Space Flight Center. Office of Public Affairs and published by . This book was released on 1977 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.

Download or read book Dictionary of Building and Civil Engineering written by Don Montague and published by Taylor & Francis. This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dual-language dictionary lists over 20,000 specialist terms in both French and English, covering architecture, building, engineering and property terms. It meets the needs of all building professionals working on projects overseas. It has been comprehensively researched and compiled to provide an invaluable reference source in an increasingly European marketplace.

Download or read book Women and Trade written by World Bank;World Trade Organization and published by World Bank Publications. This book was released on 2020-09-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trade can dramatically improve women’s lives, creating new jobs, enhancing consumer choices, and increasing women’s bargaining power in society. It can also lead to job losses and a concentration of work in low-skilled employment. Given the complexity and specificity of the relationship between trade and gender, it is essential to assess the potential impact of trade policy on both women and men and to develop appropriate, evidence-based policies to ensure that trade helps to enhance opportunities for all. Research on gender equality and trade has been constrained by limited data and a lack of understanding of the connections among the economic roles that women play as workers, consumers, and decision makers. Building on new analyses and new sex-disaggregated data, Women and Trade: The Role of Trade in Promoting Gender Equality aims to advance the understanding of the relationship between trade and gender equality and to identify a series of opportunities through which trade can improve the lives of women.

Download or read book Advances in Hydroinformatics written by Philippe Gourbesville and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of extended papers which have been selected for presentation during the SIMHYDRO 2012 conference held in Sophia Antipolis in September 2012. The papers present the state of the art numerical simulation in domains such as (1) New trends in modelling for marine, river & urban hydraulics; (2) Stakeholders & practitioners of simulation; (3) 3D CFD & applications. All papers have been peer reviewed and by scientific committee members with report about quality, content and originality. The target audience for this book includes scientists, engineers and practitioners involved in the field of numerical modelling in the water sector: flood management, natural resources preservation, hydraulic machineries, and innovation in numerical methods, 3D developments and applications.

Download or read book Numerical Methods for Partial Differential Equations written by Sandip Mazumder and published by Academic Press. This book was released on 2015-12-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods for Partial Differential Equations: Finite Difference and Finite Volume Methods focuses on two popular deterministic methods for solving partial differential equations (PDEs), namely finite difference and finite volume methods. The solution of PDEs can be very challenging, depending on the type of equation, the number of independent variables, the boundary, and initial conditions, and other factors. These two methods have been traditionally used to solve problems involving fluid flow. For practical reasons, the finite element method, used more often for solving problems in solid mechanics, and covered extensively in various other texts, has been excluded. The book is intended for beginning graduate students and early career professionals, although advanced undergraduate students may find it equally useful. The material is meant to serve as a prerequisite for students who might go on to take additional courses in computational mechanics, computational fluid dynamics, or computational electromagnetics. The notations, language, and technical jargon used in the book can be easily understood by scientists and engineers who may not have had graduate-level applied mathematics or computer science courses. - Presents one of the few available resources that comprehensively describes and demonstrates the finite volume method for unstructured mesh used frequently by practicing code developers in industry - Includes step-by-step algorithms and code snippets in each chapter that enables the reader to make the transition from equations on the page to working codes - Includes 51 worked out examples that comprehensively demonstrate important mathematical steps, algorithms, and coding practices required to numerically solve PDEs, as well as how to interpret the results from both physical and mathematic perspectives

Download or read book AGARD Conference Proceedings written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Taxonomy written by Joseph Felsenstein and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on Numerical Taxonomy took place on the 4th - 16th of July, 1982, at the Kur- und Kongresshotel Residenz in Bad Windsheim, Federal Republic of Germany. This volume is the proceedings of that meeting, and contains papers by over two-thirds of the participants in the Institute. Numerical taxonomy has been attracting increased attention from systematists and evolutionary biologists. It is an area which has been marked by debate and conflict, sometimes bitter. Happily, this meeting took place in an atmosphere of "GemUtlichkeit", though scarcely of unanimity. I believe that these papers will show that there is an increased understanding by each taxonomic school of each others' positions. This augurs a period in which the debates become more concrete and specific. Let us hope that they take place in a scientific atmosphere which has occasionally been lacking in the past. Since the order of presentation of papers in the meeting was affected by time constraints, I have taken the liberty of rearranging them into a more coherent subject ordering. The first group of papers, taken from the opening and closing days of the meeting, debate philosophies of classification. The next two sections have papers on congruence, clustering and ordination. A notable concern of these participants is the comparison and testing of classifications. This has been missing from many previous discussions of numerical classification.

Download or read book Space Debris written by Heiner Klinkrad and published by Springer Science & Business Media. This book was released on 2006-09-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future evolution of the debris environment will be forecast on the basis of traffic models and possible hazard mitigation practices. The text shows how large trackable objects will have re-entry pinpointed and predictions made on related risk assessment for possible ground impact. Models will also be described for meteoroids which are also a prevailing risk.

Download or read book Amongst Mathematicians written by Elena Nardi and published by Springer Science & Business Media. This book was released on 2008 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique perspective on ways in which mathematicians: perceive their students' learning; teach; reflect on their teaching practice. Elena Nardi achieves this by employing two fictional, yet entirely data-grounded, characters to create a conversation on these important issues. The construction of these characters is based on large bodies of data including intense focused group interviews with mathematicians and extensive analyses of students' written work, collected and analyzed over a substantial period.

Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2012 written by Nicholas Ayache and published by Springer. This book was released on 2012-08-28 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 7510, 7511, and 7512 constitutes the refereed proceedings of the 15th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2012, held in Nice, France, in October 2012. Based on rigorous peer reviews, the program committee carefully selected 252 revised papers from 781 submissions for presentation in three volumes. The third volume includes 79 papers organized in topical sections on diffusion imaging: from acquisition to tractography; image acquisition, segmentation and recognition; image registration; neuroimage analysis; analysis of microscopic and optical images; image segmentation; diffusion weighted imaging; computer-aided diagnosis and planning; and microscopic image analysis.

Download or read book Statistical Inference for Ergodic Diffusion Processes written by Yury A. Kutoyants and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book in inference for stochastic processes from a statistical, rather than a probabilistic, perspective. It provides a systematic exposition of theoretical results from over ten years of mathematical literature and presents, for the first time in book form, many new techniques and approaches.

Download or read book Product Life Cycle Management written by Max Giordano and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive view of the most recent major international research in the field of tolerancing, and is an excellent resource for anyone interested in Computer Aided Tolerating. It is organized into 4 parts. Part 1 focuses on the more general problems of tolerance analysis and synthesis, for tolerancing in mechanical design and manufacturing processes. Part 2 specifically highlights the simulation of assembly with defects, and the influence of tolerances on the quality of the assembly. Part 3 deals with measurement aspects, and quality control throughout the life cycle. Different measurement technologies and methods for estimating uncertainty are considered. In Part 4, different aspects of tolerancing and their interactions are explored, from the definition of functional requirement to measurement processes in a PLM approach.

Download or read book Semiparametric Theory and Missing Data written by Anastasios Tsiatis and published by Springer Science & Business Media. This book was released on 2007-01-15 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes current knowledge regarding the theory of estimation for semiparametric models with missing data, in an organized and comprehensive manner. It starts with the study of semiparametric methods when there are no missing data. The description of the theory of estimation for semiparametric models is both rigorous and intuitive, relying on geometric ideas to reinforce the intuition and understanding of the theory. These methods are then applied to problems with missing, censored, and coarsened data with the goal of deriving estimators that are as robust and efficient as possible.