Download or read book Continuum Theory of Inhomogeneities in Simple Bodies written by W. Noll and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "dislocation" is used in several different senses in the literature of mechanics. In the elassic work of VOLTERRA, WEINGARTEN, and SOMIGLIANA, it refers to particular solutions of the equations of linear elasticity, in which a con tinuous field of strain does not correspond, globally, to a continuous field of dis placement. The configuration of the body so obtained, even when that body is free of all load, is subject to interior stress that does not vanish, and in general no deformation of the body as a wh oIe can bring it into a stress-free configuration. Nevertheless, if any sufficiently sm all part of the body is considered by itself, a configuration for it in which the stress is everywhere zero may be found at once. In this work constitutiL"e assumptions provide the basic data. These consist in prescribed stress-free configurations for each material point and in prescribed elastic moduli governing the response to deformation from the stress-free configuration at each material point. Everything follows from these data, ineluding the dislocations present, if any. In particular, the common boundary-value problems of linear elasticity may be set and solved for the dislocated body.
Download or read book The Rational Spirit in Modern Continuum Mechanics written by Chi-Sing Man and published by Springer Science & Business Media. This book was released on 2006-01-19 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through his voluminous and in?uential writings, editorial activities, organi- tional leadership, intellectual acumen, and strong sense of history, Clifford - brose Truesdell III (1919–2000) was the main architect for the renaissance of - tional continuum mechanics since the middle of the twentieth century. The present collection of 42 essays and research papers pays tribute to this man of mathematics, science, and natural philosophy as well as to his legacy. The ?rst ?ve essays by B. D. Coleman, E. Giusti, W. Noll, J. Serrin, and D. Speiser were texts of addresses given by their authors at the Meeting in memory of Clifford Truesdell, which was held in Pisa in November 2000. In these essays the reader will ?nd personal reminiscences of Clifford Truesdell the man and of some of his activities as scientist, author, editor, historian of exact sciences, and principal founding member of the Society for Natural Philosophy. The bulk of the collection comprises 37 research papers which bear witness to the Truesdellian legacy. These papers cover a wide range of topics; what ties them together is the rational spirit. Clifford Truesdell, in his address upon receipt of a Birkhoff Prize in 1978, put the essence of modern continuum mechanics succinctly as “conceptual analysis, analysis not in the sense of the technical term but in the root meaning: logical criticism, dissection, and creative scrutiny.
Download or read book A First Course in Rational Continuum Mechanics V1 written by and published by Academic Press. This book was released on 1992-02-03 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: A First Course in Rational Continuum Mechanics V1
Download or read book A First Course in Rational Continuum Mechanics written by C. Truesdell and published by Elsevier. This book was released on 2016-06-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A First Course in Rational Continuum Mechanics, Volume 1: General Concepts describes general concepts in rational continuum mechanics and covers topics ranging from bodies and forces to motions and energies, kinematics, and the stress tensor. Constitutive relations are also discussed, and some definitions and theorems of algebra, geometry, and calculus are included. Exercises and their solutions are given as well. Comprised of four chapters, this volume begins with an introduction to rational mechanics by focusing on the mathematical concepts of bodies, forces, motions, and energies. Systems that provide possible universes for mechanics are described. The next chapter explores kinematics, with emphasis on bodies, placements, and motions as well as other relevant concepts like local deformation and homogeneous transplacement. The book also considers the stress tensor and Cauchy's fundamental theorem before concluding with a discussion on constitutive relations. This monograph is designed for students taking a course in mathematics or physics.
Download or read book Differential Geometry and Continuum Mechanics written by Gui-Qiang G. Chen and published by Springer. This book was released on 2015-08-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the exciting interface between differential geometry and continuum mechanics, now recognised as being of increasing technological significance. Topics discussed include isometric embeddings in differential geometry and the relation with microstructure in nonlinear elasticity, the use of manifolds in the description of microstructure in continuum mechanics, experimental measurement of microstructure, defects, dislocations, surface energies, and nematic liquid crystals. Compensated compactness in partial differential equations is also treated. The volume is intended for specialists and non-specialists in pure and applied geometry, continuum mechanics, theoretical physics, materials and engineering sciences, and partial differential equations. It will also be of interest to postdoctoral scientists and advanced postgraduate research students. These proceedings include revised written versions of the majority of papers presented by leading experts at the ICMS Edinburgh Workshop on Differential Geometry and Continuum Mechanics held in June 2013. All papers have been peer reviewed.
Download or read book Continuum Thermodynamics written by Wilmanski and published by World Scientific. This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique presentation of thermodynamic methods of construction of continuous models. It is based on a uniform approach following from the entropy inequality and using Lagrange multipliers as auxiliary quantities in its evaluation. It covers a wide range of models — ideal gases, thermoviscoelastic fluids, thermoelastic and thermoviscoelastic solids, plastic polycrystals, miscible and immiscible mixtures, and many others. The structure of phenomenological thermodynamics is justified by a systematic derivation from the Liouville equation, through the BBGKY-hierarchy-derived Boltzmann equation, to an extended thermodynamics. In order to simplify the reading, an extensive introduction to classical continuum mechanics and thermostatics is included. As a complementary volume to Part II, which will contain applications and examples, and to Part III, which will cover numerical methods, only a few simple examples are presented in this first Part. One exception is an extensive example of a linear poroelastic material because it will not appear in future Parts.The book is the first presentation of continuum thermodynamics in which foundations of continuum mechanics, microscopic foundations and transition to extended thermodynamics, applications of extended thermodynamics beyond ideal gases, and thermodynamic foundations of various material theories are exposed in a uniform and rational way. The book may serve both as a support for advanced courses as well as a desk reference.
Download or read book Continuum Thermodynamics written by Bettina Albers and published by World Scientific. This book was released on 2014-11-12 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second part of Continuum Thermodynamics is designed to match almost one-to-one the chapters of Part I. This is done so that the reader studying thermodynamics will have a deepened understanding of the subjects covered in Part I. The aims of the book are in particular: the illustration of basic features of some simple thermodynamical models such as ideal and viscous fluids, non-Newtonian fluids, nonlinear solids, interactions with electromagnetic fields and diffusive porous materials. A further aim is the illustration of the above subjects by examples and simple solutions of initial and boundary problems as well as simple exercises to develop skills in the construction of interdisciplinary macroscopic models.
Download or read book Continuum Thermodynamics Part I written by Krzysztof Wilmanski and published by World Scientific. This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique presentation of thermodynamic methods of construction of continuous models. It is based on a uniform approach following from the entropy inequality and using Lagrange multipliers as auxiliary quantities in its evaluation. It covers a wide range of models OCo ideal gases, thermoviscoelastic fluids, thermoelastic and thermoviscoelastic solids, plastic polycrystals, miscible and immiscible mixtures, and many others. The structure of phenomenological thermodynamics is justified by a systematic derivation from the Liouville equation, through the BBGKY-hierarchy-derived Boltzmann equation, to an extended thermodynamics. In order to simplify the reading, an extensive introduction to classical continuum mechanics and thermostatics is included. As a complementary volume to Part II, which will contain applications and examples, and to Part III, which will cover numerical methods, only a few simple examples are presented in this first Part. One exception is an extensive example of a linear poroelastic material because it will not appear in future Parts. The book is the first presentation of continuum thermodynamics in which foundations of continuum mechanics, microscopic foundations and transition to extended thermodynamics, applications of extended thermodynamics beyond ideal gases, and thermodynamic foundations of various material theories are exposed in a uniform and rational way. The book may serve both as a support for advanced courses as well as a desk reference.
Download or read book Foundations of Geometric Continuum Mechanics written by Reuven Segev and published by Springer Nature. This book was released on 2023-10-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents the geometric foundations of continuum mechanics. An emphasis is placed on increasing the generality and elegance of the theory by scrutinizing the relationship between the physical aspects and the mathematical notions used in its formulation. The theory of uniform fluxes in affine spaces is covered first, followed by the smooth theory on differentiable manifolds, and ends with the non-smooth global theory. Because continuum mechanics provides the theoretical foundations for disciplines like fluid dynamics and stress analysis, the author’s extension of the theory will enable researchers to better describe the mechanics of modern materials and biological tissues. The global approach to continuum mechanics also enables the formulation and solutions of practical optimization problems. Foundations of Geometric Continuum Mechanics will be an invaluable resource for researchers in the area, particularly mathematicians, physicists, and engineers interested in the foundational notions of continuum mechanics.
Download or read book Mathematical Principles of Mechanics and Electromagnetism written by Chao-cheng Wang and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Generalized Continua written by E. Kröner and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5 The symposium was held in Freudenstadt from 28\h to 31 \ ofAugust st nd 1967 and in Stuttgart from 1 to 2 of September 1967. The proposal to hold this symposium originated with the German Society of Applied Mathematics and Mechanics (GAMM) late in 1964 and was examined by a committee of IUTAM especially appointed for this purpose. The basis of this examination was a report in which the present situation in the field and the possible aims of the symposium were surveyed. Briefly, the aims of the symposium were stated to be 1. the unification of the various approaches developed in recent years with the aim of penetrating into the microscopic world of matter by means of continuum theories; 2. the bridging of the gap between microscopic (or atomic) research on mechanics on one hand, and the phenomenological (or continuum mechanical) approach on the other hand; 3. the physical interpretation and the relation to actual material behaviour of the quantities and laws introduced into the new theories, together with applications; 4. the further development of the theories, where necessary, and the clarification of open questions; 5. a stocktaking of present achievements and the prognosis for future developments. The committee agreed unanimously that the topic of the symposium represented an important phase of current developments in continuum mechanics, from the purely theoretical point of view as well as in connection with possible applications to actual materials.
Download or read book 50 Years of AIMETA written by Giuseppe Rega and published by Springer Nature. This book was released on 2022-06-04 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book retraces the history of the Italian Association of Theoretical and Applied Mechanics (AIMETA) since its establishment in 1965. AIMETA is the official Italian association of mechanics adhering to IUTAM (International Union of Theoretical and Applied Mechanics), which organizes and coordinates a meaningful number of research activities, the most important of which are the biennial National Congress and the internationally renowned journal “Meccanica”, published by Springer. Besides collecting and organizing all related important data and information, as far as possible, by distinguishing among the five scientific areas – general mechanics, solids, structures, fluids, machines – encompassed by AIMETA, the history of the association is assumed as a proper perspective to overview the evolution of theoretical and applied mechanics in Italy over about the last fifty years. This is accomplished in the first part of the book. with also a specific focus on the mechanics of solids and structures, where the biographies of a meaningful number of recognized Italian scholars of mechanics in all areas are also provided, along with testimonials and memories by a few senior people meaningfully involved with AIMETA and Italian mechanics. The second part gives an account, although unavoidably incomplete, of recent developments of mechanical sciences in Italy, as reflected also in the activities of AIMETA and with reference to the international context. Contributions by a number of invited senior scholars, still very active, consist of overviews on some scientific themes in the various areas, summaries of achievements of research groups, expressions of research viewpoints, prospects for future developments.
Download or read book Continuum Thermodynamics Part I Foundations written by Krzysztof Wilmanski and published by World Scientific. This book was released on 2008-11-25 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique presentation of thermodynamic methods of construction of continuous models. It is based on a uniform approach following from the entropy inequality and using Lagrange multipliers as auxiliary quantities in its evaluation. It covers a wide range of models — ideal gases, thermoviscoelastic fluids, thermoelastic and thermoviscoelastic solids, plastic polycrystals, miscible and immiscible mixtures, and many others. The structure of phenomenological thermodynamics is justified by a systematic derivation from the Liouville equation, through the BBGKY-hierarchy-derived Boltzmann equation, to an extended thermodynamics. In order to simplify the reading, an extensive introduction to classical continuum mechanics and thermostatics is included. As a complementary volume to Part II, which will contain applications and examples, and to Part III, which will cover numerical methods, only a few simple examples are presented in this first Part. One exception is an extensive example of a linear poroelastic material because it will not appear in future Parts.The book is the first presentation of continuum thermodynamics in which foundations of continuum mechanics, microscopic foundations and transition to extended thermodynamics, applications of extended thermodynamics beyond ideal gases, and thermodynamic foundations of various material theories are exposed in a uniform and rational way. The book may serve both as a support for advanced courses as well as a desk reference.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1984 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions on Engineering Technologies written by Gi-Chul Yang and published by Springer. This book was released on 2015-05-07 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains fifty-one revised and extended research articles written by prominent researchers participating in the international conference on Advances in Engineering Technologies and Physical Science (London, UK, 2-4 July, 2014), under the World Congress on Engineering 2014 (WCE 2014). Topics covered include mechanical engineering, bioengineering, internet engineering, wireless networks, image engineering, manufacturing engineering and industrial applications. The book offers an overview of the tremendous advances made recently in engineering technologies and the physical sciences and their applications and also serves as an excellent reference for researchers and graduate students working in these fields.
Download or read book Field Equations for Thermoelastic Bodies with Uniform Symmetry written by Chao-Chen Wang and published by Springer. This book was released on 2013-12-19 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Thermomechanics written by Bernard D. Coleman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of papers giving the flavor of current research activities in continuum mechanics, fluid mechanics, thermodynamics and the mathematical analysis related to these topics. Written by leading experts in the field, all the papers in this collection have been carefully refereed according to the standards of the "Archive for Rational Mechanics and Analysis."
