Download or read book Digital and Analogue Instrumentation written by Nihal Kularatna and published by IET. This book was released on 2003 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A substantial update of his earlier IEE book, Modern Electronic Test and Measuring Instruments, the author provides a state-of-the art review of modern families of digital instruments. For each family he covers internal design, use and applications, highlighting their advantages and limitations from a practical application viewpoint.The book also treats new digital instrument families such as DSOs, Arbitrary Function Generators, FFT analysers and many other common systems used by the test engineers, designers and research scientists.

Download or read book Proceedings of the 1st International Conference on Smart Innovation Ergonomics and Applied Human Factors SEAHF written by César Benavente-Peces and published by Springer. This book was released on 2020-08-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of real-world issues including industrial activity, energy management, education, business and health. Today, technology is a part of virtually every human activity, and is used to support, monitor and manage equipment, facilities, commodities, industry, business, and individuals’ health, among others. As technology evolves, new applications, methods and techniques arise, while at the same time citizens’ expectations from technology continue to grow. In order to meet the nearly insatiable demand for new applications, better performance and higher reliability, trustworthiness, security, and power consumption efficiency, engineers must deliver smart innovations, i.e., must develop the best techniques, technologies and services in a way that respects human beings and the environment. With that goal in mind, the key topics addressed in this book are: smart technologies and artificial intelligence, green energy systems, aerospace engineering/robotics and IT, information security and mobile engineering, IT in bio-medical engineering and smart agronomy, smart marketing, management and tourism policy, technology and education, and hydrogen and fuel-cell energy technologies.

Download or read book Programming for Electrical Engineers written by James C. Squire and published by Academic Press. This book was released on 2020-07-08 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming for Electrical Engineers: MATLAB and Spice introduces beginning engineering students to programming in Matlab and Spice through engaged, problem-based learning and dedicated electrical and computer engineering content. The book draws its problems and examples specifically from electrical and computer engineering, covering such topics as circuit analysis, signal processing, and filter design. It teaches relevant computational techniques in the context of solving common problems in electrical and computer engineering, including mesh and nodal analysis, Fourier transforms, and phasor analysis. Programming for Electrical Engineers: MATLAB and Spice is unique among MATLAB textbooks for its dual focus on introductory-level learning and discipline-specific content in electrical and computer engineering. No other textbook on the market currently targets this audience with the same attention to discipline-specific content and engaged learning practices. Although it is primarily an introduction to programming in MATLAB, the book also has a chapter on circuit simulation using Spice, and it includes materials required by ABET Accreditation reviews, such as information on ethics, professional development, and lifelong learning. - Discipline-specific: Introduces Electrical and Computer Engineering-specific topics, such as phasor analysis and complex exponentials, that are not covered in generic engineering Matlab texts - Accessible: Pedagogically appropriate for freshmen and sophomores with little or no prior programming experience - Scaffolded content: Addresses both script and functions but emphasizes the use of functions since scripts with non-scoped variables are less-commonly encountered after introductory courses - Problem-centric: Introduces MATLAB commands as needed to solve progressively more complex EE/ECE-specific problems, and includes over 100 embedded, in-chapter questions to check comprehension in stages and support active learning exercises in the classroom - Enrichment callouts: "Pro Tip" callouts cover common ABET topics, such as ethics and professional development, and "Digging Deeper" callouts provide optional, more detailed material for interested students

Download or read book Applications of X ray Computed Tomography in the Geosciences written by Florias Mees and published by Geological Society of London. This book was released on 2003 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.

Download or read book Dictionary of Building and Civil Engineering written by Don Montague and published by Taylor & Francis. This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dual-language dictionary lists over 20,000 specialist terms in both French and English, covering architecture, building, engineering and property terms. It meets the needs of all building professionals working on projects overseas. It has been comprehensively researched and compiled to provide an invaluable reference source in an increasingly European marketplace.

Download or read book Radio Wave Propagation for Telecommunication Applications written by Hervé Sizun and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the physical mechanisms involved in the propagation of electromagnetic waves in the radiofrequency range, inside and outside buildings, in the terrestrial and near space environments, with a special focus on mobile radio communication. It combines a theoretical and an experimental approaches with an understanding of the physical environment through adequate formulations of the laws of electromagnetism. It should thus provide the background needed by advanced students and development engineers for the conception of high quality and reliable telecommunication systems.

Download or read book Design of Analog Multipliers with Operational Amplifiers written by K.C. Selvam and published by CRC Press. This book was released on 2019-07-12 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of analog multipliers discusses what an analog multiplier and its related types is, how different types of analog multipliers are implemented with analog two to one multiplexers and op-amps, and how the types of analog multipliers are implemented with transistors and op-amps. Describing forty-eight analog multiplier circuits, book explains six building blocks as integrator, comparator, switch, low pass filter, peak detector and sample & hold circuit. All analog multiplier circuits presented in this book use a maximum of four operational amplifiers which will enable the readers to simulate the multipliers with minimum number of components and use for their application at low cost.

Download or read book Strap down Inertial Systems written by and published by . This book was released on 1978 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods for Partial Differential Equations written by Sandip Mazumder and published by Academic Press. This book was released on 2015-12-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods for Partial Differential Equations: Finite Difference and Finite Volume Methods focuses on two popular deterministic methods for solving partial differential equations (PDEs), namely finite difference and finite volume methods. The solution of PDEs can be very challenging, depending on the type of equation, the number of independent variables, the boundary, and initial conditions, and other factors. These two methods have been traditionally used to solve problems involving fluid flow. For practical reasons, the finite element method, used more often for solving problems in solid mechanics, and covered extensively in various other texts, has been excluded. The book is intended for beginning graduate students and early career professionals, although advanced undergraduate students may find it equally useful. The material is meant to serve as a prerequisite for students who might go on to take additional courses in computational mechanics, computational fluid dynamics, or computational electromagnetics. The notations, language, and technical jargon used in the book can be easily understood by scientists and engineers who may not have had graduate-level applied mathematics or computer science courses. - Presents one of the few available resources that comprehensively describes and demonstrates the finite volume method for unstructured mesh used frequently by practicing code developers in industry - Includes step-by-step algorithms and code snippets in each chapter that enables the reader to make the transition from equations on the page to working codes - Includes 51 worked out examples that comprehensively demonstrate important mathematical steps, algorithms, and coding practices required to numerically solve PDEs, as well as how to interpret the results from both physical and mathematic perspectives

Download or read book Audio Effectiveness in Aviation written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Aerospace Medical Panel. Symposium and published by . This book was released on 1997 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Use of Analog and Digital Computers in Hydrology Proceedings of the Tucson Symposium written by tucson Symposium on the use of analog and digital computers in hydrology and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulated Annealing written by Robert Azencott and published by Wiley-Interscience. This book was released on 1992 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited collection of papers, the result of an 18-month workshop held at France's Ecole Normale Superierure, covers the most current research on implementing the simulated algorithm on parallel computers. Professionals and students in mathematics, computer science, and electrical engineering will find theoretical results as well as actual simulations on existing parallel computers, sketching applications in discrete math, chip placement problems and spin glass models.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer. This book was released on 1976 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.

Download or read book Radio Wave Propagation written by Lucien Boithias and published by McGraw-Hill Companies. This book was released on 1987 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Composants et circuits analogiques 2 written by Christian Gontrand and published by ISTE Group. This book was released on 2024-10-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: La micro-électronique couvre un large éventail de domaines, allant du matériau à l’architecture des systèmes, en passant par les processus, le dispositif et le circuit. Depuis deux décennies, on parle aussi de nanoélectronique. La modélisation et les simulations afférentes sont devenues, dans la décennie 1980, un outil indispensable dans le domaine de la fabrication des systèmes intégrés. Ces simulations, devenues assez robustes, ont permis de réduire drastiquement les coûts de recherche et développement. Cet ouvrage complète le volume dédié aux modèles compacts. Ces modèles – sous forme de bibliothèques contenant des paramètres électriques modélisés et souvent obtenus parallèlement par des mesures – sont utilisés pour la simulation de circuits analogiques, en particulier pour l’amplificateur opérationnel, considéré comme le navire amiral de ces simulations.